2013 Mitsubishi Lancer Brake Rotors and Drums
More 2013 Mitsubishi Lancer Brake Rotors and Drums
Find your specific 2013 Mitsubishi Lancer original or aftermarket Brake Rotors and Drums below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2013 Mitsubishi Lancer Brake Rotors and Drums
Carquest Wearever – Brake Drum – Rear (Part No.YH248439)
from
$41.49
CARQUEST Wearever Brake Drums are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and balance that eliminates noise and enhances pedal feel. CARQUEST Wearever Brake Drums are designed to dissipate heat helping to eliminate brake fade and increase the life of your brake shoes. Ready to install out of the box to save you time.
Product Features:
See More
Product Features:
- Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
- Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
- OE design to dissipate heat, increasing brake shoe life.
- Proper harmonic design and balance helps to reduce brake noise.
- Optimal metallurgy and casting thickness to preventing warping
- Ready for immediate “out-of-the-box” installation (after cleaning) Advance Auto Parts Drum Tips:
- Recommended using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
- Always use a torque wrench to tighten wheel bolts to the manufacturers” specifications to prevent pedal pulsation.
- Always replace drums in pairs to improve stopping power.
ACDelco – Brake Drum (Part No.N2000640795ACD)
from
$104.18
Brake Drum
Carquest Wearever – Brake Rotor (Part No.YH145706)
from
$80.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Design, Enhanced Rust Protection (Part No.YH145705C)
from
$73.99
Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Zinc and aluminum anti-corrosion coating maintains a like-new appearance
- Manufactured to exacting quality and dimensional specifications for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Non-directional finish for decreased break-in time and reduced brake noise
- Brand may vary by location
Carquest Wearever – Brake Rotor (Part No.YH145377)
from
$68.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Wearever – Brake Rotor (Part No.YH141543)
from
$53.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Pilenga – Coated High Carbon Brake Disc (Rotor) (Part No.N1000167196PIC)
from
$84.50
Pilenga Brake Discs, 100% Made in Italy The Pilenga coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. Pilenga manufactures OE-Quality Brake Discs that assures maximum performance and enhanced driving comfort, providing the same levels of quality, technology and performance that are found in many of the OEM fitments. With enhanced thermal inertia, Pilenga High Carbon discs reduce both vibration and noise. Pilenga’s meticulously controlled production process makes it possible to precisely contrast the chemical composition of the cast iron, maximizing the percentage of carbon in the discs.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit replacement
- Excellent braking performance.
- Attractive appearance (strong visual impact combined with alloy wheels)
- Eco-Friendly long lasting corrosion resistance
- High carbon content
- No reduction in friction coefficient with Pilenga coated brake discs
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000572515WBC)
from
$76.36
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000303108WBC)
from
$65.39
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Pilenga – Coated High Carbon Brake Disc (Rotor) (Part No.N1000167192PIC)
from
$61.86
Pilenga Brake Discs, 100% Made in Italy The Pilenga coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. Pilenga manufactures OE-Quality Brake Discs that assures maximum performance and enhanced driving comfort, providing the same levels of quality, technology and performance that are found in many of the OEM fitments. With enhanced thermal inertia, Pilenga High Carbon discs reduce both vibration and noise. Pilenga’s meticulously controlled production process makes it possible to precisely contrast the chemical composition of the cast iron, maximizing the percentage of carbon in the discs.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit replacement
- Excellent braking performance.
- Attractive appearance (strong visual impact combined with alloy wheels)
- Eco-Friendly long lasting corrosion resistance
- High carbon content
- No reduction in friction coefficient with Pilenga coated brake discs
Carquest Platinum Painted – Painted Rotor (Part No.YH145706P)
from
$85.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Platinum Painted – Painted Rotor (Part No.YH291438P)
from
$68.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Wearever – BRAKE ROTOR (Part No.YH145705)
from
$63.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Brembo – Brake Disc (Part No.N1000466852BRC)
from
$884.76
Brake Disc
Carquest Wearever – Brake Rotor (Part No.YH291438)
from
$63.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-Directional finish decreases break-in time
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000179359WBC)
from
$65.39
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Carquest Platinum Painted – Painted Rotor (Part No.YH200454P)
from
$82.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Platinum Painted – Painted Rotor (Part No.YH145672P)
from
$56.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000466093WBC)
from
$82.62
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000302551WBC)
from
$51.51
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Carquest Wearever – Brake Rotor (Part No.YH200454)
from
$77.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000451075WBC)
from
$55.04
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Carquest Wearever – Brake Drum (Part No.YH145047)
from
$57.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000466095WBC)
from
$67.40
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Carquest Platinum Painted – Painted Rotor (Part No.YH245331P)
from
$61.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Wearever – Brake Rotor (Part No.YH145672)
from
$51.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Design, Enhanced Rust Protection (Part No.YH145672C)
from
$66.99
Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Zinc and aluminum anti-corrosion coating maintains a like-new appearance
- Manufactured to exacting quality and dimensional specifications for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Non-directional finish for decreased break-in time and reduced brake noise
- Brand may vary by location
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000229317WBC)
from
$40.07
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
Popular 2013 Mitsubishi Lancer Brake Rotors and Drums Categories
2013 Mitsubishi Lancer Brake Rotors and Drums
Maybe you’re in the middle of a full rebuild of that 2013 Mitsubishi Lancer. Maybe you just need a couple of Brake Rotors and Drums. Either way, Advance Auto Parts has 27 different Brake Rotors and Drums in our inventory ranging from $41.49 to $884.76. That means you can find the exact parts or products you need to keep that 2013 Mitsubishi Lancer running smoothly.
Brake Rotors and Drums are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2013 Mitsubishi Lancer. Carquest Platinum Painted, Carquest Platinum Plus, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Brake Rotors and Drums for your 2013 Mitsubishi Lancer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,566 reviews in this category, some of the top rated parts include Brake Rotor with 4.4 stars and Brake Rotor with 4.1 stars.
So if you’re in the market for aftermarket Brake Rotors and Drums to keep your 2013 Mitsubishi Lancer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Brake Rotors and Drums Brands To Make Your 2013 Mitsubishi Lancer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2013 Mitsubishi Lancer demands trusted brand parts and products to keep it running. Many trusted brands of Brake Rotors and Drums make up Advance Auto Parts’ inventory, and all are ready to help make your Lancer the best it can be. Be sure to browse some of our top Brake Rotors and Drums brands and parts.
Popular Carquest Platinum Plus Brake Rotors and Drums
We carry Carquest Platinum Plus parts in our stock across Rear Brake Rotors and Front Brake Rotors categories, plus more. For a 2013 Mitsubishi Lancer, our most popular Carquest Platinum Plus Brake Rotors and Drums include:
from
$66.99
(1)
Coated Brake Rotor: Meets or Exceeds OE Design, Enhanced Rust Protection
Rear Brake Rotors
from
$95.99
(7)
Coated Brake Rotor: Meets or Exceeds OE Design, Enhanced Rust Protection
Front Brake Rotors
Top 2013 Mitsubishi Lancer Brake Rotors and Drums from Carquest Platinum Painted
Carquest Platinum Painted products are another trusted brand when it comes to Brake Rotors and Drums for your 2013 Mitsubishi Lancer. Popular Carquest Platinum Painted parts include:
FAQs for 2013 Mitsubishi Lancer Brake Rotors and Drums
What are the most purchased Brake Rotors and Drums for the 2013 Mitsubishi Lancer?
Out of 27 Brake Rotors and Drums for the 2013 Mitsubishi Lancer, the most popular in our inventory are:
What are the top-rated 2013 Mitsubishi Lancer Brake Rotors and Drums?
Top-rated Brake Rotors and Drums for your 2013 Mitsubishi Lancer based on customer reviews/ratings are:
