2014 Chevrolet Caprice Valve Cover and Cylinder Heads

Essential 2014 Chevrolet Caprice Valve Cover and Cylinder Heads

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72390)

CYLINDER HEAD BOLT SET

from

$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72856)

Engine Cylinder Head Bolt Set

from

$31.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72233)

Engine Valve Cover Grommet Set

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Dorman – Cylinder Deactivation Manifold (Part No.917-162)

Cylinder Deactivation Manifold

from

$228.99
The CD Manifold manages the cylinder deactivation function for optimized fuel economy and engine efficiency. This direct replacement part restores drivability and proper engine performance.

Product Features:
  • Cylinder Deactivation Manifold
  • Cylinder Deactivation Manifold
  • The CD Manifold manages the cylinder deactivation function for optimized fuel economy and engine efficiency. This direct replacement part restores drivability and proper engine performance.
  • Constructed of aluminum for increased durability and a longer service life
  • No special tools required
See More

Dorman – Cylinder Deactivation Manifold (Part No.917-162XD)

Cylinder Deactivation Manifold

from

$326.99
This engine valve lifter oil manifold matches the fit and function of the original oil distribution and solenoid assembly and is designed to help restore the proper operation of the cylinder deactivation system on specified vehicles.

Product Features:
  • Upgraded design – this cylinder deactivation manifold has enhanced features to match the fit, function and performance of the factory part on certain vehicles.
  • Improved seals – increased sealing surface interface, redesigned rod sub-assembly, and superior quality O-rings and gasket.
  • Reliable operation – internal bore step incorporates a radius edge to prevent valve sticking
  • Durable construction – solenoid rod hardened to improve wear resistance and maintain tighter tolerances
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 8510 PT)

Cylinder Head Gasket Set

from

$84.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
  • Application specific design to ensure a perfect fit and premium seal
  • Premium quality parts you can trust
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 8510 PT-4)

Cylinder Head Gasket Set

from

$91.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Mr. Gasket – Mls Head Gasket (Part No.3130G)

Mls Head Gasket

from

$111.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:
  • Gasket bore – 4.060″ Thickness – .040″
  • Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
  • Optimized sealing embossments seals extreme cylinder pressure
  • Provides excellent stability and reduces cylinder bore distortion.
  • Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
  • Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
  • For high-performance street, drag race and oval track use
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8510 PT)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8651 PT)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$52.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
See More

Edelbrock – Classic Series Valve Covers: Big Block Chevy 396-502 1965 & Up, Black Aluminum (Part No.41853)

Classic Series Valve Covers: Big Block Chevy 396-502 1965 & Up, Black Aluminum

from

$391.99
The Edelbrock part #41853 Classic Series Valve Covers are designed for Chevy Big-Block V8 1965 & Later applications and have a Black finish. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Product Features:
  • Big Block Chevy 396-502 1965 & Up
  • Tall
  • Black Aluminum
  • Set Of Two
See More

Mr. Gasket – Valve Cover (Part No.9801)

Valve Cover

from

$75.99
Chrome plated steel valve covers have a flat smooth top.

Product Features:
  • Fits 1960-1986 Chevy small block with perimeter bolt valve covers
  • Tall-style covers provide extra clearance
  • Chrome plated steel construction
  • Sold as a pair
  • Cadmium Plated To Resist Corrosion
  • Easy Installation
See More

Dorman – Valve Covers: With Gasket, Direct Replacement, Aluminum, Driver Side (Part No.264-969)

Valve Covers: With Gasket, Direct Replacement, Aluminum, Driver Side

from

$92.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:
  • Direct replacement – this valve cover matches the original equipment part for fit and function.
  • Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking.
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
See More

Felpro – O-RING (Part No.73193)

O-RING

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

ACDelco – Active Fuel Management Valve Lifter (Part No.12645725)

Active Fuel Management Valve Lifter

from

$76.99
ACDelco GM Original Equipment Engine Valve Lifters automatically help maintain a ‘zero’ valve lash condition to help prevent valve train noise and unnecessary valve train component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment valve lifters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Adjusts the valves on your vehicle’s engine for proper performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Edelbrock – Hydraulic Roller Lifter Kit for 1987 and Later S/B Chevrolet. (Part No.97386)

Hydraulic Roller Lifter Kit for 1987 and Later S/B Chevrolet.

from

$144.99
Edelbrock part #97386 lifter installation kit provides the necessary components to install replacement hydraulic roller lifters in a 1987 and later S/B Chevrolet. Includes original-spec lifter guides and hold down spider.

Product Features:
  • Lifter Installation Kit
  • 8 Lifter Guides
  • With Hold Down Bolts
  • Steel Material
  • Includes Hold Down Spider
See More

Sealed Power – Engine Valve Lifter (Part No.HT-969B)

Engine Valve Lifter

from

$5.29
Engine Valve Lifter

ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020409594ACD)

GM Original Equipment Engine Coolant Temperature Sensor

from

$63.79
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Mahle – Cyl. Head Bolt Set (Part No.A3031653505MAH)

Cyl. Head Bolt Set

from

$78.67
Cyl. Head Bolt Set

Edelbrock – RPM Small-Block Chevy Straight Spark Plug 70cc Hydraulic Roller Cam (Part No.60735)

RPM Small-Block Chevy Straight Spark Plug 70cc Hydraulic Roller Cam

from

$1024.99
The Edelbrock #60735 Performer RPM cylinder head is designed for 1955-86 Small-Block Chevy applications. The Edelbrock #60735 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performa

Product Features:
  • Complete Single For Mechanical Flat Tappet
  • 70cc Combustion Chamber Volume
  • 195cc Intake/65cc Exhaust Runner Volume
  • 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
  • 0.562 in. Deck Thickness
See More

Spartan – Engine Cylinder Head; Chev 4.3/262 92-94 Cyl Head (Part No.2CC4)

Engine Cylinder Head; Chev 4.3/262 92-94 Cyl Head

from

$430.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Chev 350 68-79 Cyl Head (Part No.2C17)

Engine Cylinder Head; Chev 350 68-79 Cyl Head

from

$366.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Chev 350 69-85 Cyl Head (Part No.2C13)

Engine Cylinder Head; Chev 350 69-85 Cyl Head

from

$341.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Edelbrock – Small-Block Chevy E-Street Cylinder Heads 64cc (Part No.5089)

Small-Block Chevy E-Street Cylinder Heads 64cc

from

$1229.99
The Edelbrock #5089 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and

Product Features:
  • Complete Pair For Hydraulic Flat Tappet
  • 64cc Combustion Chamber Volume
  • 2.02cc Intake/60cc Exhaust Runner Volume
  • 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
  • 0.562 in. Deck Thickness
See More

Edelbrock – E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam (Part No.60989)

E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam

from

$891.99
Product Features:
  • 64cc combustion chamber with 200cc intake runner
  • 2.02 in. intake and 1.60 in. exhaust valves
  • Flat Tappet Camshaft Type
  • Exhaust And Intake 45 Degree Seat Angle
  • Sold as one complete head
See More

Spartan – Engine Cylinder Head; Chev 454 75-91 Cyl Head (Part No.2C44)

Engine Cylinder Head; Chev 454 75-91 Cyl Head

from

$432.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60739)

RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam

from

$990.99
Product Features:
  • Out-of-the-Box Bolt-On Performance
  • With Straight Plugs
  • 70cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More

Spartan – Engine Cylinder Head; Chev 350 87-95 Cyl Head (Part No.2CA2)

Engine Cylinder Head; Chev 350 87-95 Cyl Head

from

$397.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

2014 Chevrolet Caprice Valve Cover and Cylinder Heads

Maybe you’re in the middle of a full rebuild of that 2014 Chevrolet Caprice. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 36 different Valve Cover and Cylinder Heads in our inventory ranging from $4.49 to $672.99. That means you can find the exact parts or products you need to keep that 2014 Chevrolet Caprice running smoothly.

Valve Cover and Cylinder Heads are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2014 Chevrolet Caprice. Sealed Power, FELPRO, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2014 Chevrolet Caprice, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 65 reviews in this category, some of the top rated parts include Engine Cylinder Head Gasket with 5.0 stars and Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts with 5.0 stars.

So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2014 Chevrolet Caprice rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Valve Cover and Cylinder Heads Brands To Make Your 2014 Chevrolet Caprice Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2014 Chevrolet Caprice demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Caprice the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.

Top 2014 Chevrolet Caprice Valve Cover and Cylinder Heads from Sealed Power

Sealed Power products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 2014 Chevrolet Caprice. Popular Sealed Power parts include:
Engine Valve Lifter
from $12.99
(30)
Engine Valve Lifter
Engine Valve Lifters
Engine Valve Lifter
from $57.99
(4)
Engine Valve Lifter
Engine Valve Lifters

FAQs for 2014 Chevrolet Caprice Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the 2014 Chevrolet Caprice?

Out of 36 Valve Cover and Cylinder Heads for the 2014 Chevrolet Caprice, the most popular in our inventory are:
CYLINDER HEAD BOLT SET
from $36.99
(12)
CYLINDER HEAD BOLT SET
Cylinder Head Bolt Sets
Engine Valve Lifter
from $24.79
This product is not rated
Engine Valve Lifter
Engine Valve Lifters
Active Fuel Management Valve Lifter
from $83.99
This product is not rated
Active Fuel Management Valve Lifter
Engine Valve Lifters

What are the top-rated 2014 Chevrolet Caprice Valve Cover and Cylinder Heads?

Top-rated Valve Cover and Cylinder Heads for your 2014 Chevrolet Caprice based on customer reviews/ratings are:
Engine Cylinder Head Gasket
from $52.99
(4)
Engine Cylinder Head Gasket
“Worked great no issues !”
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
from $87.99
(1)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
“Like Felpro products, excellent quality”