2014 Jaguar XJR Oil and Lubricants

Essential Oil and Lubricants for 2014 Jaguar XJRs

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart

from

$18.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:
  • FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon

from

$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Castrol – GTX 10W-30 High Mileage Synthetic Blend Motor Oil, 5 Quart (Part No.1597B0)

GTX 10W-30 High Mileage Synthetic Blend Motor Oil, 5 Quart

from

$30.99
Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:
  • Phosphorus Replacement Technology helps extend emission system life
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (1)
  • Seal conditioners to help reduce leaks
  • Advanced additives that minimize engine wear
  • Improved fuel economy (2)
  • (1) Based on API and ACEA volatility specifications
  • ILSAC GF-6
  • (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
See More

Pennzoil – Full Synthetic 5W-40 Engine Oil – Helps Extend Engine Life – 1 Qt Bottle (Part No.550051120)

Full Synthetic 5W-40 Engine Oil - Helps Extend Engine Life - 1 Qt Bottle

from

$11.49
Pennzoil Platinum Euro is designed for complete protection and performance for European vehicles. Pennzoil Platinum Euro helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed.1 Pennzoil Platinum Euro is made from natural gas, not crude. Its base oil is 99.5% free from engine clogging impurities. The Proof is in the Pennzoil. 1 Based on Sequence IIIH results . Does not apply to Pennzoil Platinum Euro motor oil.

Product Features:
  • No other leading engine oil provides better protection from friction1? 1 based on sequence iva wear test using sae 0w-40.
  • Better fuel economy2 2 meets the requirements of mb 229.5 which includes fuel economy improvement (fei) requirement as determined in industry standard gasoline engines
  • Protects horsepower
  • Nothing keeps your engine close to factory clean3 3 based on sequence vh and m-111 sludge test using sae 0w-40.
  • Complete protection and performance for European vehicles.
  • Extends engine life and protects for up to 15 years or 500,000 miles, whichever comes first.
See More

Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil, 5 Quart (Part No.15980E)

GTX High Mileage 5W-30 Synthetic Blend Engine Oil, 5 Quart

from

$30.99
Castrol GTX High Mileage 5W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:
  • Phosphorus Replacement Technology helps extend emission system life
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (1)
  • Seal conditioners to help reduce leaks
  • Advanced additives that minimize engine wear
  • Improved fuel economy (2)
  • (1) Based on API and ACEA volatility specifications
  • MB-Approval 229.5
  • (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C946-B1
  • Meets Ford WSS-M2C961-A1
See More

Pentosin – Super Performance III 5W-30 Full Synthetic Motor Oil, Exceeds API SM,CF; ACEA A3,B3,B4,C3, 1 Liter (Part No.8078106)

Super Performance III 5W-30 Full Synthetic Motor Oil, Exceeds API SM,CF; ACEA A3,B3,B4,C3, 1 Liter

from

$21.99
5W-30 Pento Super Performance III is a newly formulated high performance engine oil designed to be used in vehicles that call for extended oil drain intervals. This oil is blended by using some of the most modern additives available and carefully selected synthetic based oils. By doing this the oil is considered a Low SAPS formulation that preserves catalysts, the environment, and maintains outstanding engine performance.

Product Features:
  • An all- season motor oil offering great protection against harsh start-up conditions and extreme temperature changes.
  • Formulated for long service life intervals.
  • Reduces motor oil sludge and fuel deposits.
  • Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
  • High Performance Formula: The 5W-30 Pento Super Performance III is a newly formulated high performance engine oil designed for vehicles with extended oil drain intervals.
  • Advanced Additives: Blended using some of the most modern additives available, ensuring superior engine protection and performance.
  • Full Synthetic Composition: Made with carefully selected synthetic-based oils, providing excellent lubrication and stability.
  • Low SAPS Formulation: This oil is a Low SAPS (Sulfated Ash, Phosphorus, and Sulfur) formulation, which helps preserve catalytic converters and is environmentally friendly.
  • Exceeds Industry Standards: SP III 5W-30 Synthetic Motor Oil exceeds API SM, CF; ACEA A3, B3, B4, C3 standards, ensuring top-notch quality and reliability.
See More

FRAM – 10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 1 Quart (Part No.F670)

10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 1 Quart

from

$6.49
FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Sludge Cleanup: Formulated to help clean out sludge buildup, keeping engines running clean and with increased efficiency and power.
  • Versatile Compatibility: Suitable for gasoline and light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Industry Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.
See More

Castrol – EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil, 1 Quart (Part No.154BC4)

EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil, 1 Quart

from

$12.49
CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1 quart container.

Product Features:
  • Optimized to deliver 40% better performance than required by acea standards.
  • Recommended by world leading auto manufacturers
  • Engine protection for the entire drain interval even under extreme pressure of high output engines
  • Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
  • Formerly known as castrol slx
  • Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.
See More

Castrol – EDGE High Mileage 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15979F)

EDGE High Mileage 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart

from

$12.99
Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:
  • Phosphorus Replacement Technology to help extend the life of the emission system
  • Reduces leaks, oil burnoff and power robbing deposits
  • 15,000 miles between oil changes (1)
  • (1) Or one year, whichever comes first
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C960-A1
  • Meets engine test requirements of Chrysler MS 6395
  • Meets Ford WSS-M2C946-B1
  • Meets Ford WSS-M2C961-A1
See More

FRAM – High Milage Conventional 5W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (Part No.F660)

High Milage Conventional 5W-30 Motor Oil - Helps Restore Seal Condition, 1 Quart

from

$6.49
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
See More

Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6A)

GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 1 Quart

from

$10.49
Castrol GTX High Mileage 5W-30 is the #1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:
  • Phosphorus Replacement Technology helps extend emission system life
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (1)
  • Seal conditioners to help reduce leaks
  • Advanced additives that minimize engine wear
  • Improved fuel economy (2)
  • (1)Based on API and ACEA volatility specifications
  • Approved for BMW M-Models
  • (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C946-B1
  • Meets Ford WSS-M2C961-A1
See More

FRAM – 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (Part No.F630)

10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart

from

$6.49
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-Speed Pre-Ignition Control
  • Chain Wear Protection
  • Piston Cleanliness
  • Turbo-Compatibility
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
  • High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
  • Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
  • SAE oil weight of 10W-30, making it a dependable choice for various engine types.
See More

Mobil 1 – ESP 5W-30 Full Synthetic Motor Oil, Reduces Deposits, 1 Quart (Part No.47112)

ESP 5W-30 Full Synthetic Motor Oil, Reduces Deposits, 1 Quart

from

$11.99
Mobil 1 ESP 5W-30 is an advanced full synthetic oil specially formulated for passenger car diesels that have the latest diesel particulate filters (DPFs) and gasoline catalytic converters (CATs). The proprietary full synthetic motor oil is designed to help deliver outstanding performance and protection in conjunction with potential fuel economy benefits. Mobil 1 ESP has active cleaning agents that help to reduce deposits and sludge buildup for a cleaner engine. Helps to reduce oil aging with outstanding oxidation stability for extended drain interval protection. Low ash, sulfur, and phosphorous content help to reduce particulate buildup in DPFs and reduce poisoning of CATs. Excellent low temperature capabilities for quick cold-weather starting and ultra-fast protection. Mobil 1 is America’s leading synthetic motor oil brand at retail(1), recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending July 1, 2023)

Product Features:
  • Mobil 1 ESP 5W-30 full synthetic oil is formulated for passenger car diesels with diesel particulate filters (DPFs) and gasoline catalytic converters (CATs)
  • Low ash, sulfur, and phosphorous content help to reduce particulate build up in DPFs
  • Active cleaning agents that help to reduce deposits and sludge buildup for a cleaner engine
  • Helps to reduce oil aging with outstanding oxidation stability for extended drain interval protection
  • Excellent low temperature capabilities for quick cold-weather starting and ultra-fast protection
  • Manufacturer Part Number: 127568
  • Outstanding Performance and Protection: Designed to deliver exceptional performance and protection, with potential fuel economy benefits.
See More

Mobil 1 – Extended Performance 5W-30 Full Synthetic Motor Oil, 5 Quart (Part No.14977)

Extended Performance 5W-30 Full Synthetic Motor Oil, 5 Quart

from

$41.99
If you trust your vehicle to be there for you, you need to be there for its engine, with Mobil 1 Extended Performance full-synthetic motor oil 5W-30. Our ultimate full-synthetic motor oil meets or exceeds the industry’s toughest standards to help you get the most from your engine for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US.(2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending Feb 25, 2023)

Product Features:
  • Mobil 1 Extended Performance full-synthetic motor oil 5W-30 helps protect critical engine parts for up to 20,000 miles between oil changes,(1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
  • Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
  • Manufacturer Part Number: 120766
  • Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines in passenger cars, SUVs, light vans, and light trucks.
  • Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.
  • Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®.
See More

Castrol – EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C7E)

EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 1 Quart

from

$12.49
Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:
  • 1.2X Better viscosity control to help engines run better for longer (1)
  • 2X Better engine cleanliness to help maximize engine performance (1)
  • (1) As measured in DV6 test vs. test limit
  • Approved and licensed specifications:
  • ACEA A3/B4
  • API SP
  • BMW Longlife-01
  • MB-Approval MB 229.5
  • Renault RN0700 / RN0710
  • VW 502 00 / 505 00
  • Meets engine test requirements of Chrysler MS 12991
See More

FRAM – Conventional 20W50 Engine Oil – Low-Speed Pre-Ignition Control – 5 Qt (Part No.F650-5QT)

Conventional 20W50 Engine Oil - Low-Speed Pre-Ignition Control - 5 Qt

from

$25.99
FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional 20W50 5 QT utilizes a blend of high-quality conventional base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Castrol – GTX 10W-40 Conventional Motor Oil, 1 Quart (Part No.14CD5A)

GTX 10W-40 Conventional Motor Oil, 1 Quart

from

$9.99
Castrol GTX 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against engine sludge
  • Premium quality base oils and anti-wear additives to help extend the life of your engine
  • Helps minimize oil consumption
  • (1) When tested in engines with a high level of sludge
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
See More

Pentosin – HP II 5W-40 Synthetic Engine Oil exceeds service class API SM ACEA A3,B4 (Part No.8042107)

HP II 5W-40 Synthetic Engine Oil exceeds service class API SM ACEA A3,B4

from

$28.49
Pentosin HP II 5W-40 Synthetic Motor Oil is a high-performance engine oil that is designed to provide excellent protection for your vehicle all year round. This fully synthetic oil is formulated to offer longer changing intervals, reduce motor oil sludge and fuel deposits, and preserve the catalyst and the environment. It contains special friction modifiers that help to improve fuel efficiency and maintain outstanding engine performance. Pentosin HP II 5W-40 Synthetic Motor Oil exceeds service class API SM ACEA A3,B4, making it an ideal choice for drivers who demand the best from their vehicles. Whether you’re driving in extreme temperatures or under heavy loads, Pentosin HP II 5W-40 Synthetic Motor Oil will help keep your engine running smoothly and efficiently.

Product Features:
  • An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
  • Formulated for long service life intervals.
  • Reduces engine oil sludge and fuel deposits.
  • Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
  • Fully Synthetic Oil Composition: PENTO HP II 5W-40 1L is made up of fully synthetic oil composition, which provides superior protection to the engine and ensures longer engine life.
  • Longer Changing Intervals: The newly formulated PENTO HP II 5W-40 1L allows for longer changing intervals, which means less frequent oil changes and reduced maintenance costs.
See More

Mobil 1 – 5W-30 High Mileage Full Synthetic Motor Oil – Protection for 10K Miles, 5 Quart (Part No.120769)

5W-30 High Mileage Full Synthetic Motor Oil - Protection for 10K Miles, 5 Quart

from

$38.99
Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 5W-30. This formula utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup-keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks-including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is Americas No. 1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing, results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending July 1, 2023)

Product Features:
  • Mobil 1 High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.(1)
  • Utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
  • Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
  • Manufacturer Part Number: 120769
  • Extended Engine Life: This high mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes.
  • Temperature Control: Proven to cool engine temperatures by over 10%, Mobil 1 helps to keep your engine running at lower temperatures compared to conventional oil.
  • Oxidation Control: Mobil 1 High Mileage motor oil helps control oxidation to prevent oil breakdown, ensuring long-lasting performance and protection.
  • Versatile Compatibility: Recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines.
See More

FRAM – 10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart (Part No.464-32)

10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

from

$7.29
10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

Castrol – EDGE High Mileage 5W-20 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15979D)

EDGE High Mileage 5W-20 Advanced Full Synthetic Motor Oil, 1 Quart

from

$12.99
Castrol EDGE High Mileage 5W-20 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:
  • Phosphorus Replacement Technology to help extend the life of the emission system
  • Reduces leaks, oil burnoff and power robbing deposits
  • 15,000 miles between oil changes (1)
  • (1) Or one year, whichever comes first
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets engine test requirements of Chrysler MS 6395
  • Meets Ford WSS-M2C945-B1
  • Meets Ford WSS-M2C960-A1
See More

Mobil Super – 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.98010)

5W-30 Synthetic Blend Motor Oil, 5 Quart

from

$25.99
Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes. Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced motor oil formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Available in 1-qt. and 5-qt. bottles, Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. (Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ 52 weeks ending January 2, 2021)

Product Features:
  • Mobil 1 advanced full synthetic motor oil 5W-30 helps to protect your engine from the five factors that can damage engines over time
  • Helps to protect critical engine parts for up to 10,000 miles between oil changes, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
See More

Castrol – EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C3C)

EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart

from

$11.99
Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:
  • 3X Stronger than the leading full synthetic (1)
  • 10X Better high stress performance (2)
  • 20,000 miles between oil changes (3)
  • (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
  • (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
  • (3) Or one year, whichever comes first
  • Approved and Licensed Specifications:
  • ACEA A5/B5, C2
  • Exceeds API SP/SN PLUS/SN/SM
  • GM dexos1 Gen 3
  • Meets engine test requirements of Chrysler MS 6395
  • Meets Ford WSS-M2C946-B1
  • Meets Ford WSS-M2C961-A1
See More

FRAM – Conventional 10W40 Engine Oil with Low-Speed Pre-Ignition Control, 5 Quart (Part No.F640-5QT)

Conventional 10W40 Engine Oil with Low-Speed Pre-Ignition Control, 5 Quart

from

$25.99
FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

Castrol – EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.15B6FE)

EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 5 Quarts

from

$37.99
Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:
  • 1.2X Better viscosity control to help engines run better for longer (1)
  • 2X Better engine cleanliness to help maximize engine performance (1)
  • (1) As measured in DV6 test vs. test limit
  • Approved and licensed specifications:
  • ACEA A3/B4
  • API SP
  • BMW Longlife-01
  • ILSAC GF-6
  • MB-Approval MB 229.5
  • Renault RN0700 / RN0710
  • VW 502 00 / 505 00
  • Meets engine test requirements of Chrysler MS 12991
See More

FRAM – Full Synthetic 10W-30 Motor Oil – Helps Extend Motor Life, 1 Quart (Part No.F940)

Full Synthetic 10W-30 Motor Oil - Helps Extend Motor Life, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.
See More

Castrol – EDGE Euro Car 0W-30 A3/B4 Full Synthetic Motor Oil, 1 Quart (Part No.152B99)

EDGE Euro Car 0W-30 A3/B4 Full Synthetic Motor Oil, 1 Quart

from

$11.99
CASTROL EDGE Euro Car 0W-30 A3/B4 Full Synthetic Motor Oil 1 Quart is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to meet the European OEM gasoline specifications for Mercedes-Benz and VW/Audi. It is optimized to deliver 40% better performance than other synthetic oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SL, ACEA A3/B4, MB Approval 229.3, and VW 502 00/505 00 specifications. With its unique formulation, Castrol EDGE Euro Car 0W-30 A3/B4 Full Synthetic Motor Oil transforms under pressure, increasing film strength to prevent oil breakdown & reduce friction to unlock maximum performance.

Product Features:
  • Optimized to deliver 40% better performance than required by acea standards.
  • Recommended by world leading auto manufacturers
  • Engine protection for the entire drain interval even under extreme pressure of high output engines
  • Meets api cf/sl, acea a3/b4, mb approval 229.3/229.5, vw 502 00/505 00
  • SYNTEC Technology: The reformulated EDGE Engine Oil features SYNTEC Technology, which enhances its performance and provides even better protection for your engine.
  • Full Synthetic Composition: The EDGE Engine Oil is composed of full synthetic oil, which provides superior protection against engine wear and tear, and helps to extend the life of your engine.
See More

FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)

Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control - 5 Qt

from

$25.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
See More

Upgrade your 2014 Jaguar XJR with Top-Quality Oil and Lubricants

When it comes to maintaining or upgrading your 2014 Jaguar XJR, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jaguar or enhancing its overall performance, Oil and Lubricants are key to keeping your XJR functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Oil and Lubricants for the 2014 Jaguar XJR, designed to meet your needs without breaking the bank. From Motor Oil replacements to Greases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Oil and Lubricants for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Oil and Lubricants for your 2014 Jaguar XJR at great prices. Our Oil and Lubricants inventory for this model ranges from just $6.49 to $59.99, with an average price of $21.37. Our 12 Oil and Lubricants in stock come from 2 trusted brands, so you’re sure to find the right part for your 2014 Jaguar XJR without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Jaguar XJR, we stock popular OEM and aftermarket Oil and Lubricants from top names like Valvoline, and more. Valvoline Oil and Lubricants start at just $18.99 and boast an impressive 5 stars average rating from customers. With 728 customer reviews and counting, our 2014 Jaguar XJR Oil and Lubricants have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Oil and Lubricant upgrades. Explore related part types like Fluids and Chemicals, Alternators and Starters and more to make sure your 2014 Jaguar XJR is always ready to roll. We’re committed to providing you with everything you need to keep your XJR in top shape, all in one place. Start shopping confidently below for your 2014 Jaguar XJR!

Best-Selling Motor Oil for 2014 Jaguar XJRs

Enhance the driving experience in your Jaguar with 10 quality Motor Oil components, starting at $6.49.

FRAM – 5W-20 Full Synthetic Motor Oil, Faster Oil Flow, 5 Quart (Part No.F920-5QT)

5W-20 Full Synthetic Motor Oil, Faster Oil Flow, 5 Quart

from

$27.99
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
See More

FRAM – Full Synthetic 0W20 Engine Oil – Helps Extend Engine Life – 5 Qt (Part No.F900-5QT)

Full Synthetic 0W20 Engine Oil - Helps Extend Engine Life - 5 Qt

from

$27.99
FRAM Engine Oil Full Synthetic SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 0W-20 and is a fully licensed GM dexos1 Gen 2 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability, lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Ultimate engine protection: FRAM Full Synthetic 0W20 5 QT is specifically formulated to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine.
See More

FRAM – Full Synthetic High Mileage 0W-20 Engine Oil: 5 Quart (Part No.F913-5QT)

Full Synthetic High Mileage 0W-20 Engine Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

FRAM – Full Synthetic High Mileage 5W-20 Motor Oil: 5 Quart (Part No.F923-5QT)

Full Synthetic High Mileage 5W-20 Motor Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Protection for High Mileage Engines: Designed for engines with over 75,000 miles, this oil provides the ultimate protection, making it ideal for higher mileage vehicles.
  • Advanced LSPI Prevention Technology: Contains additive technology to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines, helping to prevent premature engine fai
See More

FRAM – 5 Qt Conventional 5W20 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F610-5QT)

5 Qt Conventional 5W20 Engine Oil with Low-Speed Pre-Ignition Control

from

$25.99
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 5W-20 Full Synthetic Motor Oil, Extends Full Synthetic Motor Life, 1 Quart (Part No.F920)

5W-20 Full Synthetic Motor Oil, Extends Full Synthetic Motor Life, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) & turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Faster oil flow at start-up!
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
See More

FRAM – 5W-20 Conventional Motor Oil, with Low-Speed Pre-Ignition Control 1 Quart (Part No.F610)

5W-20 Conventional Motor Oil, with Low-Speed Pre-Ignition Control 1 Quart

from

$6.49
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 0W-20 Full Synthetic Motor Oil, Faster Oil Flow, 1 Quart (Part No.F900)

0W-20 Full Synthetic Motor Oil, Faster Oil Flow, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 0W-20 and is a fully licensed GM dexos1 Gen 2 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability, Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 0W-20 is formulated with high-quality synthetic base stocks and the latest additive technology to meet stringent API and ILSAC specifications, ensuring top-tier protection for your engine.
  • Advanced LSPI Prevention: Specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, reducing the risk of premature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, offering broad application across various engine types.
  • GM dexos1 Gen 2 Licensed: Fully licensed as GM dexos1 Gen 2 motor oil, ensuring it meets the high standards required for modern engines, including those from General Motors.
See More

FRAM – 0W-20 High Mileage Full Synthetic Motor Oil: 1 Quart (Part No.F913)

0W-20 High Mileage Full Synthetic Motor Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

FRAM – Full Synthetic High Mileage 5W-20 Motor Oil: 1 Quart (Part No.F923)

Full Synthetic High Mileage 5W-20 Motor Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Protection for Advanced Engine Designs: Specifically designed for gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, providing increased protection and preventing low-speed pre-ignition (LSPI) which can lead to premature engine failure.
  • Increased Wear Protection and Stability: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, ensuring long-lasting engine performance and reliability.
See More

Most Popular 2014 Jaguar XJR Greases

Customize your Jaguar with 2 Greases products like Multi-Purpose Greases, all priced under $59.99.

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon

from

$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart

from

$18.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:
  • FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Top-Rated Oil and Lubricants Brands For Your 2014 Jaguar XJR

Shop for the best-rated brands offering Oil and Lubricants and other products for your 2014 Jaguar XJRs. Below you’ll find some of our best rated Oil and Lubricants from Valvoline, and more. Oil and Lubricants from these brands that fit a 2014 XJR start at just $18.99 and are rated as high as 5 stars. OEM and aftermarket Oil and Lubricants don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2014 Jaguar XJR Oil and Lubricants

When it comes to maintaining or upgrading your 2014 Jaguar XJR, using quality Oil and Lubricants is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Oil and Lubricants, specifically designed for the 2014 Jaguar XJR. With over 2 Valvoline brand Oil and Lubricants in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.99, with an average price of just $39.49. Plus, with over 364 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Oil and Lubricants will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

FAQs for 2014 Jaguar XJR Oil and Lubricants

Which Oil and Lubricants are best-sellers for 2014 Jaguar XJRs?

Out of 12 Oil and Lubricants that fit 2014 Jaguar XJRs, the following parts are the top sellers:

What’s the price range for 2014 Jaguar XJR Oil and Lubricants?

Oil and Lubricant prices for the 2014 Jaguar XJR start at $6.49 and go up to $59.99 for the most premium parts.

What’s the average price of a Oil and Lubricant for a 2014 Jaguar XJR?

The average price for Oil and Lubricants for the 2014 Jaguar XJR is $21.37. Keep in mind the variety of part types within our Oil and Lubricant category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Oil and Lubricants for other Jaguar XJR model years?

Yes, we currently carry Oil and Lubricants for 18 model years of Jaguar XJRs between 1995 and 2017. Oil and Lubricants are bought most frequently for the following model years: 2017, 2016, 2015, 2009, 2008, 2007, 2006, 2005, and 2004.

What are the cheapest Oil and Lubricants for my 2014 Jaguar XJR?

What are the top-rated Oil and Lubricants that fit the 2014 Jaguar XJR?

Out of 728 reviews by customers, our 2014 Jaguar XJR Oil and Lubricants have an average customer rating of . These are some of the highest-rated Oil and Lubricant types for the 2014 Jaguar XJR and their top-rated products:

What types of Oil and Lubricants do you sell for my 2014 Jaguar XJR?

As of 2/5/25, these are some of the most in-demand types of Oil and Lubricants for a 2014 Jaguar XJR:

Can I get help with 2014 Jaguar XJR Oil and Lubricant orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jaguar Oil and Lubricants and more.

What is your return policy for Jaguar XJR Oil and Lubricants?

Advance Auto Parts keeps returns simple. For new Jaguar XJR Oil and Lubricants and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.