2014 Dodge Challenger Engine Cold Air Intakes

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

“7”” Tall “”Oil Free”” Air Filter: This intake system utilizes an oil free, 7″” tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance. High Quality Tube: This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet. Hassle-Free Installation: All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.”

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

“6”” Flange Massive Air Filter:This intake system utilizes a pre-oiled, 8″” tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.Dyno-Tuned Carbon Fiber Intake Tube:100% Lightweight, high gloss, clear-coated twill weave carbon fiber tube to achieve maximum power gains while maintaining a perfect fit.Aluminum Heat Shield:Lightweight aluminum powder-coated black One-piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation.Hassle-Free Installation:All clamps, reinforced coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.”

“6”” Flange Massive Air Filter: This intake system utilizes a pre-oiled, 7″” tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Dyno-Tuned Carbon Fiber Intake Tube: Lightweight, high gloss, clear-coated twill weave carbon fiber tube to achieve maximum power gains while maintaining a perfect fit. One-Piece Heat Shield: Lightweight aluminum Powder-coated black One-piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation. Hassle-Free Installation: All clamps, reinforced coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.”

“Unique One-Piece Housing W/ Sight Window: The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of cross-linked polyethylene red. It accommodates the “”Hellcat”” headlight air inlet for 2015 Dodge Challenger models only (Requires scoop P/N: 54-72203-S). Roto-mold Tube: This system uses a CAD designed, dyno-tuned, roto-molded red intake tube to achieve maximum power gains while maintaining a perfect fit. A billet aluminum fitting is mounted on the tube to provide a perfect connection for the temperature sensor. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive oval flange and is 9″” tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.”

“A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of red cross-linked polyethylene. It accommodates the “”Hellcat”” headlight air inlet for 2015-2023 Dodge Challenger models only (requires scoop p/n 54-72203-SR). This system uses a computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. An injection molded fitting is mounted on the tube to provide a perfect connection for the temperature sensor. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive oval flange and is 9″” tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.”

K&N , 50-2545. PERFORMANCE PARTS>PERFORMANCE FILTERS AND INTAKES>AIR INTAKES>AIR INTAKES from K&N

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air box replaces restrictive stock air box and ensures a consistent supply of cold fresh air; built-in ram scoop forces cold, outside air to filter. Precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

This K&N NextGen cold air intake system is engineered for Dodge Charger V8 5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 16.7% to your engine and provides an increase of 23.5 horsepower and 18.39 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

This K&N NextGen cold air intake system is engineered for Dodge Charger V6 3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 42.7% to your engine and provides an increase of 14.94 horsepower and 8.22 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air box replaces restrictive stock air box and ensures a consistent supply of cold fresh air; built-in ram scoop forces cold, outside air to filter. Precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Airaid Air Intake System, 350-318. PERFORMANCE PARTS>PERFORMANCE FILTERS AND INTAKES>AIR INTAKES>AIR INTAKES from Airaid