2014 Mercedes-Benz SLK55 AMG Brake Parts

Oil Drain Plug Gasket

This ABS wheel speed sensor tone ring directly replaces the original equipment tone ring on certain vehicle years, makes and models for a cost-effective fix.

Product Features:

• Direct replacement – this ABS tone ring matches the fit and function of the stock part on certain vehicle applications
• Effective fix – addresses ABS failure caused by cracked, corroded or fatigued original ring
• Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
• Trustworthy quality – backed by team of designers and engineers in the United States

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

• Triggers a warning light on the dashboard
• Should be replaced each time the brake pad is replaced
• Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

• Triggers a warning light on the dashboard
• Should be replaced each time the brake pad is replaced
• Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Wagner® ThermoQuiet® brake pads feature Wagner OE21 low copper technology, setting new benchmarks for our ceramic brake pad performance. Our brakes feature Integrally Molded Sound Insulator (IMI) that dissipates heat and vibration.

Product Features:

• QUIET PERFORMANCE — Semi-metallic friction material engineered in-house to allow quiet operation and high performance
• EXCEPTIONAL BRAKING POWER — Advanced friction formulations dissipate heat for superior braking performance
• ZERO COPPER FORMULATION — Features Wagner OE25┐ zero-copper friction formulation

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications, provides better value and
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Single layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

• Industry leading number of application specific formulations for maximum performance and extended pad life
• On-vehicle testing similar to original equipment tests
• Patented 4-Layer HEX Shim Technology provides quiet braking
• HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
• Burnishing compound allows for a faster break-in of pads and rotors
• PTFE coated hardware and caliper pin grease included for nearly every application
• Wear sensors included on most European applications that require replacement
• Powder-coated backing plate prevents corrosion

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
• Corrosion resistant coating for long-lasting durability against harsh roads
• Manufactured with quality materials to suppress high stress levels

The Febi/Bilstein Brake Disc Set Screw is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:

• High durability
• Low volume expansion
• 100% high pressure tested and certified quality

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. Brembo UV Coating Technology : Brembo is the first to offer UV coating technology engineered for our leading OE customers with a unique metallic finish developed exclusively for the Aftermarket. The UV coated disc does not require cleaning and degreasing. These discs are ideal for vehicle with alloy wheels and for motorists for whom attention to detail is a prerequisite. High Carbon Discs: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brands foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs. PVT pillar venting technology: ( Vented Rotors Only ) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:

• Metallic finish that maintains a clean and bright appearance over the entire life span of the disc
• Protective coating on braking plate surfaces, external diameter and disc hub to ensure complete protection
• New location for minimum thickness control with greater ease of reading for service professionals
• Water-based paint free of chemical solvents – Energy efficient UV coating process
• Superior to products currently on the market proven by resistance to: Salt spray testing, Humidity and High temperatures BREMBO UV COATED DISCS BROCHURE