2014 BMW Alpina B7L xDrive Brake Parts

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

• Triggers a warning light on the dashboard
• Should be replaced each time the brake pad is replaced
• Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

• Wearever Brake Shoes come bonded or riveted based on OE design.
• Wearever Brake Shoes are coated to prevent rust.
• Wearever Brake Shoes are 100% New not remanufactured.
• Brand may vary by location

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Pilenga Brake Discs, 100% Made in Italy. Pilenga Bimetallic brake rotor feature steel discs attached to an aluminum hub, significantly reducing the weight of the disc assembly. The light weight bimetallic disc provides a reduction of inertial forces, increased acceleration, enhanced braking performance and reduced vehicle emissions. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended disc life and improved visual appearance. Pilenga manufactures OE-quality brake discs that assures maximum performance and enhanced driving comfort, providing the same levels of quality, technology and performance that are found in many of the OEM fitments. With enhanced thermal inertia, Pilenga high carbon discs reduce both vibration and noise. Pilenga’s meticulously controlled production process makes it possible to precisely contrast the chemical composition of the cast iron, maximizing the percentage of carbon in the discs.

Product Features:

• OE-Equivalent and a direct fit replacement
• Excellent braking performance.
• Attractive appearance (strong visual impact combined with alloy wheels)
• Eco-Friendly long lasting corrosion resistance
• High carbon content
• No reduction in friction coefficient with Pilenga coated brake discs

Brake Adjuster

Product Features:

• EuroStop pads have been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
• Rotors coated for optimum anti-corrosion protection
• High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
• Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Pads manufactured in Europe for European applications
• ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Includes 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

Parking Brake Hardware Kit

TRW Automotive supplies master cylinder brake actuation systems featuring quality and performance. TRW’s master cylinder product portfolio covers a wide range of vehicles, from small cars up to truck and SUV platforms. These systems can offer lighter weight, with options such as micro master cylinders and aluminum master cylinders through to heavy-duty master cylinders designed for the durability and variable loading conditions of the light-truck market. These systems function with the help of a series of brake fluid sensors, which are located on the reservoir tank. This series includes vacuum sensors, brake light switches, and travel sensors.

Product Features:

• Low volume uptake
• High efficiency
• Low pressure differential between primary and secondary circuits
• Good bleedability
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)
• Central valve version suitable for ABS

Dorman’s Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:

• Replacement restores disc brakes to proper operation
• Replacement prevents uneven braking
• Direct replacement for a proper fit
• Manufactured to strict engineering quality standards

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Single layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion

The ATE Caliper Guide Pin Cover is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!

Product Features:

• All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks.
• New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets
• High temperature EPDM rubber for extended life.
• Premium silicone lubrication provides smoother operation.
• The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.

This wheel disc hardware kit includes rubber components used to protect the caliper pins or bolts. Worn or cracked rubber components will allow excessive movement of guide pins or bolts.

Brake Fluid Level Sensor

ATE Continental is further extending its range of Brake Caliper Pin Boot Kits for ATE brake calipers. ATE caliper Pin Boot Kits are an essential component of ATE-designed fist floating brake calipers. The floating caliper consists of a holder and housing, which is located in rubber damping pins and sleeves.

Product Features:

• Reduced cost
• OE Quality
• Complete Kit

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

• Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
• Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
• Quality assured – materials tested to exacting government-regulated safety and durability standards
• Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:

• Guaranteed factory fit to original equipment specifications
• Meets or exceeds original equipment factory safety standards

Akebono EURO® Ultra-Premium ceramic brake pads provide exactly the ideal vehicle control and performance response intended by the manufacturers of European makes. Maintain the enhanced pedal feel of European braking performance with brake pads and friction formulas engineered specifically for your vehicle and manufactured in the USA. Brake Pads That Ensure Optimal Responsiveness and Cleaner Wheels European car owners across North America now have a brake pad solution that will keep their wheels virtually free from dust and provide the European stopping power they expect. The use of our exclusive, highly advanced ceramic brake pad technology means that Akebono’s EURO Ultra-Premium brake pads provide excellent stopping power while extending rotor life and virtually eliminating brake dust, so the wheels on your European vehicle will remain their cleanest. In addition, Akebono EURO Ultra-Premium ceramic brake pads control noise, vibration, and harshness (NVH) and help ensure longer rotor life. They are the ultimate upgrade for semi-metallic and low-metallic brake pads. Akebono: The Industry Standard for European Manufacturers For over two decades, Akebono Ceramic Technology® (ACT) has been standard on many of North America’s passenger cars, light trucks, and SUVs and has set the benchmark for ceramic pads used in OE vehicle production. Now European manufacturers request Akebono brake products, and we can deliver that level of reliability to your replacement brake pads. Akebono manufactures replacement disc pads that contain the same materials, engineering, quality standards, and advanced technologies used to create our original ceramic brake pads. The use of Akebono ceramic brake pads ensures customer satisfaction and eliminates unnecessary return visits to the shop.

Product Features:

• Ultimate upgrade for OE semi-metallic, organic and low-metallic brake pads
• Ultra-Quiet – controls noise, vibration and harshness level
• European braking performance with enhanced pedal feel
• Extremely rotor friendly for longer rotor life
• Friction formulas specially designed for European vehicles

Carquest Platinum Professional brake pads are a premium alternative to original equipment brake pads that provide superior stopping performance, quieter braking and cleaner wheels. All CQ Platinum Professional brake pads are manufactured by a vertically

Product Features:

• Industry-leading number of application specific formulations for maximum performance and extended pad life
• On-vehicle testing similar to original equipment tests
• Patented 4-Layer HEX Shim Technology provides quiet braking
• HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
• Burnishing compound allows for a faster break-in of pads and rotors
• PTFE coated hardware and caliper pin grease included for nearly every application
• Wear sensors included on most European applications that require replacement
• Powder-coated backing plate prevents corrosion

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Includes 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

The ATE Caliper Guide Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
• Corrosion resistant coating for long-lasting durability against harsh roads
• Manufactured with quality materials to suppress high stress levels
• Helps deliver a quieter, more efficient braking system

Nut

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time