2014 BMW X6 Fuel and Emissions Systems
More 2014 BMW X6 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2014 BMW X6, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2014 BMW X6 Fuel and Emissions Systems
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Fuel Injector Seal Kit (Part No.AS067)
from
$6.49
CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials.
- Services one injector.
Bosch – Bosch Air Mass Sensor (Part No.B3150266758BOS)
from
$212.36
Bosch air mass sensors are built to exacting specifications as required for such a sensitive measuring device. Through a precise manufacturing process, the correct type and thickness of platinum wire or thick film ceramic measuring elements are selected and accurately calibrated to provide optimum performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Measurement of air mass (gas mass) through-flow per unit of time, independent of density and temperature
- Extensive measuring range
- Highly sensitive, particularly for small changes in flow rate
- Wear-free since there are no moving parts
- Insensitive to dirt and contamination
- Utilizes the factory style mounts, connectors and fittings
- Provides exceptional reliability
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 18.8" Long, Heated, Direct Fit (Part No.24365)
from
$196.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Bosch – Leak Detection Pump (Part No.B70732233919BOS)
from
$114.15
The Bosch Fuel Vapor Leak Detection Pump ascertains leaks or related problems in the fuel system. A functional Vapor Leak Detection Pump is necessary in states that require an Emissions Inspection.
Product Features:
See More
Product Features:
- Helps to reduce atmospheric pollution due to hydrocarbon emissions
- Direct replacement for a proper fit every time
- Durable against salt, debris, and other harsh undercar conditions
- On-vehicle and laboratory testing has been conducted on this part to ensure a trouble-free performance
Rein – Breather Hose (Part No.ABV0194)
from
$74.99
Rein Automotive OE quality breather hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses, Rein hoses are identical to the OEM.
Product Features:
See More
Product Features:
- Matches original equipment design specifications.
- Manufactured with high quality materials.
- Direct fit for easy installation.
- Resistant to heat, salt, road debris, oil and other contaminants.
Rein – Cap-Fuel (Part No.CPF0031)
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1499)
from
$168.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Clamp (Part No.FG1689)
from
$512.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Bosch – High Pressure Sensor (Part No.0261545071)
from
$89.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPA1049)
from
$74.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Original Equipment – AMBIENT TEMP SENSOR (Part No.P4025449414OEA)
from
$50.62
AMBIENT TEMP SENSOR
Vemo – Ambient Temp Sensor (Part No.P4025449414VMO)
from
$32.40
Ambient Temp Sensor
Bosch – Direct Injection Fue (Part No.E3027418168BOS)
from
$508.10
Direct Injection Fue
Bosch – Direct Injection Fuel Pump, External High Pressure (Part No.E3027650862BOS)
from
$479.72
Bosch Gasoline Direct Injection (GDI) provides the basis for a cleaner and more economical engine generation. At the same time, it contributes to the current engine downsizing trend.
Product Features:
See More
Product Features:
- OE supplier, provides exact flow and original spray pattern for optimal performance
- Enhances a homogeneous and lean-burn combustion
- Key enabler for engine downsizing, while maintaining desired horsepower
- High-pressure fuel is injected directly into the combustion chamber
- Maintains new-car smoothness and drivability
- Backed by Bosch Limited Lifetime Warranty
APA/URO Parts – Vapor Canister Gromm (Part No.B7085566156APA)
from
$6.77
Vapor Canister Gromm
Carquest Premium – REMAN FUEL INJECTOR (Part No.A512-1335)
from
$231.99
REMAN FUEL INJECTOR
Carquest Premium – Remanufactured Fuel Injector (Part No.A512-1075)
from
$85.99
CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications.
- Includes new o-rings and seals made of premium OE quality materials.
- Includes application specific technical bulletin, where applicable.
NTK – Switching Oxygen Sensor: 4 Wire, 16.75" Long, Heated, Direct Fit (Part No.25612)
from
$112.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
NTK – Switching Oxygen Sensor: 4 Wire, 21.75" Long, Heated, Direct Fit (Part No.25711)
from
$210.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPE2428)
from
$146.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPE2483)
from
$146.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPE2486)
from
$101.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Bosch – Fuel Pump Seal – Mec (Part No.E3039250029BOS)
from
$2.92
Fuel Pump Seal – Mec
Popular 2014 BMW X6 Fuel and Emissions Systems Categories
2014 BMW X6 Fuel and Emissions Systems
You count on your 2014 BMW X6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 75 Fuel and Emissions Systems ranging in price from $2.92 to $643.86, you’re sure to find everything you need for your 2014 BMW X6.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 16 different brands like Bosch, Carquest Premium, and Delphi. 2014 BMW X6 Fuel and Emissions Systems start as low as $2.92!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 546 extensive product reviews on 2014 BMW X6 Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2014 BMW X6 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2014 BMW X6
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 BMW X6 running right for years to come. In our inventory you’ll find brands like Bosch, Carquest Premium, Delphi, and even more.
Popular Rein Fuel and Emissions Systems
You’ll find popular Rein brand products across Gas Caps. All are waiting to get your 2014 BMW X6 back on the road. Some of the top-rated Rein products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 2014 BMW X6, and some of our most reviewed parts include:
FAQs for 2014 BMW X6 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2014 BMW X6?
Out of 75 Fuel and Emissions Systems for the 2014 BMW X6, the most popular in our inventory are:
