from

$322.18

Alternator

from

$579.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

from

$251.99

Bosch has been a major supplier of new alternators to Original Equipment vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators. Bosch Premium Alternators are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions.

Product Features:

Full-load tested to guarantee compliance with Bosch’s strict performance specifications
100% factory tested, units are remanufactured (not rebuilt)
Built to last – uses high quality materials and the most technologically advanced developments.

from

$276.12

DENSO alternators are not only original equipment on many of the world’s top production cars; they are a favorite in motorsports as well, where their light weight, high efficiency, and durability under the most gruelling conditions make them the natural choice. Remanufactured DENSO alternators go through a gruelling process: Stators and rectifiers are tested to 300 volts, while rotors are submitted to 600 volts, all to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-standard lubricants. New or remanufactured, a DENSO alternator is a quality component.

Product Features:

OE-Equivalent Direct Fit Application.
Remanufactured using only OE Components.
29 performance and safety checks.
Subjected to rigorous safety and performance tests.
Tested to OE standards and re-packed with OE-grade lubricant.
Provides exceptional reliability.

from

$405.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

from

$247.99

Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability

Product Features:

Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life

from

$205.99

Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
All new components are utilized to ensure long service life
Internal electronics are upgraded for heavy duty reliability (where applicable)
Armatures and commutators are 100% load tested
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-10531

from

$218.99

Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are prime

Product Features:

High quality components form the foundation our parts are built from. Transpo’s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
Integrated magnetic switch provides protection against weak power from batteries.
Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf

from

$197.99

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

from

$233.99

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
100% remanufactured drive clutch assembly ensures lasting performance
Armatures and commutators are 100% load tested
New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$5.29

This starter bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this starter bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$107.33

Dorman Ignition Lock Cylinders are part of the Ignition Lock Assembly and failure is due to wear and tear from continual key rotation. The purpose of the Ignition Lock Cylinder is to provide a level of security that requires a coded metal Ignition Key in order for the vehicle Ignition Switch to be operated and energized, thereby allowing the vehicle to be started and operated.

Product Features:

Direct replacement and operation
Includes easy to follow instructions with no need for any specialized tools or equipment
Tumblers are included for optional rekeying, eliminating the need to carry 2 keys and reprogram a new anti-theft key

from

$111.99

This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.

Product Features:

Direct replacement – this ignition lock cylinder is designed to match the fit and function of the original on specified GM vehicles
Restores function – engineered to ensure proper operation of the ignition key when the original cylinder is binding or has failed
Programming required – the included transponder keys will require programming with an appropriate scan tool
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$87.99

LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:

Every ignition lock cylinder is a direct-fit replacement cylinder that replaces damaged OE units ensuring an effective start of the engine energy supply
Manufactured with the highest grade materials for prolonged life and superior performance. This part is also a safety attribute because it does not accept any key which is not loaded with the appropriate R-code.
All of our ignition lock cylinders are carefully engineered following all OE specifications, in order to meet the service professionals’ needs and demands.
All of our ignition lock cylinders are 100% tested for proper fit, form and function