2014 Lexus RX450h Drivetrains

Essential 2014 Lexus RX450h Drivetrains

National – Axle Shaft Seal (Part No.711097)

Axle Shaft Seal

from

$16.99
Axle Shaft Seal

Dorman – Spindle Nut (Part No.K1002751713DOR)

Spindle Nut

from

$16.08
Spindle Nut

Anchor – Center Support Bearing Motor Mount: Rear, Center, 1 Piece (Part No.6082)

Center Support Bearing Motor Mount: Rear, Center, 1 Piece

from

$119.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to LEXUS 99-20; TOYOTA 01-20;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1999-2020
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 0.10 INCH / 3 MM
  • MOUNT WIDTH: 7.00 INCH / 178 MM
  • STYLE: ROUND FRAME
  • WITH WINGS
  • WITH ELEVATED MOUNTING PLATFORM
See More

Anchor – Center Support Bearing Motor Mount: Front, 1 Piece (Part No.6083)

Center Support Bearing Motor Mount: Front, 1 Piece

from

$108.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to LEXUS 01-20; TOYOTA 01-19;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 2001-2020
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 0.10 INCH / 3 MM
  • MOUNT WIDTH: 7.00 INCH / 178 MM
  • STYLE: ROUND FRAME
  • WITH WINGS
See More

Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-5042)

Rear Drive Shaft: Not Greasable, Direct Replacement

from

$818.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-5036)

Rear Drive Shaft: Not Greasable, Direct Replacement

from

$1257.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Carquest Premium – New CV Axle Assembly (Part No.NCV902651)

New CV Axle Assembly

from

$114.99
Manufactured to be an OE replacement, CV axles use 100% new materials and are engineered for ease of installation and long service.

Product Features:
  • All New Materials
  • Engineered for OE Fitment
  • -40 Degree Rated CV Boots
  • Moly-Blend Grease in inner and outer joints
  • New nut and mounting hardware included if required
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010422408EMP)

RE CV Joint Boot Kit

from

$44.38
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$12.79
Product Features:
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
  • Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
  • Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Idemitsu – Type TLS-LV Automatic Transmission Fluid – 1 qt (Part No.30040096-75000C)

Type TLS-LV Automatic Transmission Fluid - 1 qt

from

$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Exceptional wear protection of gears and bearings
  • Provides superior deposit control and protects metal surfaces from rust and corrosion
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

National – Shaft Repair Sleeve (Part No.99147)

Shaft Repair Sleeve

from

$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010182695EMP)

RE CV Joint Boot Kit

from

$29.75
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010947274EMP)

RE CV Joint Boot Kit

from

$18.63
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Dorman – Spindle Nut M22-1.50 Hex Star Pattern (sold by each) (Part No.615-224)

Spindle Nut M22-1.50 Hex Star Pattern (sold by each)

from

$8.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

NSK – Wheel Hub Assembly (Part No.K7001455126NSK)

Wheel Hub Assembly

from

$223.42
NSK guarantees the high quality of all of their products by repeated, rigorous bench testing, and other checks that take full advantage of their cutting-edge technology, which only the major bearing manufacturers can offer. Double-row angular contact ball bearings with inner and outer mounting flange. NSK Hub unit bearings are designed to meet increasingly strict requirements that demand lighter weight, greater promotion of fuel efficiency, and enhanced module production systems. Double-row angular contact ball bearing with integral inner and outer mounting flange. Easier mounting due to preset preload.

Product Features:
  • Preset optimum preload with easy mounting process
  • High rigidity
  • Easy mounting process NSK offers compact and lightweight hub unit bearings with built-in ABS sensors
  • Integrated sensor rotor (encoder)
  • Compact size and lightweight achieved by utilizing active sensor
See More

National – Multi Purpose Seal (Part No.711075)

Multi Purpose Seal

from

$11.79
Multi Purpose Seal

Ishino Stone – TRANS CASE OUTPUT SF (Part No.J7121452626ISH)

TRANS CASE OUTPUT SF

from

$8.50
TRANS CASE OUTPUT SF

National – Oil Seal (Part No.710954)

Oil Seal

from

$11.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

National – Multi Purpose Seal (Part No.710319)

Multi Purpose Seal

from

$8.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Shaft Repair Sleeve (Part No.99166)

Shaft Repair Sleeve

from

$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Shaft Repair Sleeve (Part No.99210)

Shaft Repair Sleeve

from

$47.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

2014 Lexus RX450h Drivetrains

You count on your 2014 Lexus RX450h to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 21 Drivetrains ranging in price from $8.49 to $1,257.99, you’re sure to find everything you need for your 2014 Lexus RX450h.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 12 different brands like Valvoline, Idemitsu, and Dorman. 2014 Lexus RX450h Drivetrains start as low as $8.49!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 449 extensive product reviews on 2014 Lexus RX450h Drivetrains. Some of the top-rated Drivetrains products we carry are Shaft Repair Sleeve with 4.0 stars and RE CV Joint Boot Kit with 4.0 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2014 Lexus RX450h below to get started!

Top-Rated Drivetrains Brands For Your 2014 Lexus RX450h

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 Lexus RX450h running right for years to come. In our inventory you’ll find brands like Valvoline, Idemitsu, Dorman, and even more.

Popular Valvoline Drivetrains

You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2014 Lexus RX450h back on the road. Some of the top-rated Valvoline products in these categories are:

FAQs for 2014 Lexus RX450h Drivetrains

What are the most purchased Drivetrains for the 2014 Lexus RX450h?

Out of 21 Drivetrains for the 2014 Lexus RX450h, the most popular in our inventory are:
Type TLS-LV Automatic Transmission Fluid - 1 qt
from $14.49
This product is not rated
Type TLS-LV Automatic Transmission Fluid – 1 qt
Differential Oil
Spindle Nut M22-1.50 Hex Star Pattern (sold by each)
from $8.49
This product is not rated
Spindle Nut M22-1.50 Hex Star Pattern (sold by each)
Spindle Lock Nuts
Multi Purpose Seal
from $8.49
This product is not rated
Multi Purpose Seal
Transfer Case Output Shaft Seals

What are the top-rated 2014 Lexus RX450h Drivetrains?

Top-rated Drivetrains for your 2014 Lexus RX450h based on customer reviews/ratings are:
Shaft Repair Sleeve
from $41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
RE CV Joint Boot Kit
from $44.38
(1)
RE CV Joint Boot Kit
“No”