2013 Land Rover Range Rover Evoque Oil and Lubricants
Find Your Specific 2013 Land Rover Range Rover Evoque Oil and Lubricants
Below you will find various in-demand Land Rover Oil and Lubricants, components and accessories for your 2013 Range Rover Evoque. Advance Auto Parts has popular Range Rover Evoque parts like Lubricants, Motor Oils, Greases and more. You’ll also find aftermarket and OEM Oil and Lubricants for other Range Rover Evoque model years including
2012,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 2013 Land Rover Range Rover Evoque Oil and Lubricants below and start saving instantly.
Popular 2013 Land Rover Range Rover Evoque Oil and Lubricants Categories
Essential Oil and Lubricants for 2013 Land Rover Range Rover Evoques
Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)
from
$18.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.
Product Features:
See More
Product Features:
- FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)
from
$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.
Product Features:
See More
Product Features:
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
- MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
FRAM – 5W-30 Full Synthetic Motor Oil: 1 Quart (Part No.F930)
from
$7.49
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
- Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
FRAM – 5W-30 Conventional Motor Oil with Low-Speed Pre-Ignition Control, 1 Quart (Part No.F620)
from
$6.49
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
FRAM – 0W-20 Full Synthetic Motor Oil, Faster Oil Flow, 1 Quart (Part No.F900)
from
$7.49
FRAM Engine Oil Full Synthetic SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 0W-20 and is a fully licensed GM dexos1 Gen 2 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability, Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 0W-20 is formulated with high-quality synthetic base stocks and the latest additive technology to meet stringent API and ILSAC specifications, ensuring top-tier protection for your engine.
- Advanced LSPI Prevention: Specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, reducing the risk of premature engine failure.
- Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, offering broad application across various engine types.
- GM dexos1 Gen 2 Licensed: Fully licensed as GM dexos1 Gen 2 motor oil, ensuring it meets the high standards required for modern engines, including those from General Motors.
FRAM – Full Synthetic 0W20 Engine Oil – Helps Extend Engine Life – 5 Qt (Part No.F900-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 0W-20 and is a fully licensed GM dexos1 Gen 2 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability, lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Ultimate engine protection: FRAM Full Synthetic 0W20 5 QT is specifically formulated to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine.
FRAM – 5W-30 Full Synthetic Motor Oil: 5 Quart (Part No.F930-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
- Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)
from
$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
FRAM – 0W-20 High Mileage Full Synthetic Motor Oil: 1 Quart (Part No.F913)
from
$7.99
FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
FRAM – 5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption (Part No.F660-5QT)
from
$25.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
Valvoline – European Vehicle 5W-30 Full Synthetic Motor Oil, 5 Gallon (Part No.881058)
from
$154.99
Valvoline European Vehicle Full Synthetic motor oil is specially formulated to provide the ultimate protection for European gas and diesel engines. Through its advanced formulation, Valvoline European Vehicle Full Synthetic provides extra detergents and dispersants that provide maximum sludge and deposit protection, along with premium additives that hold up to high temperatures and resist motor oil breakdown under severe driving conditions. Approved/ Licensed for most European applications including VW, BMW, Mercedes-Benz, Audi and Porsche vehicles.
Product Features:
See More
Product Features:
- Full synthetic formula for exceptional high and low temperature protection
- Extra wear protection designed to keep engine parts like new
- Extra detergents fight sludge and deposits that reduce engine life
- American Owned and Operated
FRAM – Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart (Part No.F933)
from
$7.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
- Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
- Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
FRAM – Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart (Part No.F933-5QT)
from
$28.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
FRAM – High Milage Conventional 5W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (Part No.F660)
from
$6.49
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
FRAM – Full Synthetic High Mileage 0W-20 Engine Oil: 5 Quart (Part No.F913-5QT)
from
$28.99
FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart (Part No.VV831)
from
$12.49
Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.
Product Features:
See More
Product Features:
- Formulated for reliable gear protection
- Protects against severe temperatures to help extend service life
- Formulated with extreme-pressure additives to minimize gear wear from shock loads
- Helps protect against gear wear from scuffing, scouring, corrosion and pitting
- Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
- PLEASE NOTE: Valvoline recommends SynPower Full Synthetic Gear Oil for limited slip differentials
Upgrade your 2013 Land Rover Range Rover Evoque with Top-Quality Oil and Lubricants
When it comes to maintaining or upgrading your 2013 Land Rover Range Rover Evoque, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Land Rover or enhancing its overall performance, Oil and Lubricants are key to keeping your Range Rover Evoque functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Oil and Lubricants for the 2013 Land Rover Range Rover Evoque, designed to meet your needs without breaking the bank.
From
Lubricant
replacements to
Motor Oil
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Oil and Lubricants for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Oil and Lubricants for your 2013 Land Rover Range Rover Evoque at great prices.
Our Oil and Lubricants inventory for this model
ranges from just $6.49 to $154.99, with
an average price of $31.99.
Our 12 Oil and Lubricants in stock come from 2 trusted brands, so you’re sure to find the right part for your 2013 Land Rover Range Rover Evoque without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Land Rover Range Rover Evoque, we stock popular OEM and aftermarket Oil and Lubricants from top names
like Valvoline, and more.
Valvoline Oil and Lubricants
start at just $12.49 and boast an impressive 5 stars average rating from customers.
With 1,797 customer reviews and counting, our 2013 Land Rover Range Rover Evoque Oil and Lubricants have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Oil and Lubricant upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 2013 Land Rover Range Rover Evoque is always ready to roll. We’re committed to providing you with everything you need to keep your Range Rover Evoque in top shape, all in one place.
Start shopping confidently below for your 2013 Land Rover Range Rover Evoque!
Best-Selling Lubricants for 2013 Land Rover Range Rover Evoques
Enhance the driving experience in your Land Rover with 1 quality Lubricant components, starting at $12.49.
Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart (Part No.VV831)
from
$12.49
Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.
Product Features:
See More
Product Features:
- Formulated for reliable gear protection
- Protects against severe temperatures to help extend service life
- Formulated with extreme-pressure additives to minimize gear wear from shock loads
- Helps protect against gear wear from scuffing, scouring, corrosion and pitting
- Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
- PLEASE NOTE: Valvoline recommends SynPower Full Synthetic Gear Oil for limited slip differentials
Most Popular 2013 Land Rover Range Rover Evoque Motor Oils
Customize your Land Rover with 9 Motor Oil products
like Engine Oil, all
priced under $154.99.
FRAM – 5W-30 Full Synthetic Motor Oil: 5 Quart (Part No.F930-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
- Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)
from
$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
FRAM – Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart (Part No.F933-5QT)
from
$28.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
FRAM – 5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption (Part No.F660-5QT)
from
$25.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
FRAM – 5W-30 Full Synthetic Motor Oil: 1 Quart (Part No.F930)
from
$7.49
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
- Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
FRAM – 5W-30 Conventional Motor Oil with Low-Speed Pre-Ignition Control, 1 Quart (Part No.F620)
from
$6.49
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
FRAM – High Milage Conventional 5W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (Part No.F660)
from
$6.49
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
FRAM – Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart (Part No.F933)
from
$7.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
- Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
- Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
Valvoline – European Vehicle 5W-30 Full Synthetic Motor Oil, 5 Gallon (Part No.881058)
from
$154.99
Valvoline European Vehicle Full Synthetic motor oil is specially formulated to provide the ultimate protection for European gas and diesel engines. Through its advanced formulation, Valvoline European Vehicle Full Synthetic provides extra detergents and dispersants that provide maximum sludge and deposit protection, along with premium additives that hold up to high temperatures and resist motor oil breakdown under severe driving conditions. Approved/ Licensed for most European applications including VW, BMW, Mercedes-Benz, Audi and Porsche vehicles.
Product Features:
See More
Product Features:
- Full synthetic formula for exceptional high and low temperature protection
- Extra wear protection designed to keep engine parts like new
- Extra detergents fight sludge and deposits that reduce engine life
- American Owned and Operated
Top Picks for 2013 Land Rover Range Rover Evoque Greases
Upgrade Land Rover Range Rover Evoques with top-quality Greases parts, including 2 OEM and aftermarket selections for your 2013 model.
Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)
from
$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.
Product Features:
See More
Product Features:
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
- MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)
from
$18.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.
Product Features:
See More
Product Features:
- FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
- MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
Top-Rated Oil and Lubricants Brands For Your 2013 Land Rover Range Rover Evoque
Shop for the best-rated brands offering Oil and Lubricants and other products for your 2013 Land Rover Range Rover Evoques. Below you’ll find some of our best rated Oil and Lubricants from Valvoline, and more. Oil and Lubricants from these brands that fit a 2013 Range Rover Evoque start at just $12.49 and are rated as high as 5 stars. OEM and aftermarket Oil and Lubricants don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 2013 Land Rover Range Rover Evoque Oil and Lubricants
When it comes to maintaining or upgrading your 2013 Land Rover Range Rover Evoque, using quality Oil and Lubricants is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Oil and Lubricants, specifically designed for the 2013 Land Rover Range Rover Evoque. With over 4 Valvoline brand Oil and Lubricants in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.49, with an average price of just $61.62. Plus, with over 599 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Oil and Lubricants will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$18.99
$18.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart
“”
from
$12.49
$12.49
(235)
High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart
“ok”
FAQs for 2013 Land Rover Range Rover Evoque Oil and Lubricants
Which Oil and Lubricants are best-sellers for 2013 Land Rover Range Rover Evoques?
Out of 12 Oil and Lubricants that fit 2013 Land Rover Range Rover Evoques, the following parts are the top sellers:
- 5W-30 Full Synthetic Motor Oil: 5 Quart (12260437) – $27.99
- 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (12260454) – $25.99
- Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart (12260431) – $28.99
What’s the price range for 2013 Land Rover Range Rover Evoque Oil and Lubricants?
Oil and Lubricant prices for the 2013 Land Rover Range Rover Evoque start at $6.49 and go up to $154.99 for the most premium parts.
What’s the average price of a Oil and Lubricant for a 2013 Land Rover Range Rover Evoque?
The average price for Oil and Lubricants for the 2013 Land Rover Range Rover Evoque is $31.99. Keep in mind the variety of part types within our Oil and Lubricant category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Oil and Lubricants for other Land Rover Range Rover Evoque model years?
What are the cheapest Oil and Lubricants for my 2013 Land Rover Range Rover Evoque?
The cheapest 2013 Land Rover Range Rover Evoque Oil and Lubricants we carry in stock are:
- 5W-30 Conventional Motor Oil with Low-Speed Pre-Ignition Control, 1 Quart (12260426) – $6.49
- High Milage Conventional 5W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (12260455) – $6.49
- 5W-30 Full Synthetic Motor Oil: 1 Quart (12260451) – $7.49
- Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart (12260539) – $7.99
- High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart (7070003) – $12.49
What are the top-rated Oil and Lubricants that fit the 2013 Land Rover Range Rover Evoque?
Out of 1,797 reviews by customers, our 2013 Land Rover Range Rover Evoque Oil and Lubricants have an average customer rating of . These are some of the highest-rated Oil and Lubricant types for the 2013 Land Rover Range Rover Evoque and their top-rated products:
- Lubricants
- Greases
What types of Oil and Lubricants do you sell for my 2013 Land Rover Range Rover Evoque?
As of 2/5/25, these are some of the most in-demand types of Oil and Lubricants for a 2013 Land Rover Range Rover Evoque:
Can I get help with 2013 Land Rover Range Rover Evoque Oil and Lubricant orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Land Rover Oil and Lubricants and more.
What is your return policy for Land Rover Range Rover Evoque Oil and Lubricants?
Advance Auto Parts keeps returns simple. For new Land Rover Range Rover Evoque Oil and Lubricants and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
