2013 Jeep Wrangler Bumpers

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

New Standard Replacement Front Bumper Cover Molding [Applique] Prime/Paint To Match Finish

Product Features:

• Made Of Olefinic Thermoplastic Elastomer
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The XHD Aluminum Bumper System was designed for a whole new look while being extremely lightweight. The bumper is all aluminum but uses the current steel XHD D-rings and comes with a built in top filler plate.

Product Features:

• Aluminum
• Front

New Standard Replacement Driver Side Front Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

New Standard Replacement Front Bumper To Body Filler Panel, Plastic [Upper Cover]

Product Features:

• Plastic [Upper Cover], Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This pair of galvanized 3/4-inch D-shackles from Rugged Ridge is rated to 9,500 lbs. and provides everything you’ll need for recovering stuck Jeeps.

Product Features:

• Silver with Red Pin
• 9500Lb Pull Capacity
• Galvanized Steel
• Pair
• 3/4 in.

D-Ring Shackle; 3/4 inch; 9500 Lb; Galvanized

Bumper Kit; Rear; 97-06 Jeep Wrangler TJ/LJ

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring a winch and shackle rating of 12,500 lbs. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch and shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070 and roller fairlead #2156071. For added winch protection and an aggressive look on the Jeep Wrangler JL or Jeep Gladiator, this bumper is also compatible with the stinger-style angular brush guard #2156050 (not included). The TrailCrusher bumper is fast and easy to install, integrating with the Jeep JL or Gladiator like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear TrailCrusher bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation (see application info to verify fitment with your Jeep).

Product Features:

• Winch and shackle ratings of 12,500 lbs. for ultimate off-road functionality
• Standard winch mounting platform accepts most types of winches
• Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
• Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
• No-drill install uses factory mounting points with no pump relocation required
• One-piece construction with 3/16″ thick, all-steel plates for maximum strength
• Narrow width and high ground clearance for an improved off-road-style design
• Highly durable carbide black powder coat with rust-resistant E-coat finish
• Accepts angular brush guard #2156050 for added winch protection
• Center round cutouts accept OE bumper lights
• Includes mounting hardware and 3/8″ thick brackets for solid installation

Looking to add some versatility and style to your Wrangler? No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles so you can build the exact bumper of your choice!

Product Features:

• Textured Black
• Added Protection
• Modular Design
• Bolt-on
• Limited 5 Year Warranty

The stubby ends from Rugged Ridge feature a tough off road look while providing greater tire clearance for lifted Jeeps. The beefy black powder coated steel end caps extend out to the edge of the grille to offer protection, but leaves the wheel wells open.

Product Features:

• Textured Black
• Added Protection
• Modular Design
• Bolt-on

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Product Features:

• Made Of High Strength Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Limited 12 Month Or 12,000 Mile Warranty

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1997-2006 Wrangler, 2004-2006 Wrangler Unlimited, Bumper Extension Screw, Front or Rear (4 Required Per Extension)

Is your front bumper cover scratched up or damaged? Omix-ADA offers high-quality replacements that will restore the original look to your Jeep. Why paint your old bumper cover when you can start with a new one?

Product Features:

• Black
• OE Style
• Direct Fit
• Plastic

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Are you looking for protection or Rugged Ridge D rings? This pair of European styled XHD bumper tow point covers feature a hard-wearing injection molded plastic design that matches the factory one for an overall integrated look. For use with 11540.10 and

Product Features:

• Textured Black
• European Style
• Easily Removable
• Limited 5 Year Warranty

Spartacus Front Bump

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Westin(TM) MAX(TM) Winch Mounting Systems are made to maximize your options for functional style. The MAX(TM) Winch Tray is suitable for the mounting of most major brand winches. The MAX(TM) System gives you the option of adding a MAX(TM) Bull Bar/Light B

Product Features:

• Features 3 in. Tube
• Accommodates Three 8 in. Lights
• No Drill Installation
• Winch Tray Sold Separately
• 3 Year Warranty

All Rugged Ridge bumpers feature smooth ground welds for an unbelievable look and further rust protection. No other tubular bumper manufacturer goes to the expense of smooth grinding their welds.

Product Features:

• Textured Black
• Allows Oversized Spare Tire
• Welded End Caps

All Rugged Ridge bumpers feature smooth ground welds for an unbelievable look and further rust protection. No other tubular bumper manufacturer goes to the expense of smooth grinding their welds.

Product Features:

• Gloss Black
• Allows Oversized Spare Tire
• Welded End Caps

Westins WJ2 Rear Bumper is constructed with 3/16-inch plate steel and features 2 off-road jack mount points. This clean, stylish bumper is designed to work with factory or Westin hitches. Our WJ2 Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Bolt on installation so no drilling is required. Includes bumper, mounting hardware and install instructions.

Product Features:

• 3/16-Inch Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points
• Rock Light Mount Points
• 2 Off-Road Jack Points
• No Drilling Required – Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Product Features:

• Available in blind, push-in and screw-in styles
• Constructed of high-quality materials for long-lasting durability
• Also suitable for a broad variety of industrial and commercial uses
• Packaged in a variety of piece counts for use with both small and large projects