2013 Kia Rio Power Steering Parts
More 2013 Kia Rio Power Steering Parts
Find your specific 2013 Kia Rio original or aftermarket Power Steering Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2013 Kia Rio Power Steering Parts
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Carquest Premium – Pressure Hose Assembly (Part No.40192)
from
$63.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
Carquest Premium – Pressure Hose Assembly (Part No.37692)
from
$147.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
Carquest Premium – Pressure Tube Assembly (Part No.40193)
from
$69.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
Rare Parts – R & P BELLOWS (Part No.RP57353)
from
$34.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
MOOG – Rack & Pinion Bellows Kit (Part No.K150282)
from
$28.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
EMPI – Steering Rack Boot Kit (Part No.M1030165841EMP)
from
$19.29
Steering Rack Boot Kit
MOOG – Rack & Pinion Bellows Kit (Part No.K8581)
from
$28.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
EMPI – re Steering Rack Boot (Part No.M1010186453EMP)
from
$15.89
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
EMPI/Empire – Steering Rack Boot K (Part No.M1030568878EMP)
from
$20.91
Steering Rack Boot K
Maval – Complete Steering Rack, Remanufactured (Part No.M1000422140MAV)
from
$372.29
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.
Product Features:
See More
Product Features:
- OE quality and direct fit replacement
- Remanufacture based on highest quality standards
- Computerized tests insure that all products meet the OE performance specification.
- Performance and quality approvals from OE steering gear and pump manufacturers world wide
- Installation Notes: Steering system must be completely flushed before installing a new steering rack. Please refer to the vehicles steering fluid requirements (usually located in the engine compartment) before flushing or replacing the power steering flui
Cardone – Rack and Pinion Assembly (Part No.26-2402)
from
$313.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Rack and Pinion Assembly (Part No.26-2423)
from
$296.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Rack and Pinion Assembly (Part No.24-2695)
from
$262.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Rack and Pinion Assembly (Part No.1G-2405)
from
$345.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Popular 2013 Kia Rio Power Steering Parts Categories
2013 Kia Rio Power Steering Parts
Maybe you’re in the middle of a full rebuild of that 2013 Kia Rio. Maybe you just need a couple of Power Steering Parts. Either way, Advance Auto Parts has 7 different Power Steering Parts in our inventory ranging from $11.49 to $345.99. That means you can find the exact parts or products you need to keep that 2013 Kia Rio running smoothly.
Power Steering Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2013 Kia Rio. Imperial, Cardone, and EMPI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Power Steering Parts for your 2013 Kia Rio, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Power Steering Parts to keep your 2013 Kia Rio rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Power Steering Parts Brands To Make Your 2013 Kia Rio Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2013 Kia Rio demands trusted brand parts and products to keep it running. Many trusted brands of Power Steering Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Rio the best it can be. Be sure to browse some of our top Power Steering Parts brands and parts.
Popular Imperial Power Steering Parts
We carry Imperial parts in our stock across Power Steering Coolers and Power Steering Pressure Hoses categories, plus more. For a 2013 Kia Rio, our most popular Imperial Power Steering Parts include:
Top 2013 Kia Rio Power Steering Parts from Imperial
Imperial products are another trusted brand when it comes to Power Steering Parts for your 2013 Kia Rio. Popular Imperial parts include:
FAQs for 2013 Kia Rio Power Steering Parts
What are the most purchased Power Steering Parts for the 2013 Kia Rio?
Out of 7 Power Steering Parts for the 2013 Kia Rio, the most popular in our inventory are:
