2014 Hyundai Tucson Engine Timing Parts

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Product Features:

• Cloyes chains are pre-stressed and heat-treated.
• Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
• Sprockets are CAD designed, manufactured using premium material and heat-treated.
• Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
• Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain.
• All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
• Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing.
• CAD designed and manufactured using premium materials, guides use the latest in design and material technology ensuring quiet operation and durability.
• All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Backed by Limited Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium,quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides , respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry,leading warranty and technical support.

Product Features:

• Cloyes chains are pre,stressed and heat,treated.
• Engineered and manufactured with precision pitch control to ensure optimal chain,to,sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long,term durability.
• Sprockets are CAD designed, manufactured using premium material and heat,treated.
• Featuring precision,tooled tooth form, bore, off,set and timing index for superior fit, reliability, and long,term performance in engine timing repairs.
• Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain.
• All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
• Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing.
• CAD designed and manufactured using premium materials, guides use the latest in design and material technology ensuring quiet operation and durability.
• All timing components designed in the USA and manufactured using premium materials for OE,level fit and function, allowing for smooth installation and reliable performance.
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Backed by Limited Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

• Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
• Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience.
• Backed by Limited Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component.
• Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience.
• Backed by Limited Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The Variable Valve Timing (VVT) Solenoid manages valve lift timing & oil flow within specified engine rev speeds and loads. When VVT solenoids are running normal, engine performance and fuel efficiency is optimized in all RPM ranges. A failed VVT sensor will cause intake & exhaust valves to open/close during improper times, which results in major reduced fuel economy. HL Mando VVT solenoids are OE replacement parts, same as the one found on your vehicle. Go with HL Mando VVT Solenoids to bring your car’s fuel economy back to optimal – We Are OE!

Product Features:

• Direct Original Equipment Replacement
• Tested for Quality, Durability, and Reliability
• Manufactured in Korea

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:

• Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
• Durable construction – this part is made from quality materials to ensure a long service life
• Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
• Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
• The VVT solenoids meets the demands of today’s VVT engines at both low and high RPMs.
• The VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
• The VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
• The VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
• The VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
• The VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
• The VVT solenoids meets the demands of today’s VVT engines at both low and high RPMs.
• The VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
• The VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
• The VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
• The VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
• The VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
• The VVT solenoids meets the demands of today’s VVT engines at both low and high RPMs.
• The VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
• The VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
• The VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
• The VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
• The VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.

Product Features:

• Guaranteed fitment
• High-strength materials withstand engine heat and vibration
• Manufactured to OE dimensions for proper clearances and alignment
• Matches OE specifications for proper timing at all engine speeds