2014 Jeep Wrangler Exhaust System Kits

The MagnaFlow Street Series Axle-Back Performance Exhaust System 15160 15160 brings enhanced engine sound and dyno-proven performance to your 3.6L, 3.8L 2007-2018 Jeep with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15160 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow Competition Series Cat-Back Performance Exhaust System 15118 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.6L 2012-2018 Jeep with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.5in. Satin Welded-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15118 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15118’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

Give your Jeep Wrangler JK a dual exit exhaust system with a DynoMax Super Turbo dual 2.5-in. axle-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow, reduces turbulence and absorbs unwanted interior resonance for a mellow tone.

Product Features:

• COMPATIBILITY : Designed for Jeep Wrangler JK; see product information for compatibility and engine specifications
• PERFORMANCE UPGRADE : Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement
• COMPLETE SOLUTION : Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps
• EASY TO INSTALL : Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding
• IMPROVED FLOW CAPACITY : Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
• PRECISION DESIGN : Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications
• PREMIUM PERFORMANCE : Large flow tubes improve exhaust flow and reduce backpressure
• ENGINEERED TO LAST: Stainless-steel muffler reduces corrosion and internal drainage system reduces moisture collection
• SPECS : 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tips

The Scorpion Aluminized Hi-Tuck “Rock Basher” (RB) Cat-Back Exhaust System is constructed of 2-1/2″ mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with a 18″ length chambered muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Two Piece Design
• Performance Tip
• Mandrel Bent Aluminized Steel
• OE Style Bayonet Hangers

The Scorpion Aluminized Hi-Tuck “Rock Basher” (RB) Cat-Back Exhaust System is constructed of 2-1/2″ mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with a 18″ length chambered muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Two Piece Design
• Performance Tip
• Mandrel Bent Aluminized Steel
• OE Style Bayonet Hangers

aFe power introduces the Hi-Tuck “Rock Basher” (RB) Scorpion cat-back exhaust system for 2007-2018 Jeep Wrangler (JK) 2 and 4 door models. Constructed of 2-1/2″ mandrel-bent aluminized steel tubing, the smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system includes a 14″ length, 409 stainless steel, high-flow muffler to absorb high pitch tones producing a powerful sound. All necessary hardware is included for a hassle-free installation. Fits with most aftermarket Evap skid plates. Flow and Performance: Constructed of 2-1/2″ mandrel-bent, aluminized steel tubing for maximum flow, performance and value. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. Forward Muffler Location: This Scorpion Hi-Tuck system incorporates a high flow 14″ length muffler for an aggressive sound while eliminating exhaust drone. The muffler is located prior to the rear axle for increased climbing angles. And is perfect for adding an on-board air compressor system to the underside of your Jeep. If you are considering an on-board air compressor kit, you need to use this system. Compatible with aFe Power’s Glide Guard (Part Number: 46-79001) Hi-Tuck Tip: This exhaust system is finished off with a Hi-Tuck Tip that is developed to give your Jeep extra clearance during extreme angle climbs or descents. Aggressive Sound: A 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle. Perfect Fit: An included extension pipe allows this system to fit both the 2 and 4 door Wranglers without modification. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit.

Product Features:

• 2.5 in. Mandrel Bent Aluminized Steel Tubing
• Hi-Tuck Design To Provide Max. Clearance
• 409 Stainless Steel High-Flow Muffler
• Bayonet Styles Hangers And Heavy Duty Band Clamps

EXHAUST SYSTEM KIT

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19327 brings out the personality of your 3.6L 2012-2018 Jeep with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19327 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19327 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19326 brings out the personality of your 3.6L 2012-2018 Jeep with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19326 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19326 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2″ with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2″ MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22″ free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Unique Dual Center Exit Exhaust System
• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• Unique Dual Center Exit Exhaust System
• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation

aFe’s Rebel Series, dual black tip axle-back exhaust system for your 2007 – 2018 Jeep Wrangler (JK) with the V6-3.8L / 3.6L engine. This Rebel Series system is constructed with 2-1/2″ mandrel bent 409 stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, the bayonet tip hangers ensure the Rebel Series exhaust has an OE-style fit and stays put under any driving conditions. A certified craftsman hand MIG welds the system for durability and longevity. High quality band clamps and hardware to provide a quick, hassle-free installation with no modifications necessary. Dual 4-1/2″ angle-cut, high temp metallic black stainless steel exhaust tips with laser-cut aFe POWER badges to finish off the Rebel Series exhaust system for the perfect combination of performance, value and style. Aggressive Sound: A free-flowing, stainless steel, 18″ length muffler is used to absorb high pitch tones producing a powerful sound and unleashing more horsepower and torque potential. Dual 4-1/2″ Black Exhaust Tips: This dual rear-exit system features 4-1/2″ dia. high temp metallic black, angle-cut, rolled, stainless steel exhaust tips w/ laser-cut aFe POWER badge for a custom-styled look. Installation is a snap: This Rebel Series exhaust system uses all factory mounting locations providing stability and a hassle-free installation. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface.

Product Features:

• Mandrel Bent 409 Stainless Steel
• Free Flowing Stainless Steel Muffler
• Dual Rear Exit High Temp Metallic Black Exhaust Tips
• High Quality Hardware and Clamps

The MagnaFlow JK Jeep Wrangler Overland Series Cat-Back Performance Exhaust System No. 19539 will inject your Jeep Wrangler JK Unlimited (2012-2018) with MagnaFlow’s deep signature sound and dyno-proven performance. MagnaFlow exhaust kit No. 19539 is weight optimized for improved utility and features a single straight-through muffler with 2.5″ mandrel bent main piping that fits closer to the undercarriage of the vehicle compared to the stock configuration. This combined with a no-tip, high clearance driver side rear exit greatly enhances your JK Jeep Wrangler’s ground clearance and departure angles. The exhaust system was designed to be compatible with the most popular bolt-on aftermarket modifications. Each system incorporates MagnaFlow’s No Drone Technology, which mitigates interior noise by cancelling out the natural droning frequencies produced by your JK Jeep Wrangler at cruising speeds while retaining the character of your engine’s exhaust note. CNC precision robotic manufacturing techniques enable perfect fitment and allow for hassle-free bolt-on installation. MagnaFlow No. 19539 is made entirely of durable stainless steel and backed by MagnaFlow’s limited construction warranty.

Product Features:

• No-Drone-Technology (NDT) allows for a quiet cabin
• Dyno proven performance
• High clearance exit

The MagnaFlow Competition Series Cat-Back Performance Exhaust System 15117 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.6L 2012-2018 Jeep with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.5in. Satin Welded-On Single Wall Angle Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15117 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15117’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100 percent durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

This MACH Force XP Hi-Tuck “RB” Cat-Back exhaust system is constructed of 2.5″ mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response.

Product Features:

• Hi-Tuck Cat Back
• 409 Stainless Steel
• MIG-Welded
• 2.5 in. Dia. Mandrel-Bent Tubing

The MagnaFlow Rock Crawler Series Cat-Back Performance Exhaust System 15236 brings superior boulder-climbing capabilities to your 3.6L 2012-2018 Jeep with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 15236 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 15236’s emissions-legal cat-back design replaces all your rig’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 15236 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited warranty.

Product Features:

• Extensive off-road testing to meet your sound and performance needs
• Aggressive exterior sound tuning
• High clearance design

aFe power introduces the Hi-Tuck “Rock Basher” (RB) Cat-Back Exhaust System for 2007-2017 Jeep Wrangler (JK) with V6-3.6L/3.8L engines 2 and 4 door models. This cat-back exhaust system is constructed of 2-1/2″ mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with a 18″ length high-flow straight through designed muffler to absorb high pitch tones producing a powerful sound. All necessary hardware is included for a hassle-free installation. This unit fits with most after market Evap skid plates. Flow and Performance: This MACH Force-Xp cat-back exhaust system is constructed of 2-1/2″ mandrel-bent, 409 stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. Forward Muffler Location: This system incorporates a high flow 18″ length muffler for a quieted sound while eliminating exhaust drone. The muffler is located prior to the rear axle for increased climbing angles. Hi-Tuck Tip: This exhaust system is finished off with a Hi-Tuck Tip that is developed to give your Jeep extra clearance during extreme angle climbs or descents. Perfect Fit: An included extension pipe allows this system to fit both the 2 and 4 door Wranglers without modification. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Aggressive Sound: A 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• High Flow 409 Stainless Steel Straight Thru Muffler
• Bayonet Style Hangers
• Heavy Duty Band Clamps For A Secure Fit

Creates maximum performance and extreme mileage gains. The free flowing rear side exit exhaust system is constructed out of 2.25 in. mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a hassle free installation. Fits both the slip-fit and flange-fit cats. Uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface eliminating leak paths. A straight through designed; free flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• Simple 1-Piece Design
• Free Flow Muffler
• Hi-Tuck Tip

The MagnaFlow Off-Road Pro Series Cat-Back Performance Exhaust System 17143 brings additional off-roading prowess and our deep signature exhaust note to your 3.6L 2012-2018 Jeep with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17143 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17143’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17143 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• High flow straight through design
• 100 percent Stainless Steel

The Scorpion Aluminized Hi-Tuck “Rock Basher” (RB) Cat-Back Exhaust System is constructed of 2-1/2″ mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with a 18″ length chambered muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Two Piece Design
• Performance Tip
• Mandrel Bent Aluminized Steel
• OE Style Bayonet Hangers

This durable, purpose-built, cat-back exhaust system improves clearance over rough terrain for the Jeep JK adventurist who wants it all. Large, 2 ½” to 3″ mandrel-bent 409 stainless steel tubing outflows the restrictive OE exhaust to increase torque and horsepower while a free-flowing muffler delivers a powerful, performance tone. The ROCK BASHER’S unique pre-axle turn down tip handles off-road obstacles and utilizes factory mounts for a quick and simple install. This cat-back exhaust system has a turn down tip under the vehicle, before the rear axle, to take on rough terrain and off-road obstacles. No more smashed tips. An 18″ long, free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound while unleashing all available horsepower and torque.

Product Features:

• Free Flowing Stainless Steel Muffler
• Aggressive Sound
• MIG Welded For Strength
• Steel Band Clamps

Give your 2012-2018 Jeep Wrangler JK exhaust system an upgrade with the original stainless-steel RockCrawler cat-back system from DynoMax. Comes with a DynoMax Ultra Flo SS polished muffler that features stainless-steel construction that delivers lasting protection and show-quality shine.

Product Features:

• COMPATIBILITY : Designed for 2012-2018 four-door Jeep Wrangler JK 3.6L V6
• PERFORMANCE UPGRADE : Enhance your vehicle’s exhaust system with this high clearance off-road RockCrawler design kit that can give an 11HP and 12-Lb. Ft. torque improvement
• COMPLETE SOLUTION : Includes DynoMax Ultra Flo SS polished muffler, intermediate pipe, tail pipe, tip with band clamp and all necessary clamps
• IMPROVED FLOW CAPACITY : 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
• PREMIUM ACOUSTIC CONTROL : Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
• SUPERIOR PERFORMANCE : Straight-through muffler design ensures unrestricted exhaust flow and reduces back pressure
• SPECS : 3-in. Outlet, single wall, buffed and polished stainless-steel slant cut tip
• NOTES : Tail pipe exits in rear

aFe power introduces the Hi-Tuck “Rock Basher” (RB) Cat-Back Exhaust System for 2007-2017 Jeep Wrangler (JK) with V6-3.6L/3.8L engines 2 and 4 door models. This cat-back exhaust system is constructed of 2-1/2″ mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with a 18″ length high-flow straight through designed muffler to absorb high pitch tones producing a powerful sound. All necessary hardware is included for a hassle-free installation. This unit fits with most after market Evap skid plates. Flow and Performance: This MACH Force-Xp cat-back exhaust system is constructed of 2-1/2″ mandrel-bent, 409 stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. Forward Muffler Location: This system incorporates a high flow 18″ length muffler for a quieted sound while eliminating exhaust drone. The muffler is located prior to the rear axle for increased climbing angles. Hi-Tuck Tip: This exhaust system is finished off with a Hi-Tuck Tip that is developed to give your Jeep extra clearance during extreme angle climbs or descents. Perfect Fit: An included extension pipe allows this system to fit both the 2 and 4 door Wranglers without modification. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Aggressive Sound: A 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• Round High Flow Stainless Steel Muffler
• Fits Stock and Most Aftermarket Axle-Back Systems
• Utilizes Factory Mounting Locations

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0947 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0947’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0947 features durable aluminized steel construction. BRExhaust 106-0947 is engineered for OEM 5147214AD exhaust replacement.

Product Features:

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance

Designed to prevent contact between the exhaust crossover pipe and the front driveshaft, this DynoMax exhaust pipe kit is designed for 2012-2018 Jeep Wrangler JK. Allows more driveshaft clearance and suspension down travel than exhaust spacers.

Product Features:

• COMPATIBILITY : Designed for 2012-2018 Jeep Wrangler 3.6L V6 with 2-in. to 5-in. front raised suspension height
• ADDS CLEARANCE : Helps prevent contact between the exhaust crossover pipe and front driveshaft while allowing more driveshaft clearance and suspension down travel than exhaust spacers
• IMPROVED FLOW CAPACITY : Mandrel bends improve flow capacity over traditional bends
• PREMIUM MATERIALS: Made from T-409 stainless steel for durability and long life
• COMPLETE SOLUTION : Includes all necessary clamps, hardware and detailed installation instructions; may require cutting

Adding 2.5″ or more lift to your 2012-2018 Wrangler JK V6-3.6L will change your vehicles driveline and can create clearance problems between your driveshaft and factory exhaust. aFe’s 304SS exhaust spacers are a great problem-solver which moves the factory y-pipe rearward to prevent contact between the driveshaft and exhaust during extended suspension travel. This spacer kit is NOT required if using aFe Twisted Steel Y-pipe. JK models with Long-Arm lift kits will require increased clearance. aFe’s 2″ Loop Relocation Pipe (PN 48-48021) will accommodate this clearance issue without compromising sound or performance.

Product Features:

• Heavy Wall DOM 304SS Tubing For Longevity
• Direct Fit To OE Exhaust
• No Modifications To Stock System
• Incl. Stainless Steel Hardware