2014 Chevrolet Malibu Engine Parts

Name: Valve Cover Gasket
Brand: GM Genuine Parts
SKU: 10154775
Price: 36.49 USD

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 2014 Malibu. Advance Auto Parts has popular Malibu parts like Camshafts, Engine Gaskets and Seals, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other Malibu model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2014 Chevrolet Malibu Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2014 Chevrolet Malibu Engine Parts Categories

Valve Covers

Engine Variable Timing Solenoids

Engine Oil Temperature Senders

Valve Cover Gaskets

Engine Timing Chain Kits

Turbochargers and Parts

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Cylinder Head Bolt Sets

Engine Oil Dip Stick Tube O-Rings

Crankshaft Position Sensors

Balance Shaft Chain and Kits

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Balance Shaft Kits

Timing Cam Gears

Engine Mounts

Timing Chain Guide Bolts

Oil Pans

Computer Control Relays

Engine Oil Dip Stick Tubes

Cylinder Head Gaskets

Turbocharger Wastegate Solenoids

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Timing Chain Tensioners

Intercoolers

Engine Computers

O-Rings

Engine Variable Timing Adjusters

Main Bearing Repair Sleeves

Balance Shaft Chain Tensioners

Engine Variable Timing Oil Control Valves

Engine Valve Stem Seals

Oversized Main Bearings

Standard Rod Bearing Sets

Oil Pump Kits

Standard Piston Rings

Lower Gasket Sets

Timing Chains

Camshaft Seals

Balance Shaft Sprockets

Timing Chain Guides

Timing Crank Gears

Fuel Pump Gaskets

Balance Shaft Chain Guides

Fuel Tank Sending Unit Gaskets

Remanufactured Engines

Cylinder Heads

Engine Timing Chain Kit with Water Pump

Engine Oil Pump Primers

Engine Assembly Lube

Camshaft Lubes

Engine Valve Cover O-Rings

Engine Timing Sprocket Bolt

Essential Engine Parts for 2014 Chevrolet Malibus

from

$36.49

GM Genuine Parts Engine Valve Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$99.99

This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$238.99

GM Genuine Parts Turbocharger Wastegate Solenoids are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$0.99

Engine Oil Dipstick Tube O-Ring

from

$37.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$43.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$24.99

Street Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. Seamless 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life. USA Made.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$58.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$59.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Manufactured to fit a specific application
Ensures that oil is evenly distributed in the engine system
Each oil pump is tested for pressure and flow under conditions designed to duplicate actual engine operating conditions before leaving plant
Every pump is engineered, manufactured and assembled to the highest material and production standards
Utilizes ISO & QS certified manufacturing
High volume, check pan for clearance; 5/8″ inlet; use shaft w/steel guide

from

$83.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$31.49

Fixing a sheared engine timing chain guide bolt with original equipment typically requires a labor-intensive removal procedure. This Dorman OE FIX innovation saves hours by integrating the bolt and plug for an easy repair on GM Ecotec engines.

Product Features:

Innovative fix – this engine timing chain guide bolt allows for simple replacement of a sheared original bolt
Saves hours – reduces repair time dramatically by eliminating need for head removal, drilling and tapping
Integrated design – plug and bolt combined as one piece to easily restore functionality
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$41.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$34.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$31.99

This engine oil dipstick tube is designed to match the fit and function of the original tube on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine oil dipstick tube is designed to match the fit and function of the original tube on specified vehicles
Restores functionality – reliable replacement for an original part that is missing, bent or broken
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$668.99

Engineered with precision, Rotomaster New Turbochargers stand apart in the aftermarket industry. Designed for today’s demanding engines, each unit is 100% new and undergoes rigorous triple balancing and quality validation to meet or exceed original equipment performance. Drive with confidence knowing quality and dependability come standard with every turbocharger. As experts in turbochargers, Rotomaster offers best-in-class knowledge and support. Their on-call technical support team is ready to help with installation, troubleshooting, and diagnostics so you can stay up and running with confidence. Backed by an industry-leading warranty, Rotomaster turbochargers deliver confidence and coverage you can count on.

Product Features:

Precision Dynamic Balancing: Compressor wheels, turbine shafts, and rotating assemblies are 100% dynamically balanced. Delivers smoother operation and longer turbo life.
All-New Construction: Built entirely from new components, with no remanufactured parts. Ensures consistent, trouble-free performance.
OE-Matching Fit and Performance: Engineered to meet or exceed original equipment standards. Guarantees a direct replacement that installs easily and performs like the factory unit, no guesswork required
Pre-Lubed for Protection: Includes a pre-lube syringe to prep the turbo before first startup. Minimizes installation risk by preventing dry starts, giving you peace of mind.
Complete Installation Kit: Comes with essential gaskets and mounting hardware. Saves time and ensures a smooth install with no last-minute parts runs.

from

$109.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$52.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$71.99

Made In USA. Melling Engine Oil Priming Tools were developed as a way for engine builders to safely pre-prime the engine with oil prior to the initial engine startup. The Priming tool, with the use of a standard drill circulates oil to all of the critical areas of the new engine quickly and safely.

Product Features:

Priming tool circulates oil through critical areas of a new engine before engine start up
Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$67.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$73.99

ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Coated to help protect against premature corrosion
Designed to match OEM calibration to provide the performance you expect from GM
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$15.99

GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$3798.99

Your remanufactured engine is tested in several specific ways after being assembled; Multiple Pressure tests. Each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressure

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your First !
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$10.49

Sealed Power parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Formulated for pre-lubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$64.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A balance shaft chain tensioner maintains appropriate tension on the balance shaft chain. Depending on design and application, Cloyes engine balance shaft chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component.
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$39.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine’s timing system, the crankshaft sprockets work in unison with the timing chain, tensioners, guides and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision-tooled with exact tooth geometry and a perfectly matched bore, off-set and timing index for superior fit, reliability, and long-term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service.

Product Features:

Features precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs
CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$658.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$51.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Upgrade your 2014 Chevrolet Malibu with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2014 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 171 Engine Parts for the 2014 Chevrolet Malibu, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2014 Chevrolet Malibu at great prices. Our Engine Parts inventory for this model ranges from just $0.99 to $4,732.00, with an average price of $165.90. Our 171 Engine Parts in stock come from 26 trusted brands, so you’re sure to find the right part for your 2014 Chevrolet Malibu without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Chevrolet Malibu, we stock popular OEM and aftermarket Engine Parts from top names like ACDelco, Felpro, Dorman, and more. ACDelco Engine Parts start at just $73.99 and boast an impressive 4.7 stars average rating from customers. Felpro and Dorman also bring quality to the table, with Engine Parts available starting at $7.99, and at an average 4.6 stars rating. With 249 customer reviews and counting, our 2014 Chevrolet Malibu Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place. Start shopping confidently below for your 2014 Chevrolet Malibu!

Best-Selling Camshafts for 2014 Chevrolet Malibus

Enhance the driving experience in your Chevrolet with 13 quality Camshaft components, starting at $6.99.

show more show less

from

$64.99

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$59.99

Carquest camshaft position sensors are designed to meet original equipment (O.E.) fit, form and function and are built to ensure reliable performance at a great price. Each camshaft position sensor is 100% tested to ensure proper performance and a trouble-free installation. Carquest camshaft position sensors are a cost-effective solution for your engine management repair. Carquest camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
100% tested for proper performance
O-rings and seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$69.99

ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Helps keep engine timing and fuel injection running in sync
Helps provide proper alignment, positioning, and spacing for easy installation
Synchronizes engine valves and pistons for excellent engine performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$59.99

Helps keep engine timing and fuel injection running in sync
Helps provide proper alignment, positioning, and spacing for easy installation
Synchronizes engine valves and pistons for excellent engine performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$74.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our camshaft position sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application
O-rings and seals are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$38.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$73.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$74.99

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$34.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$31.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$37.99

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$11.29

GM Genuine Parts Engine Camshaft Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

Most Popular 2014 Chevrolet Malibu Engine Gaskets and Seals

Customize your Chevrolet with 15 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Timing Cover Gasket Sets, all priced under $81.99.

show more show less

from

$47.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$52.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$81.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$26.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$15.99

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$67.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$15.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$65.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications
Zero engine leakage for late model vehicles.

from

$62.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$49.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$46.99

Mr. Gasket Transmission Oil Pan Gaskets offer simple, no silicone installation. They use an aluminum carrier, silicone elastomer beading and a rubber coated binder to create a strong, long lasting seal perfect for the demands of high fluid temperatures created in transmissions. Whether you are sitting in heavy traffic, racing, off-roading or just want a clean garage floor, these premium transmission pan gaskets from Mr. Gasket have you covered.

Product Features:

Requires no silicone for simple installation
Excellent torque retention to prevent possible leaks caused from loosened bolts
Aluminum carrier provides un-matched gasket strength, fit and durability
Silicone elastomer beading provides a positive seal under severe temperatures and conditions
Rubber coated sealing binder adds a third layer of protection and aids in the gaskets ability to seal even with small imperfections of mating surfaces

from

$39.49

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

from

$36.99

GM Genuine Parts Engine Timing Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$9.99

Product Features:

Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
Insignificant shrinkage and loss of mass even in high-heat environments
Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
Sealing gap 0.006 in (0.15 mm)

from

$6.99

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

Top Picks for 2014 Chevrolet Malibu Valve Cover and Cylinder Heads

Upgrade Chevrolet Malibus with top-quality Valve Cover and Cylinder Heads parts, including 13 OEM and aftermarket selections for your 2014 model.

show more show less

from

$114.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$767.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$52.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$165.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$918.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$868.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$735.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$342.99

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$222.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$118.99

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.

Product Features:

Guaranteed fitment
Cracked valve covers can create troublesome vacuum leaks and allow leaking oil to damage engine components
URO Parts’ replacement valve covers are precisely manufactured to OE dimensions for easy installation and maximum protection of valvetrain
Durable high-quality metal or plastic material is corrosion-resistant and withstands oil vapor and intense engine heat

from

$76.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$67.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

In-Demand Engine Mounts for 2014 Chevrolet Malibus

Select from 1 premium Engine Mounts parts for your 2014 Chevrolet Malibu.

show more show less

from

$134.99

Anchor 3393 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2013-2019
Weight approx: 4 Lbs
Hydraulic

Most Sold 2014 Chevrolet Malibu Engine Timing Parts

Explore our best-selling Chevrolet parts for the 2014 Malibu among 70 OEM and aftermarket options starting from $7.99.

show more show less

from

$77.99

Coated to help protect against premature corrosion
Designed to match OEM calibration to provide the performance you expect from GM
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$73.99

Coated to help protect against premature corrosion
Designed to match OEM calibration to provide the performance you expect from GM
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$75.99

Coated to help protect against premature corrosion
Designed to match OEM calibration to provide the performance you expect from GM
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$31.49

Innovative fix – this engine timing chain guide bolt allows for simple replacement of a sheared original bolt
Saves hours – reduces repair time dramatically by eliminating need for head removal, drilling and tapping
Integrated design – plug and bolt combined as one piece to easily restore functionality
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$124.99

The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Product Features:

Direct replacement – this VVT sprocket fits and performs like the original sprocket
Durable construction – made from durable steel and precision machined for reliable performance
100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$54.99

This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:

Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
Durable construction – this part is made from quality materials to ensure a long service life
Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$70.99

Coated to help protect against premature corrosion
Designed to match OEM calibration to provide the performance you expect from GM
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$52.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$52.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$7.99

This VVT sprocket bolt is designed to match the fit and function of the original part on specified vehicles for a proper repair of the variable valve timing system. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this VVT sprocket bolt matches the fit and function of the factory part on specified years, make and models
Ideal solution – this VVT sprocket bolt is a reliable replacement for an original part that has become stripped or broken during repair
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$187.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing. CAD designed and manufactured using premium materials,
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$49.99

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$172.99

Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$32.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Refer to our online catalog for detailed application-specific information

from

$451.99

Built on award-winning innovation, Cloyes Variable Valve Timing (VVT) kits deliver precision, performance, and a complete repair. Cloyes, a leader in timing systems since 1921, provides technicians with superior repair solutions. Our award-winning VVT Kits, including camshaft phasers (sprockets), solenoids and timing components, are engineered for precision, durability, and optimal engine performance. Cloyes VVT Kits offer complete repair solution with all necessary components included for an easy install. Made with premium-grade materials to ensure durability and longevity. Each part is production tested to ensure quality fit, function, and performance. Engineered for precise fitment, seamless operation, and easy installation and backed by Cloyes commitment to quality and reliability. SET INCLUDES: 9-5467 Engine Timing Gear Oiler (1 EA), VTS107 Engine Variable Valve Timing (VVT) Solenoid (1 EA), 9-4201 Engine Timing Chain (1 EA), 9-5375 Engine Timing Chain Tensioner Guide (1 EA), 9-5381 Engine Timing Chain Guide (1 EA), 9-5382 Engine Timing Chain Guide (1 EA), 9-5481 Engine Timing Chain Tensioner (1 EA), S849 Engine Timing Crankshaft Sprocket (1 EA), VC107 Engine Variable Valve Timing (VVT) Sprocket (2 EA), VTS106 Engine Variable Valve Timing (VVT) Solenoid (1 EA).

Product Features:

OE-Quality: Manufactured using premium-grade materials to meet or exceed OE specifications ensuring durability and long-lasting performance.
Production Tested for individual part performance and system fit, reducing the risk of installation issues or comebacks
Complete Repair Kits: Includes gaskets, o-rings, and any necessary fasteners needed for a full, professional repair, reducing the risk of comebacks.
Backed by Limited Warranty and century-long reputation offering unmatched repair confidence in every component.
Refer to our online catalog for detailed application-specific information

from

$22.99

CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Refer to our online catalog for detailed application-specific information

from

$51.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$56.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$44.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$144.99

Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$62.99

ACDelco GM Original Equipment Engine Timing Chain Tensioners help maintain a consistent amount of tension within the timing chain to help reduce the effect that slack has on the valve timing of the engine, and are GM-recommended replacements for your vehicle’s original components. These original equipment tensioners have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Provides consistent tension to help keep engine running in proper time
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$32.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain tensioner guide serves as a guide (or track) for the timing chain and applies tension to the system, connecting crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability and that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$239.99

This rigorously tested VVT oil control valve matches the fit and function of the original equipment on specific Chevrolet Impala and Malibu sedans, with additional enhanced features to improve performance and reliability.

Product Features:

Upgraded replacement – this VVT oil control valve directly replaces the factory part on specific vehicles, with additional enhancements for future reliability
Improved design – increased solenoid force to improve activation/deactivation
Extensively tested – validated through vibration, thermal, and long-term on-vehicle testing
Better installation – improved internal poppet valve assembly to ensure proper fitment, with premium gasket and hardware included

from

$37.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Top-Rated Engine Parts Brands For Your 2014 Chevrolet Malibu

Shop for the best-rated brands offering Engine Parts and other products for your 2014 Chevrolet Malibus. Below you’ll find some of our best rated Engine Parts from ACDelco, Felpro, and Dorman, and more. Engine Parts from these brands that fit a 2014 Malibu start at just $7.99 and are rated as high as 4.7 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular ACDelco 2014 Chevrolet Malibu Engine Parts

When it comes to maintaining or upgrading your 2014 Chevrolet Malibu, using quality Engine Parts is essential to ensure durability and a perfect fit. ACDelco ticks all of those boxes. We offer a wide selection of ACDelco Engine Parts, specifically designed for the 2014 Chevrolet Malibu. With over 3 ACDelco brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $73.99, with an average price of just $75.99. Plus, with over 4 customer reviews and an average rating of 4.7 stars, you can trust that our ACDelco Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $75.99

(1)

Exhaust Variable Valve Timing (VVT) Solenoid

“Replaced both the intake and exhaust solenoid after these codes popped up and it fixed the codes. Extremely easy replacement. Easy as spark plugs!”

from $77.99

(2)

Exhaust Variable Valve Timing (VVT) Solenoid with Seal, Retainer, and Bolt

“For the price and being a AC Delco part, it sure did the job. It is easy to install. The engine light has not come on since installed three months ago”

from $73.99

(1)

Intake Variable Valve Timing (VVT) Solenoid

“Replaced both the intake and exhaust solenoid after these codes popped up and it fixed the codes. Extremely easy replacement. Easy as spark plugs!”

Popular Felpro 2014 Chevrolet Malibu Engine Parts

Felpro auto parts is one of the highest quality Engine Part brands in the market. Any 2014 Chevrolet Malibu owner should feel confident when installing genuine Felpro parts in their vehicle. To ensure the best fit and performance for your 2014 Malibu, Advance Auto Parts carries a full inventory of 3 Felpro Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Felpro Engine Parts range from $8.49 to $47.99, plus, with more than 129 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $47.99

(10)

Engine Timing Cover Gasket Set

“great to install so simple”

from $26.99

(10)

Engine Crankshaft Seal

“I got rushed halfway through the first install and I botched it. 2nd time around and good to go. The packaging was perfect and showed that the method ”

from $8.49

(109)

Fuel Injector O-Ring Kit

“Good parts”

FAQs for 2014 Chevrolet Malibu Engine Parts

Which Engine Parts are best-sellers for 2014 Chevrolet Malibus?

Out of 171 Engine Parts that fit 2014 Chevrolet Malibus, the following parts are the top sellers:

Intake Variable Valve Timing (VVT) Solenoid with Seal, Retainer, and Bolt (11735736) – $70.99
Engine Variable Valve Timing (VVT) Solenoid (12446595) – $52.99
Harmonic Balancer Bolt (10859178) – $7.99

What’s the price range for 2014 Chevrolet Malibu Engine Parts?

Engine Part prices for the 2014 Chevrolet Malibu start at $0.99 and go up to $4,732.00 for the most premium parts.

What’s the average price of a Engine Part for a 2014 Chevrolet Malibu?

The average price for Engine Parts for the 2014 Chevrolet Malibu is $165.90. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Malibu model years?

Yes, we currently carry Engine Parts for 42 model years of Chevrolet Malibus between 1964 and 2025. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Engine Parts for my 2014 Chevrolet Malibu?

The cheapest 2014 Chevrolet Malibu Engine Parts we carry in stock are:

Engine Oil Dipstick Tube O-Ring (50251306) – $0.99
Engine Oil Filler Cap Seal (12005635) – $5.99
Inner Valve Cover Gasket (12518486) – $6.99
Stock Replacement Engine Assembly Lubricant, 4 oz. (50175373) – $6.99
Harmonic Balancer Bolt (10859178) – $7.99

What are the top-rated Engine Parts that fit the 2014 Chevrolet Malibu?

Out of 249 reviews by customers, our 2014 Chevrolet Malibu Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2014 Chevrolet Malibu and their top-rated products:

Engine Gaskets and Seals
- Engine Timing Cover Gasket Set (10068209) – $47.99
- Engine Valve Cover Gasket Set (10901071) – $52.99
- Engine Valve Cover Gasket Set (10935274) – $81.99
Valve Cover and Cylinder Heads
- Engine Timing Cover Gasket Set (10068209) – $47.99
- Engine Valve Cover Gasket Set (10901071) – $52.99
- Engine Valve Cover Gasket Set (10935274) – $81.99

What types of Engine Parts do you sell for my 2014 Chevrolet Malibu?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 2014 Chevrolet Malibu:

Can I get help with 2014 Chevrolet Malibu Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Malibu Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2014 Chevrolet Malibu Engine Parts

GM Genuine Parts – Valve Cover Gasket (Part No.10154775)

Dorman – Engine Oil Pan: Direct Fit, Steel, Sump (Part No.264-103)

GM Genuine Parts – Turbocharger Wastegate Solenoid (Part No.12649146)

Felpro – Engine Oil Dipstick Tube O-Ring (Part No.73889)

Cloyes Gear – Engine Balance Shaft Sprocket (Part No.S855)

Felpro – Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (Part No.OS 5197 C-2)

Cloyes Performance – High Performance Timing Chain (Part No.9-147)

Carquest Premium – Crankshaft Sensor (Part No.CSC1255)

Sealed Power – Engine Oil Pump (Part No.224-4143)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5536)

Dorman – Timing Chain Guide Bolt (OE Fix) (Part No.917-954)

Carquest Premium – Multi-Use Connector (Part No.PTA1205)

National – Shaft Repair Sleeve (Part No.99166)

Dorman – Help – Engine Oil Dipstick Tube: Direct Replacement, Mild Steel (Part No.917-485)

Rotomaster – Rotomaster (Part No.M1040106N)

PowerBond – Street Performance Harmonic Balancer; 154.5mm Diameter (Part No.PB1012ST)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26377 PT)

Melling – Engine Oil Priming Tool (Part No.PT13)

Felpro – Engine Conversion Gasket Set (Part No.CS 26223-1)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

ACDelco – Intake Variable Valve Timing (VVT) Solenoid (Part No.12662736)

GM Genuine Parts – Fuel Pump O-Ring (Part No.G41)

Spartan – Engine Long Block; Chevrolet 3.5L 04-06 Engine (Part No.DCVE)

Sealed Power – Engine Assembly Lubricant (Part No.55-400)

Cloyes Gear – Engine Balance Shaft Chain Tensioner (Part No.9-5383)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S849)

Spartan – Engine Cylinder Head; Chevrolet 2.2 02-05 ECOTEC Head (Part No.2CEC)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1737)

Carquest Premium – Camshaft Sensor (Part No.CSC1032)

Carquest – Camshaft Position Sensor (Part No.35C1006)

GM Genuine Parts – Engine Camshaft Position Sensor (Part No.12674704)

GM Genuine Parts – Engine Camshaft Position Sensor (Part No.12638266)

Carquest Premium – Camshaft Position Sensor (Part No.CSC1194)

Carquest Premium – Multi-Use Connector (Part No.PTA1125)

NTK – Engine Camshaft Position Sensor (Part No.EC0217)

NTK – Engine Camshaft Position Sensor (Part No.EC0323)

National – Shaft Repair Sleeve (Part No.99166)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2647)

Dorman – Magnetic Camshaft Position Sensor (Part No.962-055)

GM Genuine Parts – Camshaft Sprocket O-Ring (Part No.12574477)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 46079)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50778 R)

MAHLE Original – Engine Valve Cover Gasket Set (Part No.VS50641)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71198)

GM Genuine Parts – Fuel Pump O-Ring (Part No.G41)

Felpro – Engine Conversion Gasket Set (Part No.CS 26223-1)

Felpro – Fuel Pump Mounting Gasket Set (Part No.ES 73194)

Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, 2 Pieces (Part No.15-10415-01)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72942-1)

Victor Reinz – Engine Valve Cover Gasket (Part No.15-11037-01)

Mr. Gasket – Transmission Pan Gasket (Part No.51G07MRG)

MAHLE Original – Engine Valve Cover Gasket Set (Part No.VS50752)

GM Genuine Parts – Timing Cover Gasket (Part No.24435052)

Victor Reinz – RTV Silicone (Part No.70-31414-10)

GM Genuine Parts – Inner Valve Cover Gasket (Part No.12627105)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72196)

Spartan – Engine Cylinder Head; Chevrolet 2.4 11-13 Cyl Head (Part No.2CEW)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26517 PT)

Felpro – Engine Oil Filler Cap Seal (Part No.73193)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26517 PT)

Spartan – Engine Cylinder Head; Chevrolet 2.5 14-15 GDI Head (Part No.2CEV)

Spartan – Engine Cylinder Head; Chevrolet 2.0 13-15 LTG Head (Part No.2CAD)

Spartan – Engine Cylinder Head; Chevrolet 2.5 GDI CAL Head (Part No.2CEN)

Victor Reinz – Engine Cylinder Head Gasket Set (Part No.02-10209-01)

Dorman – Valve Covers: with Gaskets, Direct Replacement, Cast Aluminum (Part No.264-904)

Autotecnica – Engine Valve Cover w/ Gasket, Includes gasket (Part No.GM1416782)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-10528-00)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 73378)

Anchor – Engine Mount: Right, 1 Piece (Part No.3393)

ACDelco – Exhaust Variable Valve Timing (VVT) Solenoid with Seal, Retainer, and Bolt (Part No.12679100)

ACDelco – Intake Variable Valve Timing (VVT) Solenoid (Part No.12662736)

ACDelco – Exhaust Variable Valve Timing (VVT) Solenoid (Part No.12662737)

Dorman – Timing Chain Guide Bolt (OE Fix) (Part No.917-954)

Dorman – Camshaft Phaser (Part No.917-254)

Dorman – Variable Valve Timing Solenoid (Part No.917-216)

GM Genuine Parts – Intake Variable Valve Timing (VVT) Solenoid with Seal, Retainer, and Bolt (Part No.12679099)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1001)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1002)