2014 Mercedes-Benz E400 Cooling and Climate Controls

Below you will find various in-demand Mercedes-Benz Cooling and Climate Controls, components and accessories for your 2014 E400. Advance Auto Parts has popular E400 parts like Heating Parts, Blower Motor and Related Products, HVAC Electrical Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other E400 model years including 2013, 2015, 2016, 2017, 2018 and more. Select a category of 2014 Mercedes-Benz E400 Cooling and Climate Controls below and start saving instantly.

Popular 2014 Mercedes-Benz E400 Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Thermostat and Water Outlet Assemblies

Coolant Temperature Sensors

Heater Cores

Cabin Air Temperature Sensors

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Engine Coolant Pipe O-Rings

Blower Motor Resistors

AC Condensers

AC Evaporators

AC Caps and Valve Core Kits

Engine Coolant Pipes

AC Receiver Drier Desiccant Elements

Engine Auxiliary Water Pumps

Accumulator and Receiver Driers

ABS Speed Sensors

Radiator Mounts

Water Pump Gaskets

Expansion Valve and Orifice Tubes

HVAC Blower Motor Regulators

AC Compressor Pressure Switches

AC Refrigerant Pressure Sensors

AC Thermal Evaporator Switches

Radiator Cap Tester Adapters

Engine Coolant Reservoir Clip

AC Service Valve Fitting Caps

Essential Cooling and Climate Controls for 2014 Mercedes-Benz E400s

from

$8.05

A/C Schrader Valve C

from

$55.97

ACM is a supplier of Original Equipment quality climate control products.

from

$38.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$29.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$56.99

Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$29.99

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$216.72

The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:

All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.

from

$291.04

Plastic Tank / Aluminum Core Radiator The Valeo radiator meets or exceeds OE specifications and guarantees the same quality and fit as that of the OEM radiator it replaces. The Valeo radiator features a broad core thickness and an advanced fin design for optimum heat transfer.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style mounting brackets and hose connections.
Integrated transmission oil cooler when applicable.
Compact and lightweight.

from

$19.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
Part has a high corrosion resistance for maximum life.
Produced with high quality materials to ensure maximum life and a smooth ride.
Made by the OE manufacturer.

from

$2.14

Oil Filler Cap Gasket

from

$449.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$214.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$181.27

Thermostat Assembly

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$95.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$25.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$41.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$193.99

This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$189.47

Auxiliary Water Pump

from

$69.77

ACM is a supplier of Original Equipment quality climate control products. 3 pin connector

from

$278.28

A/C Evaporator

from

$144.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$513.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

Upgrade your 2014 Mercedes-Benz E400 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2014 Mercedes-Benz E400, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Cooling and Climate Controls are key to keeping your E400 functioning at its best. At Advance Auto Parts, we offer a wide selection of 52 Cooling and Climate Controls for the 2014 Mercedes-Benz E400, designed to meet your needs without breaking the bank. From Heating Part replacements to Blower Motor and Related Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2014 Mercedes-Benz E400 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $2.02 to $513.99, with an average price of $157.61. Our 52 Cooling and Climate Controls in stock come from 20 trusted brands, so you’re sure to find the right part for your 2014 Mercedes-Benz E400 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Mercedes-Benz E400, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. With 298 customer reviews and counting, our 2014 Mercedes-Benz E400 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 Mercedes-Benz E400 is always ready to roll. We’re committed to providing you with everything you need to keep your E400 in top shape, all in one place. Start shopping confidently below for your 2014 Mercedes-Benz E400!

Best-Selling Heating Parts for 2014 Mercedes-Benz E400s

Enhance the driving experience in your Mercedes-Benz with 1 quality Heating Part components, starting at $69.99.

show more show less

from

$69.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Most Popular 2014 Mercedes-Benz E400 Blower Motor and Related Products

Customize your Mercedes-Benz with 4 Blower Motor and Related Products products like Blower Motors, Blower Motor Resistors, and HVAC Blower Motor Regulators, all priced under $460.00.

show more show less

from

$116.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$317.86

Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:

OEM Quality.
Direct Fit Replacement.
Highly efficient
Quiet-running
Meets or exceeds OE design and performance.

from

$460.00

BLOWER MOTOR REGULAT

from

$449.99

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

Top Picks for 2014 Mercedes-Benz E400 HVAC Electrical Parts

Upgrade Mercedes-Benz E400s with top-quality HVAC Electrical Parts parts, including 1 OEM and aftermarket selections for your 2014 model.

show more show less

from

$95.99

In-Demand Air Conditioning Parts for 2014 Mercedes-Benz E400s

Select from 14 premium Air Conditioning Parts parts for your 2014 Mercedes-Benz E400, with prices ranging from $2.92 to $278.28.

show more show less

from

$38.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$25.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$152.99

New Platinum Pro A/C Condenser, 3.0/3.5/4.6/5.5 Liter Engines

Product Features:

3.0/3.5/4.6/5.5 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$144.99

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$69.77

ACM is a supplier of Original Equipment quality climate control products. 3 pin connector

from

$66.87

The ACM A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meet or exceed OEM specifications.
Utilizes the factory style fittings and connectors
Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.

from

$55.97

ACM is a supplier of Original Equipment quality climate control products.

from

$278.28

A/C Evaporator

from

$266.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$214.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$81.51

The Nissens A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meets or exceeds the vehicle manufacturer specifications.
Utilizes factory style fittings and connectors.
Includes the required o-rings and associated hardware

from

$41.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$8.05

A/C Schrader Valve C

from

$2.92

A/C Schrader Valve C

Most Sold 2014 Mercedes-Benz E400 Engine Cooling Parts

Explore our best-selling Mercedes-Benz parts for the 2014 E400 among 32 OEM and aftermarket options starting from $2.02.

show more show less

from

$26.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$19.79

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$19.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$246.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$257.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$193.99

Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$222.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$513.99

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$504.07

Auxiliary Fan Assemb

from

$499.99

This new pump is 100% tested to ensure the highest quality. Each unit is built to meet or exceed all OE specifications and is validated for fit, form, and function. Application specific design to ensure a perfect fit and correct operation for unsurpassed quality.

Product Features:

Electric water pump
Specialized for vehicles using supplemented cooling for the engine or components
Plastic housing
All components necessary for installation are supplied with pump
Follow all enclosed instructions to maximize pump life and validate warranty

from

$441.68

Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style mounting brackets and hose connections.
Integrated transmission oil cooler when applicable.
Compact and lightweight.

from

$422.99

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$387.27

Radiator

from

$306.00

Auxiliary Water Pump

from

$291.04

OE-Equivalent.
Direct fit for easy installation.
OE Style mounting brackets and hose connections.
Integrated transmission oil cooler when applicable.
Compact and lightweight.

from

$252.99

Electric water pump
Specialized for vehicles using supplemented cooling for the engine or components
Plastic housing
All components necessary for installation are supplied with pump
Follow all enclosed instructions to maximize pump life and validate warranty

from

$216.72

All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.

from

$181.27

Thermostat Assembly

from

$56.99

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$29.99

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$20.03

EXPANSION TANK CAP

from

$19.99

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
Part has a high corrosion resistance for maximum life.
Produced with high quality materials to ensure maximum life and a smooth ride.
Made by the OE manufacturer.

from

$15.79

WATER TEMP. SENSOR

from

$15.58

Coolant Pipe

from

$9.76

Radiator Mount

from

$3.99

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
Part has a high corrosion resistance for maximum life.
Produced with high quality materials to ensure maximum life and a smooth ride.
Made by the OE manufacturer.

from

$2.92

Rivet

from

$2.54

Radiator Rivet

from

$2.14

Oil Filler Cap Gasket

from

$2.02

Rivet

Top-Rated Cooling and Climate Controls Brands For Your 2014 Mercedes-Benz E400

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2014 Mercedes-Benz E400s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2014 E400 start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2014 Mercedes-Benz E400 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2014 Mercedes-Benz E400, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2014 Mercedes-Benz E400. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Carquest Premium 2014 Mercedes-Benz E400 Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2014 Mercedes-Benz E400 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2014 E400, Advance Auto Parts carries a full inventory of 16 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $19.79 to $499.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$19.99

This product is not rated

Coolant Temperature Sensor with O-Ring and Install Clip

“”

from
$38.99

This product is not rated

A/C Block Type O-Ring Expansion Valve

“”

from
$246.99

This product is not rated

Radiator: With Transmission Oil Cooler

“”

FAQs for 2014 Mercedes-Benz E400 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2014 Mercedes-Benz E400s?

Out of 52 Cooling and Climate Controls that fit 2014 Mercedes-Benz E400s, the following parts are the top sellers:

Engine Coolant Reservoir Cap (15480047) – $19.79
Coolant Temperature Sensor with O-Ring and Install Clip (12422889) – $19.99
Blower Motor: With Wheel (11575564) – $116.99

What’s the price range for 2014 Mercedes-Benz E400 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2014 Mercedes-Benz E400 start at $2.02 and go up to $513.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2014 Mercedes-Benz E400?

The average price for Cooling and Climate Controls for the 2014 Mercedes-Benz E400 is $157.61. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Mercedes-Benz E400 model years?

Yes, we currently carry Cooling and Climate Controls for 5 model years of Mercedes-Benz E400s between 2013 and 2018. Cooling and Climate Controls are bought most frequently for the following model years: 2018, 2017, 2016, 2015, and 2013.

What are the cheapest Cooling and Climate Controls for my 2014 Mercedes-Benz E400?

The cheapest 2014 Mercedes-Benz E400 Cooling and Climate Controls we carry in stock are:

Rivet (12026625) – $2.02
Oil Filler Cap Gasket (11024296) – $2.14
Radiator Rivet (12488148) – $2.54
Rivet (11990827) – $2.92
A/C Schrader Valve C (11591429) – $2.92

What are the top-rated Cooling and Climate Controls that fit the 2014 Mercedes-Benz E400?

Out of 298 reviews by customers, our 2014 Mercedes-Benz E400 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2014 Mercedes-Benz E400 and their top-rated products:

Engine Cooling Parts
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Engine Coolant Reservoir Cap (15480047) – $19.79
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Blower Motor and Related Products
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Engine Coolant Reservoir Cap (15480047) – $19.79
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99

What types of Cooling and Climate Controls do you sell for my 2014 Mercedes-Benz E400?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2014 Mercedes-Benz E400:

Can I get help with 2014 Mercedes-Benz E400 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Cooling and Climate Controls and more.

What is your return policy for Mercedes-Benz E400 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz E400 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2014 Mercedes-Benz E400 Cooling and Climate Controls

Santech – A/C Schrader Valve C (Part No.R1138570551SII)

ACM – A/C Evaporator Temperature Sensor (Part No.R1071178654ACM)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39211)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83380)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12039)

Rein – Cap-Expansion Tank (Part No.CPE0029P)

Graf – Water Pump (Part No.G30001615025GRA)

Valeo – Radiator (Part No.G1000388524VAL)

Rein – Radiator Mount (Part No.AVM0699)

Elwis – Oil Filler Cap Gasket (Part No.A6150461777ELW)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1887)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA4321)

Wahler – Thermostat Assembly (Part No.G4002454231WAH)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Cabin Air Temperature Sensor (Part No.WTA2085)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83063)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2004)

Dorman – Auxiliary Coolant Pump (Part No.902-065)

Vemo – Auxiliary Water Pump (Part No.G3050551612VMO)

ACM – Air Conditioning Pressure Switch (Part No.R1054445297ACM)

Behr – A/C Evaporator (Part No.R1130303963BEH)

Carquest Premium – A/C Evaporator Parallel Flow (Part No.T64007)

Dorman – Radiator Fan Assembly: Single, With Controller, Cost Effective And Reliable (Part No.621-373)

Carquest Premium – Heater Core (Part No.910684)

Carquest Premium – Blower Motor: With Wheel (Part No.75028)

Behr – Blower Motor (Part No.R2031451452BEH)

Worldpac – BLOWER MOTOR REGULAT (Part No.R2041407488ACM)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1887)

Carquest Premium – Cabin Air Temperature Sensor (Part No.WTA2085)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39211)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83063)

KAI – A/C Condenser (Part No.CND2993)

Carquest Premium – A/C Evaporator Parallel Flow (Part No.T64007)

ACM – Air Conditioning Pressure Switch (Part No.R1054445297ACM)

ACM – ACM A/C Expansion Valve (Part No.R1045399354ACM)

ACM – A/C Evaporator Temperature Sensor (Part No.R1071178654ACM)

Behr – A/C Evaporator (Part No.R1130303963BEH)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714907)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA4321)

Nissens – A/C Receiver Drier (Part No.R1040519701NSS)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2004)

Santech – A/C Schrader Valve C (Part No.R1138570551SII)

ACM – A/C Schrader Valve C (Part No.R1138570550ACM)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10253)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Coolant Temperature Sensor with O-Ring and Install Clip (Part No.WTC1122)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813162)

Motorad – Integrated Thermostat Housing: With Sensor, Spring Clip, Seal, 212 Degrees (Part No.785-212)

Dorman – Auxiliary Coolant Pump (Part No.902-065)

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 217 Degrees (Part No.785-217)

Dorman – Radiator Fan Assembly: Single, With Controller, Cost Effective And Reliable (Part No.621-373)

CoolXPert – Auxiliary Fan Assemb (Part No.G5000441823CXT)

Carquest Premium – New Auxiliary Water Pump (Part No.T1395)

Nissens – Radiator (Part No.G1000388332NSS)

Dorman – Thermostat Assembly: Includes Housing, Sensor, and O-Ring, 217 Degrees (Part No.902-5844)

Autopart International Inc – Radiator (Part No.G10001964285API)

Autopart International Inc – Auxiliary Water Pump (Part No.G30501999571API)

Valeo – Radiator (Part No.G1000388524VAL)

Carquest Premium – New Auxiliary Water Pump (Part No.T1380)

Graf – Water Pump (Part No.G30001615025GRA)

Wahler – Thermostat Assembly (Part No.G4002454231WAH)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12039)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Rein – Cap-Expansion Tank (Part No.CPE0029P)

Worldpac – EXPANSION TANK CAP (Part No.G10403566322BEH)

Rein – Radiator Mount (Part No.AVM0699)

Worldpac – WATER TEMP. SENSOR (Part No.C6020656996FAE)

APA/URO Parts – Coolant Pipe (Part No.G20253123029APA)

Febi – Radiator Mount (Part No.G10201334012FEB)

Rein – RADIATOR MOUNT (Part No.AVM0738)

Febi – Rivet (Part No.Q2001721547FEB)

Aftermarket – Radiator Rivet (Part No.G10183087172AFT)

Elwis – Oil Filler Cap Gasket (Part No.A6150461777ELW)

Febi – Rivet (Part No.Q20011324407FEB)