2013 Jeep Wrangler Performance and Racing Products
Find Your Specific 2013 Jeep Wrangler Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 2013 Wrangler. Advance Auto Parts has popular Wrangler parts like Performance Mufflers, Performance Oil Filters, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Wrangler model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2013 Jeep Wrangler Performance and Racing Products below and start saving instantly.
Popular 2013 Jeep Wrangler Performance and Racing Products Categories
Essential Performance and Racing Products for 2013 Jeep Wranglers
aFe POWER – aFe POWER SCORCHER GT PLUS Plug and Play Power Module with Remote, 77-46208 (Part No.77-46208)
from
$462.99
The aFe POWER SCORCHER GT PLUS is a plug and play power module that is a simple upgrade providing instant performance gains and enhanced drivability at the press of a button. Combining the advantages of our Scorcher power modules with a built-in throttle enhancer, the SCORCHER GT PLUS is your ticket to a finely tuned driving experience. With this all-in-one unit, your performance gains won’t be dulled by a lazy throttle pedal that all newer vehicles are plagued with from the factory due to the drive-by-wire system. Equipped with four distinct power settings, each paired with a corresponding throttle configuration, the SCORCHER GT PLUS Power Module gives you the ability to fine tune your vehicle’s performance. Whether you’re cruising in Sport mode or tapping into your vehicle’s full potential in Race Mode, the in-cabin switch offers seamless control, making your vehicle’s performance truly tailored to the driving conditions and your driving style. Utilizing OE-style connectors, the SCORCHER GT PLUS offers plug-and-play installation by simply plugging into your vehicles’ corresponding sensors and gas pedal. The installation does not require splicing wires or any modification of the vehicle’s electrical system, keeping all factory connections intact. Installation can be easily reversed in minutes should the module need to be removed. The included LED controller mounts in the cabin for easy on-the-fly selection of the four distinct power settings and their corresponding throttle configuration, Stock (Green), Sport (Yellow), Sport+ (Orange), Race (Red). aFe SCORCHER GT PLUS modules uses a high quality enclosed casing and factory style connectors which requires no modification to your factory harness. These factory style connectors plug directly into the stock wiring harness connectors and sensors.
See More
Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5102G (Part No.2.5102G)
from
$27.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More
Energy Suspension – Energy Suspension Body Cab Mount Set, 2.4105G (Part No.2.4105G)
from
$121.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
See More
Dynomax – Dynomax Exhaust Tail Pipe 2.5 Inch Inlet OD 2.5 Inch Outlet OD, 55428 (Part No.55428)
from
$121.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
See More
Energy Suspension – Energy Suspension Track Arm Bushing Set, 2.7103R (Part No.2.7103R)
from
$24.99
Energy Suspension continues to be the World leader in performance polyurethane suspension technology. Dedication to manufacturing and developing superior products has established Energy Suspension as the most asked-for name in performance polyurethane components today. The complex and diverse nature of Energy’s proprietary Hyper-Flex material requires constant attention to developing the optimum polyurethane formulas. This devotion has produced the quality components that our customers continue to demand. Providing problem-solving solutions with applications for the most popular vehicles, paired with our Limited warranty and superb customer support, Energy Suspension is your first quality choice in performance polyurethane suspension components.
See More
Energy Suspension – Energy Suspension Control Arm Bump Stop Set, 2.9101G (Part No.2.9101G)
from
$41.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. The low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
See More
Energy Suspension – Energy Suspension Control Arm Bushing Set, 2.3107G (Part No.2.3107G)
from
$126.99
For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy’s Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.
See More
Rancho – Rancho Rs5000 Steering Damper, RS5405 (Part No.RS5405)
from
$91.99
Ideal for off-road driving, towing and street applications, Rancho RS5000 steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration. Features a protective boot to safeguard shock rod and oil seal to enhance durability.
See More
SCT Performance – SCT Performance Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges, 40490 (Part No.40490)
from
$399.99
The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.
See More
Dynomax – Dynomax Exhaust Pipe 2.5 Inch Inlet ID 2.5 Inch Outlet OD, 52515 (Part No.52515)
from
$39.49
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
See More
Yukon Gear – Yukon Gear 1310 To 1330 Adapter U/Joint, 42005 (Part No.42005)
from
$59.99
“Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″” span and 1.062″” caps. The 1330 side has a 3.625″” span and 1.062″” caps. Both sides are outside snap ring.”
See More
MagnaFlow – MagnaFlow Rock Crawler Series Cat-Back Performance Exhaust System, 15236 (Part No.15236)
from
$689.99
The MagnaFlow Rock Crawler Series Cat-Back Performance Exhaust System 15236 brings superior boulder-climbing capabilities to your 3.6L Jeep with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 15236 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 15236’s emissions-legal cat-back design replaces all your rig’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 15236 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.
See More
Energy Suspension – Energy Suspension Hyper-Flex Master Set, 2.18108G (Part No.2.18108G)
from
$859.99
Energy’s Hyper-Flex is superior performance polyurethane which has proven itself under the most demanding conditions on the race track, off-road and street performance driving, Hyper-Flex components do not wear or deteriorate from exposure to undercar chemicals such as oils and coolants and withstand atmospheric conditions like UV exposure and pollutants. Impervious to these elements, Energy’s Hyper-Flex components are a great value. Not only will it outlast rubber 5 to 1 but are a cost effective performance improvement for your car or truck. Whether domestic or import, front, rear or 4WD, old or new, your vehicle will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane components. All Hyper-Flex components are proudly Made in America and are available in red or black.
See More
MagnaFlow – MagnaFlow Competition Series Cat-Back Performance Exhaust System, 15118 (Part No.15118)
from
$827.99
The MagnaFlow Competition Series Cat-Back Performance Exhaust System 15118 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.6L Jeep with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.5in. Satin Welded-On Single Wall Angle Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15118 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15118’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
See More
Dynomax – Dynomax Ultra Flo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID, 17289 (Part No.17289)
from
$225.99
DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our excl usive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo SS Polished mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.
See More
Flowmaster Inc. – Flowmaster Inc. 60 Delta Flow Muffler – 2.25 Center In – 2.25 Offset Out – Mild Sound, 952462 (Part No.952462)
from
$199.99
The 60 series incorporates Flowmaster’s Delta Flow technology to produce a mellow tone, improved power and throttle response on smaller displacement 4 and 6 cylinder vehicles. Generally suited to rear mount installations, use of larger diameter tailpipe/tip will create a deeper tone that is evident both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
B & M – B & M Shifter Accessory, Shifter Stick , 07-17 Wrangler, 46200 (Part No.46200)
from
$291.99
“This B&M shift stick assembly is designed specifically for all 2007-2018 Jeep Wrangler JK models with 6 speed manual transmissions and can be used as either a direct-replacement of the factory shift stick, or as the finishing touch when used with our JK Precision SportShifter part #45195. The stick is constructed from high strength 4340 nickel-chromoly steel and features improved bends that provide better shifting leverage and comfort than the factory stick. The stock Jeep shift handle has a thick and soft rubber isolator between the shifter and the stick that reduces transmission noise inside of the Jeep, but degrades over time and results in a very “”mushy”” feel. Our Precision stick features a billet aluminum block with four replaceable rubber o-rings that provide isolation from transmission gear noise and also result in shorter, noticeably firmer and more positive shifts. The shift handle is finished off with a durable black e-coat and topped with a black round B&M logo shift knob showing that you take off-road performance seriously. The stick features a 3/8 x 16 thread pattern so you can also customize the look of your shifter with other styles and colors of shift knobs. Note: Fits the stock shifter and B&M SportShifter #45195.”
See More
K&N – K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2364 (Part No.33-2364)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
See More
K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2004 (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N Limited Warranty.
See More
K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-1002 (Part No.HP-1002)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N Limited Warranty.
See More
Disc Brakes Australia – Disc Brakes Australia T3 4000 Series, DBA42537S (Part No.DBA42537S)
Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5111G (Part No.2.5111G)
from
$34.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More
Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5107G (Part No.2.5107G)
from
$25.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More
Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5110R (Part No.2.5110R)
from
$34.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More
aFe POWER – aFe POWER Magnum FORCE Cold Air Intake: Gain up to 21 Horsepower! Oiled Air Filter For Maximum Airflow, 75-13002-B (Part No.75-13002-B)
from
$419.99
“This intake system utilizes an oil free, 7-1/2″” tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive cotton media with 2-layers of non-woven synthetic media providing 99.7% cumulative efficiency for maximum filtration. (US PAT 06811588). One Piece 3″” Mandrel-Bent aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque. Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses fac tory mounting locations for fast and easy installation. All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.”
See More
K&N – K&N Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter, 71-1566 (Part No.71-1566)
from
$524.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.
See More
aFe POWER – aFe POWER Momentum GT Cold Air Intake: Gain up to 47% More Airflow With Dry Air Filter For Easy Maintenance, 50-70035D (Part No.50-70035D)
from
$419.99
Unique One-Piece High Quality Housing w/ Sight Window:A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made of heat soak resistant cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection.
See More
K&N – K&N NextGen Cold Air Intake: Adds Up To 21.3 Horsepower, With Washable Air Filter, 50-1566 (Part No.50-1566)
from
$449.99
This K&N NextGen cold air intake system is engineered for Jeep Wrangler V6 3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 46.7% to your engine and provides an increase of 21.34 horsepower and 25.2 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
See More
Upgrade your 2013 Jeep Wrangler with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2013 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 44 Performance and Racing Products for the 2013 Jeep Wrangler, designed to meet your needs without breaking the bank.
From
Performance Muffler
replacements to
Performance Oil Filters
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2013 Jeep Wrangler at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $17.99 to $893.99, with
an average price of $299.56.
Our 44 Performance and Racing Products in stock come from 16 trusted brands, so you’re sure to find the right part for your 2013 Jeep Wrangler without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Jeep Wrangler, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N MagnaFlow, and more.
K&N Performance and Racing Products
start at just $17.99 and boast an impressive 4.8 stars average rating from customers.
With 315 customer reviews and counting, our 2013 Jeep Wrangler Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2013 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place.
Start shopping confidently below for your 2013 Jeep Wrangler!
Best-Selling Performance Mufflers for 2013 Jeep Wranglers
Enhance the driving experience in your Jeep with 3 quality Performance Muffler components, starting at $204.99.
Dynomax – Dynomax Super Turbo Exhaust Muffler Assembly 2.5 Inch Inlet ID 2.5 Inch Outlet OD, 53804 (Part No.53804)
from
$213.99
Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted i nterior resonance, while maintaining a mellow performance tone.
See More
MagnaFlow – MagnaFlow Rock Crawler Series Cat-Back Performance Exhaust System, 15236 (Part No.15236)
from
$689.99
The MagnaFlow Rock Crawler Series Cat-Back Performance Exhaust System 15236 brings superior boulder-climbing capabilities to your 3.6L Jeep with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 15236 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 15236’s emissions-legal cat-back design replaces all your rig’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 15236 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.
See More
Flowmaster Inc. – Flowmaster Inc. Super 50 Muffler – 2.50 Offset In – 2.50 Center Out – Moderate Sound, 52556 (Part No.52556)
from
$204.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Most Popular 2013 Jeep Wrangler Performance Oil Filters
Customize your Jeep with 1 Performance Oil Filters products
like Performance Oil Filters, all
priced under $17.99.
K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-7025 (Part No.HP-7025)
from
$17.99
K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer’s recommended service intervals.
See More
Top Picks for 2013 Jeep Wrangler Performance Exhaust Products
Upgrade Jeep Wranglers with top-quality Performance Exhaust Products parts, including 9 OEM and aftermarket selections for your 2013 model.
MagnaFlow – MagnaFlow Street Series Axle Back Performance Exhaust System, 15160 (Part No.15160)
from
$893.99
The MagnaFlow Street Series Axle-Back Performance Exhaust System 15160 15160 brings enhanced engine sound and dyno-proven performance to your 3.6L, 3.8L Jeep with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15160 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
See More
MagnaFlow – MagnaFlow Competition Series Cat-Back Performance Exhaust System, 15118 (Part No.15118)
from
$827.99
The MagnaFlow Competition Series Cat-Back Performance Exhaust System 15118 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.6L Jeep with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.5in. Satin Welded-On Single Wall Angle Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15118 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15118’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
See More
Dynomax – Dynomax Exhaust Tail Pipe 2.5 Inch Inlet OD 2.5 Inch Outlet OD, 55428 (Part No.55428)
from
$121.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
See More
Dynomax – Dynomax Exhaust Pipe Spout 2.5 Inch Inlet ID 3 Inch Outlet OD, 36486 (Part No.36486)
from
$54.99
Customize your exhaust system with a DynoMax stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.
See More
Dynomax – Dynomax Exhaust Pipe 2.5 Inch Inlet ID 2.5 Inch Outlet OD, 52515 (Part No.52515)
from
$39.49
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
See More
MagnaFlow – MagnaFlow Competition Series Cat-Back Performance Exhaust System, 15117 (Part No.15117)
from
$751.99
The MagnaFlow Competition Series Cat-Back Performance Exhaust System 15117 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.6L Jeep with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.5in. Satin Welded-On Single Wall Angle Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15117 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15117’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
See More
MagnaFlow – MagnaFlow Street Series Axle Back Performance Exhaust System, 15178 (Part No.15178)
from
$699.99
The MagnaFlow Street Series Axle-Back Performance Exhaust System 15178 brings enhanced engine sound and dyno-proven performance to your 3.6L, 3.8L Jeep with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15178 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
See More
MagnaFlow – MagnaFlow 45 degrees Bend Performance Exhaust Pipe 2 in, 15313 (Part No.15313)
from
$144.99
The MagnaFlow Jeep Loop Delete 15313 is a 2in. diameter mandrel bent stainless steel pipe that i’s weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
See More
Dynomax – Dynomax Exhaust Pipe 2 Inch Inlet ID 2 Inch Outlet ID, 52512 (Part No.52512)
from
$59.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
See More
In-Demand Performance Ignition Products for 2013 Jeep Wranglers
Select from 1 premium Performance Ignition Products parts for your 2013 Jeep Wrangler.
aFe POWER – aFe POWER SCORCHER GT Plug and Play Power Module with Remote, 77-46205 (Part No.77-46205)
from
$387.99
A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Power Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increase turbo boost.
See More
Most Sold 2013 Jeep Wrangler Performance Air Filters
Explore our best-selling Jeep parts for the 2013 Wrangler among 1 OEM and aftermarket options starting from $68.99.
K&N – K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2364 (Part No.33-2364)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
See More
Top-Rated Performance and Racing Products Brands For Your 2013 Jeep Wrangler
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2013 Jeep Wranglers. Below you’ll find some of our best rated Performance and Racing Products from K&N and MagnaFlow, and more. Performance and Racing Products from these brands that fit a 2013 Wrangler start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2013 Jeep Wrangler Performance and Racing Products
When it comes to maintaining or upgrading your 2013 Jeep Wrangler, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2013 Jeep Wrangler. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $186.66. Plus, with over 36 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$17.99
(3)
K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-7025
“5 Star Review”
from
$68.99
(31)
K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, 33-2364
“A must have product! This is my third car with K&N replacement air filter. Direct fit, less waste and cost savings. Love it!”
from
$472.99
(2)
K&N Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter, 77-1566KP
“Great product and immediate effects! Easy to install and sounds good under the hood. Good buy and great price from K&N!”
Popular MagnaFlow 2013 Jeep Wrangler Performance and Racing Products
MagnaFlow auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2013 Jeep Wrangler owner should feel confident when installing genuine MagnaFlow parts in their vehicle. To ensure the best fit and performance for your 2013 Wrangler, Advance Auto Parts carries a full inventory of 1 MagnaFlow Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these MagnaFlow Performance and Racing Products range up to $893.99, plus, with more than 1 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$893.99
(1)
MagnaFlow Street Series Axle Back Performance Exhaust System, 15160
“Exact match for 1987 1.3L non-turbo rotary rx-7 w auto sensing suspension. 4 port master w 2 prong low level switch.”
FAQs for 2013 Jeep Wrangler Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2013 Jeep Wranglers?
Out of 44 Performance and Racing Products that fit 2013 Jeep Wranglers, the following parts are the top sellers:
- Bully Dog Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device, 40417 (11051146) – $399.99
- Rancho Rs5000 Steering Damper, RS5405 (18580291) – $91.99
- SCT Performance Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges, 40490 (11907375) – $399.99
What’s the price range for 2013 Jeep Wrangler Performance and Racing Products?
Performance and Racing Product prices for the 2013 Jeep Wrangler start at $17.99 and go up to $893.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2013 Jeep Wrangler?
The average price for Performance and Racing Products for the 2013 Jeep Wrangler is $299.56. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Wrangler model years?
What are the cheapest Performance and Racing Products for my 2013 Jeep Wrangler?
The cheapest 2013 Jeep Wrangler Performance and Racing Products we carry in stock are:
- K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-7025 (12015844) – $17.99
- Dynomax Exhaust Pipe 2.5 Inch Inlet ID 2.5 Inch Outlet OD, 52515 (11693776) – $39.49
- Energy Suspension Sway Bar Bushing Set – 31 mm, 2.5112G (10600210) – $40.99
- Energy Suspension Sway Bar Bushing Set – 19 mm, 2.5113R (10600161) – $41.49
- Energy Suspension Sway Bar Bushing Set – 19 mm, 2.5113G (10600196) – $41.49
What are the top-rated Performance and Racing Products that fit the 2013 Jeep Wrangler?
Out of 315 reviews by customers, our 2013 Jeep Wrangler Performance and Racing Products have an average customer rating of 4.1. These are some of the highest-rated Performance and Racing Product types for the 2013 Jeep Wrangler and their top-rated products:
- Performance Oil Filters
- Performance Air Filters
What types of Performance and Racing Products do you sell for my 2013 Jeep Wrangler?
As of 9/14/26, these are some of the most in-demand types of Performance and Racing Products for a 2013 Jeep Wrangler:
Can I get help with 2013 Jeep Wrangler Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Wrangler Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Wrangler Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
