2013 Honda Fit Ignition Coils and Boots
More 2013 Honda Fit Ignition Coils and Boots
Find your specific 2013 Honda Fit original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2013 Honda Fit Ignition Coils and Boots
Hitachi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005464850HIT)
from
$79.82
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Enhances durability and increases energy transfer
- Reduces misfires, rough timing and intermittent starting
- High profile insulation to prevent arching
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
Hitachi – Ignition Coil Actual OE Part – New (Part No.IGC0053)
from
$90.99
Hitachi’s Ignition Coils (IGCs) provide the needed energy for today’s high efficiency, high power vehicles. High quality materials ensure that even under the most extreme conditions, Hitachi’s IGCs will not deform or malfunction. Our ignition coils help to produce optimal engine efficiency resulting in reliable performance and gas mileage. Electronic connection points are welded to providing durability during heat cycles. Details such as materials, high turns ratios, and protected circuitry provide a durable and reliable product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi’s ignition coils are the premium choice.
Product Features:
See More
Product Features:
- Benefits of these quality Ignition Coils include efficient spark and reduced need for wires, long product life, and consistent voltage and amperage output.
Prenco – Direct Ignition Coil – (Coil on Plug) (Part No.F3005464850PRN)
from
$91.23
Prenco precision tailored coils are manufactured to OEM specifications with premium components to provide maximum voltage on demand while meeting/exceeding all RFI suppression requirements.
Product Features:
See More
Product Features:
- Multi-component 100% testing to guarantee OE fit and function.
- OE Quality and direct fit application
- Meets or exceeds the OE specifications for durability and performance
- High profile insulation to prevent arching
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48938)
from
$133.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Hitachi – Direct Ignition Coil (Part No.F3005415850HIT)
from
$78.64
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Enhances durability and increases energy transfer
- Reduces misfires, rough timing and intermittent starting
- High profile insulation to prevent arching
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
Delphi – IGNITION COIL (Part No.GN10249)
from
$89.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Hitachi – Ignition Coil Actual OE Part – New (Part No.IGC0073)
from
$152.99
Hitachi’s Ignition Coils (IGCs) provide the needed energy for today’s high efficiency, high power vehicles. High quality materials ensure that even under the most extreme conditions, Hitachi’s IGCs will not deform or malfunction. Our ignition coils help to produce optimal engine efficiency resulting in reliable performance and gas mileage. Electronic connection points are welded to providing durability during heat cycles. Details such as materials, high turns ratios, and protected circuitry provide a durable and reliable product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi’s ignition coils are the premium choice.
Product Features:
See More
Product Features:
- Benefits of these quality Ignition Coils include efficient spark and reduced need for wires, long product life, and consistent voltage and amperage output.
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-2308)
from
$89.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Vemo – Automotive Direct Ignition Coil – (Coil on Plug) (Part No.F3005464850VMO)
from
$74.15
The Vemo Automotive Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Meets or exceeds the OE specifications for durability and performance
- High profile insulation to prevent arching.
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
WSO – Direct Ignition Coil – (Coil on Plug) (Part No.F3005464850WSO)
from
$69.83
Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance. WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. WSO Direct Ignition Coils are designed to adapt the required energy output to match engine-operating conditions and deliver the optimum energy level needed to ignite a diluted stratified charge.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Superior, reliable performance compared to competitive products
- Lower cost alternative to original equipment
- No additional time consuming steps needed for installation
- Factory original equipment connectors
- Improved coil efficiency reduces the need to generate excessive high voltage
- Designed to provide durability and performance
- Noise abatement technology to eliminate audible coil noise
- Lower primary inductance provides high-speed performance
- Maximum available voltage under all operating conditions
- TS 16949 Certification
Delphi – Ignition Coil (Part No.GN10547)
from
$71.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
WSO – Direct Ignition Coil – (Coil on Plug) (Part No.F3005415850WSO)
from
$70.38
Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance. WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. WSO Direct Ignition Coils are designed to adapt the required energy output to match engine-operating conditions and deliver the optimum energy level needed to ignite a diluted stratified charge.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Superior, reliable performance compared to competitive products
- Lower cost alternative to original equipment
- No additional time consuming steps needed for installation
- Factory original equipment connectors
- Improved coil efficiency reduces the need to generate excessive high voltage
- Designed to provide durability and performance
- Noise abatement technology to eliminate audible coil noise
- Lower primary inductance provides high-speed performance
- Maximum available voltage under all operating conditions
- TS 16949 Certification
Hitachi – Direct Ignition Coil (Part No.F3005663857HIT)
from
$76.53
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Enhances durability and increases energy transfer
- Reduces misfires, rough timing and intermittent starting
- High profile insulation to prevent arching
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
DENSO – First Time Fit Direct Ignition Coil – (Coil on Plug) (Part No.F3005415850ND)
from
$94.38
The Denso Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Meets or exceeds the OE specifications for durability and performance
- High profile insulation to prevent arching.
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
NGK – Coil on Plug Boot (Part No.58986)
from
$8.49
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
DENSO – COP BOOTS (Part No.671-4321)
from
$131.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
See More
Popular 2013 Honda Fit Ignition Coils and Boots Categories
2013 Honda Fit Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 2013 Honda Fit. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 9 different Ignition Coils and Boots in our inventory ranging from $52.99 to $152.99. That means you can find the exact parts or products you need to keep that 2013 Honda Fit running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2013 Honda Fit. Hitachi, Carquest Premium, and DENSO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 2013 Honda Fit, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 2013 Honda Fit rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 2013 Honda Fit Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2013 Honda Fit demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Fit the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
FAQs for 2013 Honda Fit Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 2013 Honda Fit?
Out of 9 Ignition Coils and Boots for the 2013 Honda Fit, the most popular in our inventory are:
from
$52.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
