2013 SRT Viper Fuel and Emissions Systems

Essential 2013 SRT Viper Fuel and Emissions Systems

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1056)

Manifold Absolute Pressure Sensor (MAP)

from

$32.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

DENSO – Oxygen Sensor: 4 Wire, 10.08" Long, Heated, Exact Fit (Part No.234-4545)

Oxygen Sensor: 4 Wire, 10.08" Long, Heated, Exact Fit

from

$75.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

NTK – Switching Oxygen Sensor: 4 Wire, 10" Long, Heated, Direct Fit (Part No.23162)

Switching Oxygen Sensor: 4 Wire, 10" Long, Heated, Direct Fit

from

$79.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

NTK – Switching Oxygen Sensor: 4 Wire, 18" Long, Heated, Direct Fit (Part No.23165)

Switching Oxygen Sensor: 4 Wire, 18" Long, Heated, Direct Fit

from

$84.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

DENSO – Oxygen Sensor (Part No.C5010690361ND)

Oxygen Sensor

from

$102.81
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Carquest Premium – Evaporative Emissions System Leak Detection Pump (Part No.VDN1037)

Evaporative Emissions System Leak Detection Pump

from

$423.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1026)

Ambient Air Temperature Sensor

from

$24.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Evaporative Emissions Purge Solenoid Valve (Part No.911-482)

Evaporative Emissions Purge Solenoid Valve

from

$32.99
Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.

Product Features:
  • Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Fuel Injector O-Ring Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Vapor Canister (Part No.CPN1219)

Vapor Canister

from

$247.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1042)

Vapor Canister Purge Solenoid

from

$29.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

2013 SRT Viper Fuel and Emissions Systems

You count on your 2013 SRT Viper to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 14 Fuel and Emissions Systems ranging in price from $7.49 to $423.99, you’re sure to find everything you need for your 2013 SRT Viper.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 7 different brands like Felpro, NTK, and Bosch. 2013 SRT Viper Fuel and Emissions Systems start as low as $7.49!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 242 extensive product reviews on 2013 SRT Viper Fuel and Emissions Systems.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2013 SRT Viper below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 2013 SRT Viper

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 SRT Viper running right for years to come. In our inventory you’ll find brands like Felpro, NTK, Bosch, and even more.

Popular Bosch Fuel and Emissions Systems

You’ll find popular Bosch brand products across Oxygen Sensors. All are waiting to get your 2013 SRT Viper back on the road. Some of the top-rated Bosch products in these categories are:

Top-Rated Fuel and Emissions Systems


If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 2013 SRT Viper, and some of our most reviewed parts include:
Fuel Injector O-Ring Kit
from $7.49
(109)
Fuel Injector O-Ring Kit
Fuel Injector O-Ring Kits

FAQs for 2013 SRT Viper Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 2013 SRT Viper?

Out of 14 Fuel and Emissions Systems for the 2013 SRT Viper, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits
Vapor Canister Purge Solenoid
from $29.99
This product is not rated
Vapor Canister Purge Solenoid
Canister Purge Solenoids