from

$369.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable),thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes side seals, but no side shims.

Product Features:

Fits Toyota 7.5″ with V6 engine
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.

from

$343.99

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$12.29

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$37.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$384.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Models w/ factory 3.07 & 4.88’s have a different offset and will need a new dropout when changing ratio.

Product Features:

Fits Toyota V6 rear
8.125″ ring gear diameter
29 spline pinion
10 ring gear bolts
5.29 ratio

from

$6.79

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$39.99

8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:

Pinion depth shim kit for Toyota 7.5″, 8″ and V6

from

$14.99

T100 & Tacoma w/LOC pinion nut.

Product Features:

Pinion nut
Fits Toyota Tacoma and T100 with factory locking differential

from

$23.99

Toyota 29spl V6 and clamshell front, outer oil slinger.

Product Features:

Outer slinger
Fits Toyota 8″ clamshell front

from

$12.99

High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:

Better Wear Protection
Increased Protection against Low Speed Pre-Ignition
Increased Fuel Efficiency
Better Protection for Vehicle Exhaust Emissions Equipment
Improved Compatibility with Fuels Containing Ethanol
Superior Corrosion Protection
Made in USA

from

$8.48

Pinion Seal

from

$21.99

CONE

from

$51.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits Toyota 8″ with 4 cylinder engine
Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.

from

$136.38

Differential Bearing

from

$42.25

Transfer Case Switch

from

$126.99

Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).

Product Features:

Bearing race driver
Fits 30306 race
All steel construction

from

$7.99

Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.

Product Features:

Oil baffle
Fits Toyota Landcruiser reverse rotation front

from

$13.99

Crush Sleeve for Toyota V6, Landcruiser reverse front & Tacoma/T100 with factory locker, 1.820″ long.

Product Features:

Crush sleeve for Toyota V6, Landcruiser reverse rotation front and Tacoma/T100 with factory locker
1.820″ tall

from

$13.99

Crush Sleeve for GM 55-62 car & truck and Toyota 8″. 2.510″ long.

Product Features:

Crush sleeve for 1955-1962 GM passenger car and Toyota 8″ with 4 cylinder engine
2.510″ tall

from

$295.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits standard rotation Toyota 7.5″ with 4 cylinder engine
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$234.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Toyota 8″ and 4 cylinder engine, 1985 and down or 1986 and up with aftermarket ring and pinion set
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$8.99

Product Features:

Side adjuster lock bolt
Fits Toyota 8″ 4 or 6 cylinder engine

from

$8.99

Product Features:

Side adjuster lock
Fits Toyota V6

from

$1324.99

The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:

Fits Toyota 8″ with 4 cylinder engine
Forged case and 8620 internals for added strength
Works with a variety of air delivery systems
Assembled in the USA

from

$889.99

8″ IFS clamshell carrier, 3.91 and up, 07 & up FJ, 05 & up TAC/T100/TNDRA.

Product Features:

Standard open carrier case
Does not include spider gears
Fits Toyota 8″ clamshell front
3.91 and up ratios only

from

$6.99

Toyota 7.5″, 8″, & V6 ring gear bolt retainer plate (5 needed).

Product Features:

Ring gear bolt retainer plate for Toyota 7.5″ 8″ and 8″ V6
5 needed

from

$6.99

Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:

Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
11mm x 1.0

from

$15.99

Ring Gear bolt for Toyota T100, Tacoma & 8″ IFS front. 12mm x 1.0.

Product Features:

Ring gear bolt for Toyota T100 and Tacoma rear without factory locking differential and Toyota Clamshell front
12mm x 1.0

2013 Toyota 4Runner Differentials

More 2013 Toyota 4Runner Differentials

Essential 2013 Toyota 4Runner Differentials

Yukon Gear – Master Overhaul Kit For Toyota 7.5" IFS Differential, V6 (Part No.14116)

Dorman – Rear axle shaft kit for Toyota pickup (Part No.630-335)

Motive Gear – Pinion Seal (Part No.1177)

National – Shaft Repair Sleeve (Part No.99157)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota V6 In A 5.29 Ratio (Part No.24593)

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Yukon Gear – T100 & Tacoma With Loc Pinion Nut (Part No.33157)

Yukon Gear – Oil Slinger For Toyota 29 Spline Rear Pinion & Clamshell Front (Part No.33026)

Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

Corteco – Pinion Seal (Part No.J7010163867CFW)

FAG US – CONE (Part No.KLM102949)

Yukon Gear – Minor Install Kit For Toyota ’85 And Older Or Aftermarket 8" Differential (Part No.12072)

Koyo – Differential Bearing (Part No.J7060163891KOY)

FAE – Transfer Case Switch (Part No.J7101947097FAE)

Yukon Gear – Bearing Race Driver (Part No.56005)

Yukon Gear – Oil Baffle (Part No.33007)

Yukon Gear – Crush Sleeve (Part No.33118)

Yukon Gear – Crush Sleeve (Part No.33101)

Yukon Gear – Pinion Install Kit For Toyota 7.5" IFS Differential (Four Cylinder Only) (Part No.13086)

Yukon Gear – Pinion Install Kit For Early Toyota 8" Differential (Part No.13088)

Yukon Gear – T8 & V6 Bolt For Adjuster Lock (Part No.33366)

Yukon Gear – V6 Side Bearing Adjuster Lock (Without Bolt) (Part No.33364)

Yukon Gear – Zip Locker For Toyota 8" 4 Cylinder (Part No.34033)

Yukon Gear – 8" IFS Clamshell Carrier, 3.91 And Up, 07 & Up FJ, 05 & Up Tac/T100/Tndra (Part No.20135)

Yukon Gear – Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (Part No.33061)

Yukon Gear – Ring Gear Bolt (Part No.33060)

Yukon Gear – Ring Gear Bolt For Toyota T100, Tacoma & 8" IFS Front (Part No.33059)

Popular 2013 Toyota 4Runner Differentials Categories

2013 Toyota 4Runner Differentials

Differentials Brands To Make Your 2013 Toyota 4Runner Last

Popular Valvoline Differentials

FAQs for 2013 Toyota 4Runner Differentials

What are the most purchased Differentials for the 2013 Toyota 4Runner?

What are the top-rated 2013 Toyota 4Runner Differentials?

More Popular Parts for All Makes