2013 Mercedes-Benz CLS63 AMG Steering and Chassis Parts

Below you will find various in-demand Mercedes-Benz Steering and Chassis Parts, components and accessories for your 2013 CLS63 AMG. Advance Auto Parts has popular CLS63 AMG parts like Ball Joints, Strut Rods, Sway Bars and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other CLS63 AMG model years including 2007, 2008, 2009, 2010, 2011, 2012, 2014 and more. Select a category of 2013 Mercedes-Benz CLS63 AMG Steering and Chassis Parts below and start saving instantly.

Popular 2013 Mercedes-Benz CLS63 AMG Steering and Chassis Parts Categories

Lower Ball Joints

Sway Bar Link Kits

Tie Rod Ends

Drive Shaft CV Joints

Rack and Pinion Boots

Strut Rods

Essential Steering and Chassis Parts for 2013 Mercedes-Benz CLS63 AMGs

from

$27.54

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories

from

$131.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$56.96

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$48.50

FEBI strictly complies with the specification of the vehicle manufacturers. They make sure that the ball joint exactly fit the corresponding vehicle type.

Product Features:

Original equipment quality
Solutions Made in Germany
Manufacturing expertise
Triple-checking system
Technology leader

from

$231.38

With Hardware The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:

OE quality, fit and performance
High quality rubber
Reinforced with advanced materials
Excellent vibration control

from

$39.35

Sway Bar Link

from

$45.82

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$39.35

Sway Bar Link

from

$63.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$63.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$42.49

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$18.69

The Lemfoerder Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$54.99

R & P Bellows

from

$14.61

The Lemfoerder Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$15.72

The Lemfoerder Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$19.99

This rack and pinion bellows kit is precision-engineered and rigorously tested to provide reliable replacement components for the original part on specific vehicles.

Product Features:

Direct replacement – this rack and pinion bellows kit has been reverse-engineered to match the fit and function of the stock part on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$28.49

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$87.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$65.00

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$163.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Loser or worn chassis parts can lead to premature tire wear
Wrench flats on housing provide easy installations and alignment adjustment.
Engineered to meet or exceed OE standards

from

$69.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Thread locking compound included.

from

$62.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA
TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening

from

$84.99

This suspension strut rod is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment strut rod on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Upgrade your 2013 Mercedes-Benz CLS63 AMG with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2013 Mercedes-Benz CLS63 AMG, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Steering and Chassis Parts are key to keeping your CLS63 AMG functioning at its best. At Advance Auto Parts, we offer a wide selection of 21 Steering and Chassis Parts for the 2013 Mercedes-Benz CLS63 AMG, designed to meet your needs without breaking the bank. From Ball Joint replacements to Strut Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2013 Mercedes-Benz CLS63 AMG at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $24.99 to $231.38, with an average price of $69.37. Our 21 Steering and Chassis Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 2013 Mercedes-Benz CLS63 AMG without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2013 Mercedes-Benz CLS63 AMG is always ready to roll. We’re committed to providing you with everything you need to keep your CLS63 AMG in top shape, all in one place. Start shopping confidently below for your 2013 Mercedes-Benz CLS63 AMG!

Best-Selling Ball Joints for 2013 Mercedes-Benz CLS63 AMGs

Enhance the driving experience in your Mercedes-Benz with 2 quality Ball Joint components, starting at $48.50.

show more show less

from

$131.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$48.50

FEBI strictly complies with the specification of the vehicle manufacturers. They make sure that the ball joint exactly fit the corresponding vehicle type.

Product Features:

Original equipment quality
Solutions Made in Germany
Manufacturing expertise
Triple-checking system
Technology leader

Top Picks for 2013 Mercedes-Benz CLS63 AMG Sway Bars

Upgrade Mercedes-Benz CLS63 AMGs with top-quality Sway Bars parts, including 14 OEM and aftermarket selections for your 2013 model.

show more show less

from

$48.49

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$43.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features

from

$165.99

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

from

$63.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$63.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$60.99

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$60.99

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$59.20

Sway Bar Link

from

$49.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$45.49

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$40.05

Sway Bar Link

from

$36.90

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$35.81

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$33.94

Sway Bar Link

In-Demand Tie Rods for 2013 Mercedes-Benz CLS63 AMGs

Select from 2 premium Tie Rods parts for your 2013 Mercedes-Benz CLS63 AMG, with prices ranging from $40.49 to $84.65.

show more show less

from

$84.65

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$40.49

Steering Tie Rod End

Most Sold 2013 Mercedes-Benz CLS63 AMG Power Steering Parts

Explore our best-selling Mercedes-Benz parts for the 2013 CLS63 AMG among 1 OEM and aftermarket options starting from $24.99.

show more show less

from

$24.99

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

FAQs for 2013 Mercedes-Benz CLS63 AMG Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2013 Mercedes-Benz CLS63 AMGs?

Out of 21 Steering and Chassis Parts that fit 2013 Mercedes-Benz CLS63 AMGs, the following parts are the top sellers:

Stabilizer Bar Link (10107041) – $48.49
Stabilizer Bar Link (10107040) – $43.99
Sway Bar Link (12011870) – $59.20

What’s the price range for 2013 Mercedes-Benz CLS63 AMG Steering and Chassis Parts?

Steering and Chassis Part prices for the 2013 Mercedes-Benz CLS63 AMG start at $24.99 and go up to $231.38 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2013 Mercedes-Benz CLS63 AMG?

The average price for Steering and Chassis Parts for the 2013 Mercedes-Benz CLS63 AMG is $69.37. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Mercedes-Benz CLS63 AMG model years?

Yes, we currently carry Steering and Chassis Parts for 7 model years of Mercedes-Benz CLS63 AMGs between 2007 and 2014. Steering and Chassis Parts are bought most frequently for the following model years: 2014, 2012, 2011, 2010, 2009, 2008, and 2007.

What are the cheapest Steering and Chassis Parts for my 2013 Mercedes-Benz CLS63 AMG?

The cheapest 2013 Mercedes-Benz CLS63 AMG Steering and Chassis Parts we carry in stock are:

Steering Rack Boot (20579035) – $24.99
Sway Bar Link (12599230) – $33.94
Sway Bar Link (11583271) – $35.81
Sway Bar Link (11583754) – $36.90
Sway Bar Link (12599049) – $40.05

What types of Steering and Chassis Parts do you sell for my 2013 Mercedes-Benz CLS63 AMG?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2013 Mercedes-Benz CLS63 AMG:

Can I get help with 2013 Mercedes-Benz CLS63 AMG Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Steering and Chassis Parts and more.

What is your return policy for Mercedes-Benz CLS63 AMG Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz CLS63 AMG Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2013 Mercedes-Benz CLS63 AMG Steering and Chassis Parts

TRW – Ball Joint (Part No.L2020935792TRW)

Rare Parts – Ball Joint (Part No.RP12941)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020242060LEM)

Febi – Bilstein Ball Joint (Part No.L2020335348FEB)

Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020466842FEB)

Autopart International Inc – Sway Bar Link (Part No.L10302076753API)

Lemfoerder – Sway Bar Link (Part No.L1030237095LEM)

Autopart International Inc – Sway Bar Link (Part No.L10302017827API)

Rare Parts – Sway Bar Link (Part No.RP19985)

Rare Parts – Sway Bar Link (Part No.RP19990)

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3057)

Lemfoerder – Lemfoerder Steering Rack Boot (Part No.M1010263984LEM)

Rare Parts – R & P Bellows (Part No.RP57378)

Lemfoerder – Lemfoerder Steering Rack Boot (Part No.M1010263976LEM)

Lemfoerder – Steering Rack Boot (Part No.M1010297569LEM)

Dorman – Rack And Pinion Bellows Kit (Part No.532-182)

Driveworks – Tie Rod End (Part No.DW-EV80975)

MOOG – Tie Rod End (Part No.ES800387)

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010303195LEM)

MOOG – Tie Rod End (Part No.ES801366)

Carquest Premium – Tie Rod End (Part No.300-75409)

MOOG – Tie Rod End (Part No.EV80975)

Dorman – Rear Left Upper Front Strut Rod (Part No.524-537)

Rare Parts – Ball Joint (Part No.RP12941)

Febi – Bilstein Ball Joint (Part No.L2020335348FEB)

Dorman – Rear Left Upper Front Strut Rod (Part No.524-537)

MOOG – Stabilizer Bar Link (Part No.K700341)

MOOG – Stabilizer Bar Link (Part No.K700342)

Whiteline – Sway Bar Link (Part No.KLC180-335)

Rare Parts – Sway Bar Link (Part No.RP19985)

Rare Parts – Sway Bar Link (Part No.RP19990)

Beck/Arnley – Stabilizer End Link (Part No.101-7113)

Beck/Arnley – Stabilizer End Link (Part No.101-7114)

Delphi – Sway Bar Link (Part No.L1030341827DEL)

Rare Parts – Sway Bar Link (Part No.RP19491)

Rare Parts – Sway Bar Link (Part No.RP19492)

Autopart International Inc – Sway Bar Link (Part No.L10301938036API)

Lemfoerder – Sway Bar Link (Part No.L1030296564LEM)

Lemfoerder – Sway Bar Link (Part No.L1030296563LEM)

Autopart International Inc – Sway Bar Link (Part No.L10301937275API)

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010526195LEM)

MOOG – Steering Tie Rod End (Part No.EV801429)

Beck/Arnley – Steering Rack Boot (Part No.103-2906)