2013 Jaguar XFR-S Fuel and Emissions Systems
Find Your Specific 2013 Jaguar XFR-S Fuel and Emissions Systems
Below you will find various in-demand Jaguar Fuel and Emissions Systems, components and accessories for your 2013 XFR-S. Advance Auto Parts has popular XFR-S parts like Gas Caps, Fuel Pumps, Air Flow Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other XFR-S model years including
2014
2015 and more. Select a category of 2013 Jaguar XFR-S Fuel and Emissions Systems below and start saving instantly.
Popular 2013 Jaguar XFR-S Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 2013 Jaguar XFR-Ss
Carquest Premium – Multi-Use Connector (Part No.PTA1346)
from
$41.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 22.09" Long, Heated, Exact Fit (Part No.234-5153)
from
$149.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Fuel Cap Tester Adapter (Part No.12424)
from
$32.49
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Delphi – Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness (Part No.HM10018)
from
$658.99
Demand for Gasoline Direct injection (GDi) technology globally is expected to grow in excess of 10 percent annually through 2026. Delphi uses the latest generation of OE technology for our GDi, and our GDi service program includes the OE parts, tools and know-how to service this fast-growing, high-performance technology. Delphi is a leading Tier 1 supplier of GDi systems to global OEMs. We offer multiple GDi specific training classes, a technician support hotline staffed by ASE certified technicians, and a full line of GDi high-pressure fuel pumps. Learn more about our training programs and tech hotline at 1-877-463-3574.
Product Features:
See More
Product Features:
- Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
- Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
- Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
- Meets OE specifications
DENSO – Oxygen Sensor: Downstream, 4 Wire, 25.67" Long, Heated, Exact Fit (Part No.234-4791)
from
$351.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
DENSO – Oxygen Sensor: Downstream, 4 Wire, 12.01" Long, Heated, Exact Fit (Part No.234-4794)
from
$84.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1669)
from
$1188.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Bosch – Mass Airflow Sensor (Part No.0280218288)
from
$167.99
Built to OE specification provides the correct function and calibration to ensure trouble-free operation and emission compliance.
Product Features:
See More
Product Features:
- OE Technology provides the correct function and calibration to ensure trouble-free operation and emission compliance
- 100% new product; not re-manufactured or rebuilt
- Sensor and housing are calibrated and sold together ensuring precise sensor reading and optimal engine performance
- Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions
- Can provide up to 20 percent better fuel consumption
Delphi – Mass Air Flow Sensor (Part No.AF10557)
from
$334.99
Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
- Delphi OE technology validated to match the vehicle applications
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPN1801)
from
$198.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC845T)
from
$33.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Manufactured from durable, long-life materials
- Several fastener options to work with any fuel cap compartment configuration
- Fits vehicles orginally equipped with tether
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Carquest Premium – Locking Fuel Tank Cap (Part No.10521)
from
$32.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Multi-Use Connector (Part No.PTA2248)
from
$135.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA1324)
from
$149.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1988)
from
$89.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Upgrade your 2013 Jaguar XFR-S with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2013 Jaguar XFR-S, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jaguar or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your XFR-S functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Fuel and Emissions Systems for the 2013 Jaguar XFR-S, designed to meet your needs without breaking the bank.
From
Gas Cap
replacements to
Fuel Pumps
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2013 Jaguar XFR-S at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $12.49 to $1,188.99, with
an average price of $229.15.
Our 16 Fuel and Emissions Systems in stock come from 5 trusted brands, so you’re sure to find the right part for your 2013 Jaguar XFR-S without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Jaguar XFR-S, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Carquest Premium, and more.
Carquest Premium Fuel and Emissions Systems
start at just $32.99 and boast an impressive 4.4 stars average rating from customers.
With 1 customer reviews and counting, our 2013 Jaguar XFR-S Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2013 Jaguar XFR-S is always ready to roll. We’re committed to providing you with everything you need to keep your XFR-S in top shape, all in one place.
Start shopping confidently below for your 2013 Jaguar XFR-S!
Best-Selling Gas Caps for 2013 Jaguar XFR-Ss
Enhance the driving experience in your Jaguar with 2 quality Gas Cap components, starting at $32.99.
Carquest Premium – Locking Fuel Tank Cap (Part No.10521)
from
$32.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC845T)
from
$33.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Manufactured from durable, long-life materials
- Several fastener options to work with any fuel cap compartment configuration
- Fits vehicles orginally equipped with tether
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Most Popular 2013 Jaguar XFR-S Fuel Pumps
Customize your Jaguar with 3 Fuel Pumps products
like Fuel Pumps,
Direct Injection High Pressure Fuel Pumps, and
Fuel Cap Tester Adapters, all
priced under $1,188.99.
Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1669)
from
$1188.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Delphi – Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness (Part No.HM10018)
from
$658.99
Demand for Gasoline Direct injection (GDi) technology globally is expected to grow in excess of 10 percent annually through 2026. Delphi uses the latest generation of OE technology for our GDi, and our GDi service program includes the OE parts, tools and know-how to service this fast-growing, high-performance technology. Delphi is a leading Tier 1 supplier of GDi systems to global OEMs. We offer multiple GDi specific training classes, a technician support hotline staffed by ASE certified technicians, and a full line of GDi high-pressure fuel pumps. Learn more about our training programs and tech hotline at 1-877-463-3574.
Product Features:
See More
Product Features:
- Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
- Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
- Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
- Meets OE specifications
Carquest Premium – Fuel Cap Tester Adapter (Part No.12424)
from
$32.49
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Top Picks for 2013 Jaguar XFR-S Air Flow Sensors
Upgrade Jaguar XFR-Ss with top-quality Air Flow Sensors parts, including 4 OEM and aftermarket selections for your 2013 model.
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA1324)
from
$149.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 22.09" Long, Heated, Exact Fit (Part No.234-5153)
from
$149.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1988)
from
$89.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Carquest Premium – Multi-Use Connector (Part No.PTA1346)
from
$41.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
In-Demand Fuel Injectors for 2013 Jaguar XFR-Ss
Select from 2 premium Fuel Injectors parts for your 2013 Jaguar XFR-S, with prices ranging from $167.99 to $334.99.
Delphi – Mass Air Flow Sensor (Part No.AF10557)
from
$334.99
Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
- Delphi OE technology validated to match the vehicle applications
Bosch – Mass Airflow Sensor (Part No.0280218288)
from
$167.99
Built to OE specification provides the correct function and calibration to ensure trouble-free operation and emission compliance.
Product Features:
See More
Product Features:
- OE Technology provides the correct function and calibration to ensure trouble-free operation and emission compliance
- 100% new product; not re-manufactured or rebuilt
- Sensor and housing are calibrated and sold together ensuring precise sensor reading and optimal engine performance
- Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions
- Can provide up to 20 percent better fuel consumption
Most Sold 2013 Jaguar XFR-S Oxygen Sensors
Explore our best-selling Jaguar parts for the 2013 XFR-S among 3 OEM and aftermarket options starting from $84.99.
DENSO – Oxygen Sensor: Downstream, 4 Wire, 25.67" Long, Heated, Exact Fit (Part No.234-4791)
from
$351.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Multi-Use Connector (Part No.PTA2248)
from
$135.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
DENSO – Oxygen Sensor: Downstream, 4 Wire, 12.01" Long, Heated, Exact Fit (Part No.234-4794)
from
$84.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Top-Rated Fuel and Emissions Systems Brands For Your 2013 Jaguar XFR-S
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2013 Jaguar XFR-Ss. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2013 XFR-S start at just $32.99 and are rated as high as 4.4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 2013 Jaguar XFR-S Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2013 Jaguar XFR-S, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 2013 Jaguar XFR-S. With over 1 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $32.99. Plus, with over 1 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 2013 Jaguar XFR-S Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 2013 Jaguar XFR-Ss?
Out of 16 Fuel and Emissions Systems that fit 2013 Jaguar XFR-Ss, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Non-Locking Tethered Fuel Tank Cap (12102599) – $33.49
- Vapor Canister Purge Solenoid (12455932) – $198.99
What’s the price range for 2013 Jaguar XFR-S Fuel and Emissions Systems?
Fuel and Emissions System prices for the 2013 Jaguar XFR-S start at $12.49 and go up to $1,188.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 2013 Jaguar XFR-S?
The average price for Fuel and Emissions Systems for the 2013 Jaguar XFR-S is $229.15. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Jaguar XFR-S model years?
What are the cheapest Fuel and Emissions Systems for my 2013 Jaguar XFR-S?
The cheapest 2013 Jaguar XFR-S Fuel and Emissions Systems we carry in stock are:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Fuel Cap Tester Adapter (15480102) – $32.49
- Locking Fuel Tank Cap (17110045) – $32.99
- Non-Locking Tethered Fuel Tank Cap (12102599) – $33.49
- Multi-Use Connector (12443313) – $41.99
What types of Fuel and Emissions Systems do you sell for my 2013 Jaguar XFR-S?
As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2013 Jaguar XFR-S:
Can I get help with 2013 Jaguar XFR-S Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jaguar Fuel and Emissions Systems and more.
What is your return policy for Jaguar XFR-S Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Jaguar XFR-S Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
