2013 Mercedes-Benz GL450 Cooling and Climate Controls

Name: A/C Compressor
Brand: Behr
SKU: R10002688120BEH
Price: 621.51 USD

Below you will find various in-demand Mercedes-Benz Cooling and Climate Controls, components and accessories for your 2013 GL450. Advance Auto Parts has popular GL450 parts like Heating Parts, Air Conditioning Parts, Blower Motor and Related Products and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other GL450 model years including 2007, 2008, 2009, 2010, 2011, 2012, 2014, 2015, 2016 and more. Select a category of 2013 Mercedes-Benz GL450 Cooling and Climate Controls below and start saving instantly.

Popular 2013 Mercedes-Benz GL450 Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

Drive Motor Inverter Cooler Water Pumps

Blower Motors

AC Compressor Without Clutch

Thermostat and Water Outlet Assemblies

Coolant Reservoirs

Coolant Temperature Sensors

AC Evaporator Anti-Ice Sensors

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Blower Motor Resistors

AC Condensers

AC Evaporators

Engine Auxiliary Water Pumps

Accumulator and Receiver Driers

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

Water Pump Gaskets

Expansion Valve and Orifice Tubes

Radiator Drain Plugs

AC Compressor Pressure Switches

AC Refrigerant Pressure Sensors

Radiator Mount Brackets

Radiator Cap Tester Adapters

Engine Coolant Reservoir Clip

Essential Cooling and Climate Controls for 2013 Mercedes-Benz GL450s

from

$621.51

A/C Compressor

from

$121.99

New Platinum Pro A/C Condenser

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$125.51

Restore your vehicle’s cooling system to proper working order, and minimize the risk of premature failure, by installing a Bosch Auxiliary Water Pump. Bosch Auxiliary Water Pumps are designed to operate in the highly-stressful environment of today’s cooling systems. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

OE Quality, reliability and service life
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
CO²-reduction by optimized efficiency, speed control and reduced weight
Coverage of a wide hydraulic performance range
Reduced noise level

from

$4.21

The Elring Engine Coolant Thermostat Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Seals the thermostat and helps prevent coolant from leaking from the engine for proper engine temperature
Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$214.99

Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$19.79

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$174.99

Rein OE Quality Air Conditioning Evaporator. Pressure tested before leaving the factory. Designed according to OE specifications, ensuring fit and function are identical to the original evaporator.

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$19.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$41.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$6.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$42.99

Rein air conditioning receiver/drier units are manufactured with premium OE quality materials designed to withstand the demands of automotive air conditioning systems. Rein air conditioning receiver/drier units are designed to prevent factors that cause premature failure in automotive air conditioning systems.

Product Features:

Rein air conditioning receiver/drier units are manufactured with premium OE quality materials which offer maximum protection from premature failures.
Rein air conditioning receiver/drier units are designed as direct-fit replacements to ensure trouble-free proper installation.
Rein air conditioning receiver/drier units come complete with hardware when necessary for installation to save installation time and additional costs.
Replace receiver/drier units when faulty or when a compressor fails. compressor failures may lead to contamination of receiver/drier units and replacement is recommended to prevent future issues.

from

$137.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$20.37

ACM is a supplier of Original Equipment quality climate control products.

from

$69.77

ACM is a supplier of Original Equipment quality climate control products. 3 pin connector

from

$20.37

Radiator Mount

from

$109.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$217.99

This new pump is 100% tested to ensure the highest quality. Each unit is built to meet or exceed all OE specifications and is validated for fit, form, and function. Application specific design to ensure a perfect fit and correct operation for unsurpassed quality.

Product Features:

Electric water pump
Specialized for vehicles using supplemented cooling for the engine or components
Plastic housing
All components necessary for installation are supplied with pump
Follow all enclosed instructions to maximize pump life and validate warranty

from

$56.99

Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$442.84

Blower Motor

from

$39.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$82.99

Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Resistant to cracking and wear from heat cycles preventing coolant loss
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$9.02

Water Pump Gasket

from

$333.48

Radiator

from

$508.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$271.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$159.54

The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:

All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.

Upgrade your 2013 Mercedes-Benz GL450 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2013 Mercedes-Benz GL450, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Cooling and Climate Controls are key to keeping your GL450 functioning at its best. At Advance Auto Parts, we offer a wide selection of 48 Cooling and Climate Controls for the 2013 Mercedes-Benz GL450, designed to meet your needs without breaking the bank. From Heating Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2013 Mercedes-Benz GL450 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $2.92 to $621.51, with an average price of $170.14. Our 48 Cooling and Climate Controls in stock come from 21 trusted brands, so you’re sure to find the right part for your 2013 Mercedes-Benz GL450 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Mercedes-Benz GL450, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. With 296 customer reviews and counting, our 2013 Mercedes-Benz GL450 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2013 Mercedes-Benz GL450 is always ready to roll. We’re committed to providing you with everything you need to keep your GL450 in top shape, all in one place. Start shopping confidently below for your 2013 Mercedes-Benz GL450!

Best-Selling Heating Parts for 2013 Mercedes-Benz GL450s

Enhance the driving experience in your Mercedes-Benz with 1 quality Heating Part components, starting at $109.99.

show more show less

from

$109.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Most Popular 2013 Mercedes-Benz GL450 Air Conditioning Parts

Customize your Mercedes-Benz with 15 Air Conditioning Parts products like AC Compressor Without Clutch, Expansion Valve and Orifice Tubes, and AC Condensers, all priced under $621.51.

show more show less

from

$71.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$194.72

The ACM A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meet or exceed OEM specifications.
Utilizes the factory style fittings and connectors
Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.

from

$69.77

ACM is a supplier of Original Equipment quality climate control products. 3 pin connector

from

$621.51

A/C Compressor

from

$390.06

Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.

Product Features:

OEM Quality Direct fit Application
Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.

from

$326.99

A/C Condenser

from

$180.67

ABS Speed Sensor

from

$144.99

New Platinum Pro A/C Condenser, GL And M Class

Product Features:

GL And M Class, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$124.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$87.49

A/C Expansion Valve

from

$56.65

A/C Receiver Drier

from

$41.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$24.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$20.37

ACM is a supplier of Original Equipment quality climate control products.

from

$17.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

Top Picks for 2013 Mercedes-Benz GL450 Blower Motor and Related Products

Upgrade Mercedes-Benz GL450s with top-quality Blower Motor and Related Products parts, including 4 OEM and aftermarket selections for your 2013 model.

show more show less

from

$255.39

Blower Motor

from

$508.99

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$442.84

Blower Motor

from

$299.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

In-Demand Engine Cooling Parts for 2013 Mercedes-Benz GL450s

Select from 28 premium Engine Cooling Parts parts for your 2013 Mercedes-Benz GL450, with prices ranging from $2.92 to $613.99.

show more show less

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$19.79

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$19.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$214.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$193.99

This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.37

Radiator Mount

from

$613.99

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$427.10

DENSO is a leading supplier of radiators to OE car makers around the world. Manufacturers rely on our quality and innovation to remain on the leading edge of engine cooling technology. Our OE experience and know-how ensure our products provide unmatched performance, reliability and fitment. Radiator performance is essential for proper engine cooling and function. DENSO’s radiator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturer’s rigid standards. All DENSO radiators pass our strict durability and function tests. As the result, our radiators deliver reliable performance even under the most demanding conditions. Radiator types: Plastic tank with aluminum core. Plastic tank with copper core. Cross-flow and down-flow configurations. DENSO is known for the unsurpassed quality of its products. Plastic, copper or aluminum components: it doesn’t matter. Our DENSO radiators are dependable, lightweight and made to last. An investment in a DENSO radiator will pay dividends in the long run. Radiators can fail causing leaks or inefficient cooling. This can lead to your engine to run hotter which in turn creates excess wear and tear on the engine. DENSO radiators are designed with our First Time Fit® philosophy in mind. You get radiators that drop in easily without the need for adjustment, brackets or modification of any kind. Our radiators are precision built to provide the right part, the right fit, the first time.

Product Features:

Fin Pitch – Superior fin waves provide a higher heat transfer.
Flow Configuration – Available in cross-flow and down-flow configurations.
Aluminum or Copper Core – Thin-tube construction assures maximum cooling efficiency.

from

$373.78

Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style mounting brackets and hose connections.
Integrated transmission oil cooler when applicable.
Compact and lightweight.

from

$344.99

The CARQUEST New Water Pump features all new, original equipment-quality components for proper fit and long-life performance. Each pump includes heavy-duty unitized bearings, pressed-on hubs, precision machined housings, unitized seals and optimal impeller clearance, plus all new water pumps are 100% factory tested to assure the highest quality product. Each unit is built to meet or exceed all Original Equipment specifications and is validated for fit, form, and function. Also, application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust.

Product Features:

Durable housing features precisely machined mounting surfaces for proper sealing
All gaskets or seals necessary for installation are supplied with pump
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Follow all enclosed instructions to maximize pump life and validate warranty

from

$294.64

Water Pump

from

$293.99

Water Pump

from

$252.99

Electric water pump
Specialized for vehicles using supplemented cooling for the engine or components
Plastic housing
All components necessary for installation are supplied with pump
Follow all enclosed instructions to maximize pump life and validate warranty

from

$233.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$217.99

Electric water pump
Specialized for vehicles using supplemented cooling for the engine or components
Plastic housing
All components necessary for installation are supplied with pump
Follow all enclosed instructions to maximize pump life and validate warranty

from

$187.27

OE Quality, reliability and service life
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
CO²-reduction by optimized efficiency, speed control and reduced weight
Coverage of a wide hydraulic performance range
Reduced noise level

from

$161.93

The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:

OE-Equivalent and Direct Fit for easy Installation.
OE style connections and fittings.
Made of highly durable materials.
Resistant to thermal wear and cracking.

from

$88.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$56.99

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$29.99

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$20.03

EXPANSION TANK CAP

from

$15.79

WATER TEMP. SENSOR

from

$6.99

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$4.21

Seals the thermostat and helps prevent coolant from leaking from the engine for proper engine temperature
Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$3.66

Thermostat Gasket

from

$2.92

Rivet

Top-Rated Cooling and Climate Controls Brands For Your 2013 Mercedes-Benz GL450

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2013 Mercedes-Benz GL450s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2013 GL450 start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2013 Mercedes-Benz GL450 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2013 Mercedes-Benz GL450, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2013 Mercedes-Benz GL450. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Popular Carquest Premium 2013 Mercedes-Benz GL450 Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2013 Mercedes-Benz GL450 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2013 GL450, Advance Auto Parts carries a full inventory of 15 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $17.99 to $508.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$71.99

This product is not rated

A/C Filter Drier with Pad Mount

“”

from
$214.99

This product is not rated

Integrated Thermostat Housing: With Sensor, With Gasket, 212 Degrees

“”

from
$19.99

This product is not rated

Coolant Temperature Sensor with O-Ring and Install Clip

“”

FAQs for 2013 Mercedes-Benz GL450 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2013 Mercedes-Benz GL450s?

Out of 48 Cooling and Climate Controls that fit 2013 Mercedes-Benz GL450s, the following parts are the top sellers:

Coolant Temperature Sensor with O-Ring and Install Clip (12422889) – $19.99
A/C Filter Drier with Pad Mount (10125046) – $71.99
Auxiliary Coolant Pump (11571488) – $193.99

What’s the price range for 2013 Mercedes-Benz GL450 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2013 Mercedes-Benz GL450 start at $2.92 and go up to $621.51 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2013 Mercedes-Benz GL450?

The average price for Cooling and Climate Controls for the 2013 Mercedes-Benz GL450 is $170.14. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Mercedes-Benz GL450 model years?

Yes, we currently carry Cooling and Climate Controls for 9 model years of Mercedes-Benz GL450s between 2007 and 2016. Cooling and Climate Controls are bought most frequently for the following model years: 2016, 2015, 2014, 2012, 2011, 2010, 2009, 2008, and 2007.

What are the cheapest Cooling and Climate Controls for my 2013 Mercedes-Benz GL450?

The cheapest 2013 Mercedes-Benz GL450 Cooling and Climate Controls we carry in stock are:

Rivet (11990827) – $2.92
Thermostat Gasket (12591768) – $3.66
Engine Coolant Thermostat Gasket (11967712) – $4.21
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Radiator Drain Cock Screw-In Type With Washer (50002914) – $6.99

What are the top-rated Cooling and Climate Controls that fit the 2013 Mercedes-Benz GL450?

Out of 296 reviews by customers, our 2013 Mercedes-Benz GL450 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2013 Mercedes-Benz GL450 and their top-rated products:

Engine Cooling Parts
- Engine Coolant Reservoir Cap (15480047) – $19.79
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99

What types of Cooling and Climate Controls do you sell for my 2013 Mercedes-Benz GL450?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2013 Mercedes-Benz GL450:

Can I get help with 2013 Mercedes-Benz GL450 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Cooling and Climate Controls and more.

What is your return policy for Mercedes-Benz GL450 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz GL450 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2013 Mercedes-Benz GL450 Cooling and Climate Controls

Behr – A/C Compressor (Part No.R10002688120BEH)

KAI – A/C Condenser (Part No.CNDDPI3478)

Bosch – Bosch Auxiliary Water Pump (Part No.G3050465143BOS)

Elring – Engine Coolant Thermostat Gasket (Part No.G4031424417ELR)

Carquest Premium – Integrated Thermostat Housing: With Sensor, With Gasket, 212 Degrees (Part No.49452)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10253)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Rein – A/C Evaporator (Part No.ACE0279R)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Carquest Premium – Coolant Temperature Sensor with O-Ring and Install Clip (Part No.WTC1122)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2004)

Dorman – Help – Radiator Drain Cock Screw-In Type With Washer (Part No.61145)

Rein – A/C Receiver Drier (Part No.ACD0293)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1444)

ACM – Air Conditioning Evaporator Temperature Sensor (Part No.R1071421726ACM)

ACM – Air Conditioning Pressure Switch (Part No.R1054445297ACM)

Aftermarket – Radiator Mount (Part No.G1020723369AFT)

Carquest Premium – Heater Core (Part No.910716)

Carquest Premium – New Auxiliary Water Pump (Part No.T2295)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12039)

VDO – Blower Motor (Part No.R20311868952VDO)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39370)

Rein – Expansion Tank (Part No.EPT0009)

Elring – Water Pump Gasket (Part No.G3040275727ELR)

Valeo – Radiator (Part No.G1000388536VAL)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1917)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T3129)

Graf – Water Pump (Part No.G3000948663GRA)

Carquest Premium – Heater Core (Part No.910716)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83367)

ACM – A/C Expansion Valve (Part No.R1045513163ACM)

ACM – Air Conditioning Pressure Switch (Part No.R1054445297ACM)

Behr – A/C Compressor (Part No.R10002688120BEH)

Nissens – A/C Condenser (Part No.R1030420824NSS)

ACM – A/C Condenser (Part No.R1030420824ACM)

ATE – ABS Speed Sensor (Part No.N6030656614ATE)

KAI – A/C Condenser (Part No.CND4421)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44049)

ACM – A/C Expansion Valve (Part No.R1045513157ACM)

Santech – A/C Receiver Drier (Part No.R10402489804SII)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2004)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83263)

ACM – Air Conditioning Evaporator Temperature Sensor (Part No.R1071421726ACM)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39475)

Behr – Blower Motor (Part No.R20311868952BEH)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1917)

VDO – Blower Motor (Part No.R20311868952VDO)

Carquest Premium – Blower Motor: With Wheel (Part No.75153)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10253)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Coolant Temperature Sensor with O-Ring and Install Clip (Part No.WTC1122)

Carquest Premium – Integrated Thermostat Housing: With Sensor, With Gasket, 212 Degrees (Part No.49452)

Dorman – Auxiliary Coolant Pump (Part No.902-065)

Aftermarket – Radiator Mount (Part No.G1020723369AFT)

Dorman – Thermostat Assembly: Includes Sensor, Housing, and Thermostat, 217 Degrees (Part No.902-5847)

DENSO – First Time Fit Radiator (Part No.G1000478533ND)

Nissens – Radiator (Part No.G1000478533NSS)

Carquest Premium – Engine Water Pump (Part No.T5172)

APA/URO Parts – Water Pump (Part No.G30002323056APA)

Geba – Water Pump (Part No.G3000480185GEB)

Carquest Premium – New Auxiliary Water Pump (Part No.T1380)

Motorad – Integrated Thermostat Housing: With Sensor, With Gasket, 212 Degrees (Part No.669-212)

Carquest Premium – New Auxiliary Water Pump (Part No.T2295)

Bosch – Auxiliary Water Pump (Part No.G30501098083BOS)

Behr – Expansion Tank (Part No.G1030442245BEH)

Dorman – Pressurized Coolant Reservoir: Black And Clear, Plastic, Original Equipment Replacement (Part No.603-256)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12039)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Rein – Cap-Expansion Tank (Part No.CPE0029P)

Worldpac – EXPANSION TANK CAP (Part No.G10403566322BEH)

Worldpac – WATER TEMP. SENSOR (Part No.C6020656996FAE)

Dorman – Help – Radiator Drain Cock Screw-In Type With Washer (Part No.61145)

Elring – Engine Coolant Thermostat Gasket (Part No.G4031424417ELR)

Mahle – Thermostat Gasket (Part No.G4031424417MAH)

Febi – Rivet (Part No.Q2001721547FEB)