2014 Mini Cooper Clutch Systems

Essential 2014 Mini Cooper Clutch Systems

LuK – Clutch Kit: 9" Disc Diameter, 7/8 " Input Shaft Diameter, 28 Tooth Spline (Part No.03-089)

Clutch Kit: 9" Disc Diameter, 7/8 " Input Shaft Diameter, 28 Tooth Spline

from

$552.99
Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

Valeo – OE Replacement Clutch Kit (Part No.I2030159319VAL)

OE Replacement Clutch Kit

from

$255.09
No other clutch kit supplier can offer components that exceed the OE quality that Valeo offers. Many program repackagers do not offer high percentages of OE specified clutch covers and discs. You can expect long life and smooth engagement from Valeo’s clutches because of our focus on quality. Valeo’s kits contain every component that a technician needs to change out a clutch. Each kit contains a clutch disc assembly, pressure plate cover assembly, release bearing, grease pack, and installation guide. Also included when necessary are a pilot bearing, and technical service bulletin. Valeo’s kits use packaging that is state of the art to ensure that the product arrives and remains free of damage right up to the time it is installed in a vehicle. The extra durable locking tabs ensure product security within its packaging until it is removed for final installation.

Product Features:
  • OE Quality and direct fit application.
  • Long life and smooth engagement.
  • Clutch supplier worldwide to the Original Equipment Manufacturers.
  • Valeo’s kits contain every component that a technician needs to change out a clutch.
See More

LuK – Clutch Kit: 7 7/8" Disc Diameter, 13/16" Input Shaft Diameter, 18 Tooth Spline (Part No.03-061)

Clutch Kit: 7 7/8" Disc Diameter, 13/16" Input Shaft Diameter, 18 Tooth Spline

from

$178.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LUK – Clutch Kit (Part No.I2030722890LUK)

Clutch Kit

from

$367.62
Clutch Kit

LuK – Clutch Master Cylinder (Part No.LMC464)

Clutch Master Cylinder

from

$143.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

FTE – Clutch Master Cylinder (Part No.I3000309719FTE)

Clutch Master Cylinder

from

$171.18
The FTE Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Beck/Arnley – Clutch Master Cycle (Part No.072-9869)

Clutch Master Cycle

from

$118.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Complete new assembly
  • Premium seals and materials
  • Quality construction for durability
  • Application specific for this vehicle
See More

LuK – Clutch Slave Cylinder (Part No.LSC396)

Clutch Slave Cylinder

from

$193.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – Clutch Slave Cylinder (Part No.LSC417)

Clutch Slave Cylinder

from

$87.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – Clutch Slave Cylinder (Part No.LSC621)

Clutch Slave Cylinder

from

$69.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Sachs – Clutch Release Bearing (Part No.I20201144838SAC)

Clutch Release Bearing

from

$71.86
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:
  • Extended service life
  • Compact, lightweight design
  • Sealed for life with high performance, application-specific grease
  • Simplified assembly
  • Integrated functionality
  • Design flexibility
See More

LUK – Release Bearing (Part No.I2020341668LUK)

Release Bearing

from

$56.57
Release Bearing

Sachs – Flywheel (Part No.I1000343984SAC)

Flywheel

from

$889.16
Flywheel

Sachs – Planetary Dual Mass Flywheel (Part No.I1000439987SAC)

Planetary Dual Mass Flywheel

from

$772.08
The SACHS planetary dual mass flywheel incorporates the planetary gear and the torsional damper into the flywheel. For this purpose, the flywheel is divided into a primary and a secondary mass, hence the name planetary dual mass flywheel. Rattle and booming noise are now a thing of the past. SACHS planetary DMF: The advantages for the driver Fuel consumption is reduced, since idle speed is lowered and from idle speed the car can be driven at full throttle. High level of acoustic refinement, due to the suppression of annoying rattling and body boom. Good refinement even during load reversals, thanks to vibration damping. Jolts are eliminated. Improved operating comfort because fewer gear shifts are required. No unpleasant booming noise that would force the driver to make gear shifts too early. Improved gear shift, since lower mass moment of inertia of the clutch disc without torsional damper results in reduced shifting effort.

Product Features:
  • Excellent vibrations damping quality through all engine-speed.
  • Effortless engine start, short start and stop behavior.
  • Good tuning capability thanks to springs in series and spring sets with various stiffness ratings, guided by plastic sliding blocks and spring caps, which keeps the springs from going solid.
  • Planet gears increase the dynamic mass moment of inertia.
  • Grease-filled for long service life.
  • Combination of three mechanisms with damping effect:
  • friction (friction bearings, centrifugal force)
  • vibration damping proportional to speed
  • inertia of planetary gear
  • no special friction device needed
See More

LuK – OE Quality Flywheel (Part No.LFW411)

OE Quality Flywheel

from

$105.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More

LuK – OE Quality Dual Mass Flywheel (Part No.DMF089)

OE Quality Dual Mass Flywheel

from

$466.99
LuK: Don’t gamble – stay with the original DMF! The DMF prevents damages solid flywheels may cause. The Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More

LUK – Flywheel (Part No.I1000248198LUK)

Flywheel

from

$127.14
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.

Product Features:
  • OE quality and direct fit application
  • Made from high quality steel
  • Designed to reduce clutch chatter and vibration
  • Dynamically balanced
See More

LuK – OE Quality Dual Mass Flywheel (Part No.DMF121)

OE Quality Dual Mass Flywheel

from

$1064.99
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More

LuK – OE Quality Flywheel (Part No.DMF200)

OE Quality Flywheel

from

$979.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative
See More

LuK – OE Quality Flywheel (Part No.LFW423)

OE Quality Flywheel

from

$94.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More

Original Equipment – Flywheel Bolt (Part No.I1005669199OEA)

Flywheel Bolt

from

$6.64
The Original Equipment Flywheel Bolt is manufactured in accordance to strict OEM specifications for performance and durability. The Original Equipment flywheel bolt is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE Quality and direct fit application
  • Original Equipment Supplier
See More

2014 Mini Cooper Clutch Systems

You count on your 2014 Mini Cooper to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 16 Clutch Systems ranging in price from $6.64 to $1,110.28, you’re sure to find everything you need for your 2014 Mini Cooper.

Brands matter. If you want to shop a specific Clutch Systems brand, we stock 5 different brands like LuK, FTE, and Sachs. 2014 Mini Cooper Clutch Systems start as low as $6.64!

Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 2014 Mini Cooper below to get started!