2014 Chevrolet Silverado 1500 Radiator Hoses

Essential 2014 Chevrolet Silverado 1500 Radiator Hoses

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21.75" Long, 1.50" Diameter (Part No.E72270)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21.75" Long, 1.50" Diameter

from

$99.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Modular Coolant Hose (Part No.24338)

Premium Modular Coolant Hose

from

$157.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Molded Radiator and Bypass Hose (Part No.G2000454640DAY)

Molded Radiator and Bypass Hose

from

$62.34
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.

Product Features:
  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
  • Limited Three Year Warranty
See More

Dayco – Dayco, Heater Hose (Part No.R30301220888DAY)

Dayco, Heater Hose

from

$54.38
Dayco, Heater Hose

ACDelco – Professional Molded Coolant Hose (Part No.G2000576697ACD)

Professional Molded Coolant Hose

from

$59.27
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles
See More

Gates – Premium Molded Coolant Hose (Part No.22436)

Premium Molded Coolant Hose

from

$28.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.22435)

Premium Molded Coolant Hose

from

$291.99
Dayco® combined the outstanding performance characteristics of the Dayco® Gold Label® Top Cog® Belt with the increased flexibility obtained through bottom-cog technology to make this the most flexible heavy duty v-belt available. This CARQUEST by Dayco®belt meets or exceeds SAE J636 and J637 specifications. This Gold Label® Top Cog® Belt is another CARQUEST by Dayco® product proudly made in the USA.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dorman – Heater Hose Assembly (Part No.R3030359108DOR)

Heater Hose Assembly

from

$62.53
Durably engineered to resist corrosion and leakage, Dorman’s HVAC Heater Hose limits the possibility of overheating and subsequent engine damage. Put your engine worries to rest by preserving proper coolant circulation.

Product Features:
  • Comes with clamps and fittings (where applicable)
  • Tough rubber and steel construction
  • Front and rear heating and cooling lines available (where applicable)
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Dayco – Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 29 1/2 Inch Length (Part No.86836)

Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 29 1/2 Inch Length

from

$33.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Premium Modular Coolant Hose (Part No.22438)

Premium Modular Coolant Hose

from

$68.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

ACDelco – Professional Molded Coolant Hose (Part No.G2000576767ACD)

Professional Molded Coolant Hose

from

$57.63
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles
See More

2014 Chevrolet Silverado 1500 Radiator Hoses

Maybe you’re in the middle of a full rebuild of that 2014 Chevrolet Silverado 1500. Maybe you just need a couple of Radiator Hoses. Either way, Advance Auto Parts has 1 different Radiator Hoses in our inventory priced around $157.99. That means you can find the exact parts or products you need to keep that 2014 Chevrolet Silverado 1500 running smoothly.

Radiator Hoses are only as good as their brand. We stock 1 different brands to make sure you have plenty of trusted parts to choose from for your 2014 Chevrolet Silverado 1500. Gates are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Radiator Hoses for your 2014 Chevrolet Silverado 1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Radiator Hoses to keep your 2014 Chevrolet Silverado 1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Radiator Hoses Brands To Make Your 2014 Chevrolet Silverado 1500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2014 Chevrolet Silverado 1500 demands trusted brand parts and products to keep it running. Many trusted brands of Radiator Hoses make up Advance Auto Parts’ inventory, and all are ready to help make your Silverado 1500 the best it can be. Be sure to browse some of our top Radiator Hoses brands and parts.