2013 Honda Accord Exhaust Parts
More 2013 Honda Accord Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 2013 Honda Accord, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 2013 Honda Accord Exhaust Parts
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.27405)
from
$357.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 27405. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2003-2007 Honda Accord and interchanges with OE parts 18160-RAA-A00 and 18160-RAA-A11, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18904)
from
$103.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – Exhaust 54242 Exhaust Resonator and Pipe Assembly (Part No.54242)
from
$119.99
Designed to fit, perform and sound like the original system, Walker® resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03415B)
from
$29.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97036)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97133)
from
$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Walker – Exhaust Intermediate Pipe (Part No.74001)
from
$86.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Intermediate Pipe Aluminized 55.75" (Part No.55682)
from
$70.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.19393)
from
$1156.99
The MagnaFlow 2018-2022 Honda Accord Street Series Cat-Back Performance Exhaust System 19393 brings out the personality of your 2.0L 2018-2022 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19393 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19393 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
aFe POWER – Takeda Cat Back Exhaust System: Black Tip, 304 Stainless Steel, Gain up to 13 HP (Part No.49-36605-B)
from
$1409.99
Add power, sound and taste to your Accord with this Takeda cat-back system. 2-1/2″ to 1-3/4″ mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +13 HP and +16 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, oval, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.
Product Features:
See More
Product Features:
- Brush Finished 304 Stainless Steel For Performance and Good Looks
- Dual Stainless Steel Mufflers Delivers A Deep Aggressive Tone
- Dual Oval Tips w/Etched Takeda Logo Give A Custom Appearance
- 100% Hand TIG-Welded For Strength and Durability
Bosal – Bosal, Muffler (Part No.H5000120974BSL)
from
$205.01
Bosal is a major worldwide supplier to car manufacturers for complete exhaust systems. Bosal’s expertise in the design and production of OE exhaust systems ensures easy installation and original equipment performance. Bosal’s Premium Line of replacement exhaust mufflers are made consistent with OE specifications. Built with 16-gauge tubing and fully aluminized, Bosal’s Premium mufflers features a precision-fit, one-piece configuration. This eliminates labor-intensive pipe bending, welding, and cutting, and results in higher quality installations and satisfaction.
Product Features:
See More
Product Features:
- Designed and manufactured to OE specifications
- Precision fit muffler, no welding or cutting
- Manufactured using 16 guage tubing
- Aluminized to reduce corrosion
- One piece configuration
Walker – Exhaust 35595 Exhaust Pipe Spout (Part No.35595)
from
$26.49
Made from quality material for durability, Walker exhaust spout pipes are available in a variety of styles and sizes for direct-fit or universal application.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel for corrosion resistance and performance
- SECURE FIT — Burr-free construction for proper fitment
- BETTER TOGETHER — Use quality Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.51893)
from
$530.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51893. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2020 Honda Pilot, 2008-2019 Honda Odyssey, and more, this direct-fit catalytic converter also interchanges with OE parts 18180-5MJ-A00 and 18180-RLV-A00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed (Part No.16658)
from
$532.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker® Ultra® Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
BRExhaust – Exhaust Flange Gasket (Part No.256-1124)
from
$20.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
Felpro – Exhaust Pipe Flange Gasket (Part No.61348)
from
$27.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – 3 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31383)
from
$8.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – 3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials (Part No.31589)
from
$6.79
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust 36445 Exhaust Pipe Spout (Part No.36445)
from
$26.99
Made from quality material for durability, Walker exhaust spout pipes are available in a variety of styles and sizes for direct-fit or universal application.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel for corrosion resistance and performance
- SECURE FIT — Burr-free construction for proper fitment
- BETTER TOGETHER — Use quality Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
BRExhaust – Exhaust Bolt, Nut, and Spring Kit (Part No.254-999)
from
$13.79
BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust¿s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Quality construction materials to ensure safe and secure exhaust system performance and a long service life
- Manufactured according to strict OE standards
- Sturdy design featuring premium-grade materials
- Compatible with multiple domestic and import vehicles
Dorman – Exh.Flange Bolt Spri (Part No.H80241184731DOR)
from
$10.50
Exh.Flange Bolt Spri
BRExhaust – Exhaust Hanger (Part No.255-383)
from
$6.79
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)
from
$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Help – Heat Shield Bolt Set (Part No.03294CD)
from
$14.29
The catalytic converter heat shield bolt is essential for keeping heat from the exhaust system, away from adjacent car parts and flammable materials positioned under the vehicle. Our direct replacement heat shield bolt secures and holds the catalytic converter heat shield in place.
Product Features:
See More
Product Features:
- Direct replacement ensures a proper fit every time
- For extra protection our Heat Shield Bolts are galvanized for rust-resistance
- Easy to install – No special tools required during installation
- Testing on this part includes salt water corrosion and hardness testing for conformance to product standards and quality
Popular 2013 Honda Accord Exhaust Parts Categories
2013 Honda Accord Exhaust Parts
You count on your 2013 Honda Accord to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 61 Exhaust Parts ranging in price from $1.99 to $1,409.99, you’re sure to find everything you need for your 2013 Honda Accord.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 11 different brands like Walker, Felpro, and Dorman. 2013 Honda Accord Exhaust Parts start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 159 extensive product reviews on 2013 Honda Accord Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are 3 Bolt Exhaust Pipe Flange Gasket: Fiber, Heat Resistant, Premium Materials with 5.0 stars and Exhaust 36421 Exhaust Pipe Spout with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2013 Honda Accord below to get started!
Top-Rated Exhaust Parts Brands For Your 2013 Honda Accord
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Honda Accord running right for years to come. In our inventory you’ll find brands like Walker, Felpro, Dorman, and even more.
Popular BRExhaust Exhaust Parts
You’ll find popular BRExhaust brand products across Exhaust Pipes. All are waiting to get your 2013 Honda Accord back on the road. Some of the top-rated BRExhaust products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 2013 Honda Accord, and some of our most reviewed Walker parts include:
from
$6.79
(16)
3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials
Catalytic Converter Gaskets
from
$6.99
(7)
Donut Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
FAQs for 2013 Honda Accord Exhaust Parts
What are the most purchased Exhaust Parts for the 2013 Honda Accord?
Out of 61 Exhaust Parts for the 2013 Honda Accord, the most popular in our inventory are:
from
$5.49
(1)
Ring Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
What are the top-rated 2013 Honda Accord Exhaust Parts?
Top-rated Exhaust Parts for your 2013 Honda Accord based on customer reviews/ratings are:
from
$4.99
(1)
3 Bolt Exhaust Pipe Flange Gasket: Fiber, Heat Resistant, Premium Materials
“Not a metal gasket, but should do the trick.”
from
$57.99
(1)
Exhaust 36421 Exhaust Pipe Spout
“Worked great but it is made to fit the walker replacement muffler. The OEM muffler has a 2″ outlet, where the Walker has a 2.5″. Looks good though, I ”
from
$526.99
(1)
EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed
“Perfect fit, work flawlessly, code immediately went away on its own”
