Name: Fuel Injector O-Ring Kit
Brand: Victor Reinz
SKU: 18-10027-01
Price: 8.79 USD

from

$8.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$2.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$6.29

GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$13.79

GM Genuine Parts Fuel Injector and Insulator Retainer Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$297.99

Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver’s disposal.

Product Features:

Reduces Throttle Response Time
Improves Acceleration
Easy To Install
Does Not Affect The Vehicles Electronic System

from

$297.99

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:

Reduces Throttle Response Time
Improves Acceleration
Easy To Install
Does Not Affect The Vehicles Electronic System

from

$182.99

GM Genuine Parts Fuel Injection Throttle Control Actuator Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules are electrically operated motor assemblies that control throttle plates. They receive an electrical signal from the engine control module and open throttle plates based on input from the accelerator pedal module. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$41.99

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$36.99

CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials.
Services four injectors.

from

$28.49

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$26.99

Product Features:

Premium OE quality materials

from

$20.89

Complete kit includes banjo bolt seals to reseal injector fuel return rail manifold on Duramax LB7 engines. One required per side.

Product Features:

Original equipment fit, form and function
Includes 4 fuel return rail banjo bolt seals
Includes 1 return fitting banjo bolt seal

from

$6.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications

from

$292.99

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$289.99

GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient air/fuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$429.99

GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient air/fuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$90.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$82.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Application-specific to ensure the proper fit and form
Precision-engineered pressure regulators for proper fuel delivery and engine performance
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$417.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our fuel pressure regulators are application specific for the perfect fit and form
A robust engineering design for greater resistance to leakage
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$95.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$73.99

CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:

Each unit is 100% tested to OE specifications.
Includes new o-rings and seals made of premium OE quality materials.
Includes application specific technical bulletin, where applicable.

from

$113.99

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$695.69

The ACDelco GM Original Equipment Fuel Injector is a GM-recommended replacement for your vehicle’s original component. The Fuel Injector is an electro-magnetic valve that meters fuel into the engine’s intake manifold or cylinders for combustion. The engine management computer operates the injector by applying an electric current to the injector solenoid winding – this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. This original equipment fuel injector has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Atomize fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$464.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$135.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van & pickup trucks.

Product Features:

Manufactured with the latest OE updates, so they can often be superior to the parts they replace
Manufactured using all OE tools and processes
Guaranteed to provide OE performance

from

$199.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
End of line testing using the exact OE test specifications.
Guaranteed to provide OE performance and meet all emission specifications.
Continuous improvement, remanufactured with the latest upgrades to components and specifications.