2013 Freightliner S2C Belts and Hoses

Essential Belts and Hoses for 2013 Freightliner S2Cs

Gates – Automotive XL« High Capacity V-Belt (Part No.9451)

Automotive XL« High Capacity V-Belt

from

$24.29
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR28429)

Green Stripe« Truck & Bus Series V-Belt

from

$41.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9447HD)

FleetRunner« Heavy-Duty V-Belt

from

$42.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Driveworks – Automotive V-Belt (Part No.45017)

Automotive V-Belt

from

$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 2 1/2 Inch Inner Dia. (Sold by inch) (Part No.77250GL)

Straight Radiator Hoses; EPDM Rubber, HD, 2 1/2 Inch Inner Dia. (Sold by inch)

from

$2.49
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • Not suitable for fuel or oil transfer
  • PLEASE NOTE: Priced and sold by inch. See store for details.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 2.25" Diameter (Part No.E72140)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 2.25" Diameter

from

$30.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Straight Coolant Hose, Heavy-Duty 2-Ply, 2" (Sold by inch) (Part No.77200GL)

Straight Coolant Hose, Heavy-Duty 2-Ply, 2" (Sold by inch)

from

$1.79
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco Heavy Duty Straight Radiator Hose is made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds to withstand the most corrosive elements in diesel engines: oil, coolants, coolant additives, and temperature ranges of -40 Degree F (-40 Degree C) to +212 Degree F (+100 Degree C). This hose meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:
  • Meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • Made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds
  • Withstands the most corrosive elements in diesel engines: oil, coolants, and coolant additives
  • Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +212 Degree F (+100 Degree C)
  • PLEASE NOTE: Priced and sold by inch. See store for details.
See More

Gates – FleetRunner« Heavy-Duty Automatic Belt Drive Tensioner (Part No.38702)

FleetRunner« Heavy-Duty Automatic Belt Drive Tensioner

from

$166.99
Product Features:
  • Optimized components engineered for maximum strength and durability
  • Patented design provides superior belt alignment and tension for improved drive efficiency and life
  • Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
  • Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
  • Double row bearings carry more load and last up to 3X longer than two individual bearings
  • Chrome-silicone round torsion spring for less ┐ex-fatigue than ┐at-spring designs
  • Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.910588A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$156.99
This Litens supplied tensioner is manufactured to original equipment specifications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Heavy duty steel pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 81.875" Long, 8 Rib Count, Exact Fit (Part No.K080813HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 81.875" Long, 8 Rib Count, Exact Fit

from

$82.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 81.141" Long, 8 Rib Count, Exact Fit (Part No.K080806HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 81.141" Long, 8 Rib Count, Exact Fit

from

$68.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080810)

Micro-V« Serpentine Drive Belt

from

$44.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Driveworks – Poly Rib Belt HD Serpentine Belt; 80.51 Long, 8 Rib Count, Heavy Duty (Part No.805K8)

Poly Rib Belt HD Serpentine Belt; 80.51 Long, 8 Rib Count, Heavy Duty

from

$20.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 81.608" Long, 8 Rib Count, Exact Fit (Part No.K080810HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 81.608" Long, 8 Rib Count, Exact Fit

from

$59.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 81 Long, 8 Rib Count, Heavy Duty (Part No.5080810)

Poly Rib Belt HD Serpentine Belt; 81 Long, 8 Rib Count, Heavy Duty

from

$40.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – Green Stripe« Heavy-Duty Straight Heater Hose (Part No.28444)

Green Stripe« Heavy-Duty Straight Heater Hose

from

$10.99
Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.

Product Features:
  • Green Stripe construction provides best cost-per-mile economics
  • Abrasion-resistant cover
  • Engineered with materials to resist electrochemical degradation
  • Reduces water loss from water permeating the hose wall and cover
  • Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 3 Inch Inner Dia. (Sold by foot) (Part No.77300GL)

Straight Radiator Hoses; EPDM Rubber, HD, 3 Inch Inner Dia. (Sold by foot)

from

$2.99
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • Not suitable for fuel or oil transfer
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24232)

Green Stripe« 2-Ply Straight Coolant Hose

from

$2.99
Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
  • Engineered with compounds that resist electrochemical degradation
  • Approved for marine applications
  • Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the inch. See store for details.
See More

Upgrade your 2013 Freightliner S2C with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2013 Freightliner S2C, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Freightliner or enhancing its overall performance, Belts and Hoses are key to keeping your S2C functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Belts and Hoses for the 2013 Freightliner S2C, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Belt Tensioners upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2013 Freightliner S2C at great prices. Our Belts and Hoses inventory for this model ranges from just $1.79 to $166.99, with an average price of $42.53. Our 14 Belts and Hoses in stock come from 4 trusted brands, so you’re sure to find the right part for your 2013 Freightliner S2C without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Freightliner S2C, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Driveworks, and more. Dayco Belts and Hoses start at just $1.79 and boast an impressive 5 stars average rating from customers. With 21 customer reviews and counting, our 2013 Freightliner S2C Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 2013 Freightliner S2C is always ready to roll. We’re committed to providing you with everything you need to keep your S2C in top shape, all in one place. Start shopping confidently below for your 2013 Freightliner S2C!

Best-Selling Serpentine and V Belts for 2013 Freightliner S2Cs

Enhance the driving experience in your Freightliner with 8 quality Serpentine and V Belt components, starting at $5.29.

Dayco – Poly Rib Belt HD Serpentine Belt; 81 Long, 8 Rib Count, Heavy Duty (Part No.5080810)

Poly Rib Belt HD Serpentine Belt; 81 Long, 8 Rib Count, Heavy Duty

from

$40.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Driveworks – Automotive V-Belt (Part No.45017)

Automotive V-Belt

from

$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Driveworks – Poly Rib Belt HD Serpentine Belt; 81 Long, 8 Rib Count, Heavy Duty (Part No.810K8)

Poly Rib Belt HD Serpentine Belt; 81 Long, 8 Rib Count, Heavy Duty

from

$26.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 81.608" Long, 8 Rib Count, Exact Fit (Part No.K080810HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 81.608" Long, 8 Rib Count, Exact Fit

from

$59.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Automotive RPF Raw Edge Cogged Belt (Part No.17450)

Automotive RPF Raw Edge Cogged Belt

from

$15.79
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9451HD)

FleetRunner« Heavy-Duty V-Belt

from

$32.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080810)

Micro-V« Serpentine Drive Belt

from

$44.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9451)

Automotive XL« High Capacity V-Belt

from

$24.29
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Most Popular 2013 Freightliner S2C Belt Tensioners

Customize your Freightliner with 2 Belt Tensioners products like Belt Tensioner Assemblies, all priced under $166.99.

Gates – FleetRunner« Heavy-Duty Automatic Belt Drive Tensioner (Part No.38702)

FleetRunner« Heavy-Duty Automatic Belt Drive Tensioner

from

$166.99
Product Features:
  • Optimized components engineered for maximum strength and durability
  • Patented design provides superior belt alignment and tension for improved drive efficiency and life
  • Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
  • Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
  • Double row bearings carry more load and last up to 3X longer than two individual bearings
  • Chrome-silicone round torsion spring for less ┐ex-fatigue than ┐at-spring designs
  • Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.910588A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$156.99
This Litens supplied tensioner is manufactured to original equipment specifications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Heavy duty steel pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Top Picks for 2013 Freightliner S2C Heater Hoses

Upgrade Freightliner S2Cs with top-quality Heater Hoses parts, including 1 OEM and aftermarket selections for your 2013 model.

Gates – Green Stripe« Heavy-Duty Straight Heater Hose (Part No.28444)

Green Stripe« Heavy-Duty Straight Heater Hose

from

$10.99
Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.

Product Features:
  • Green Stripe construction provides best cost-per-mile economics
  • Abrasion-resistant cover
  • Engineered with materials to resist electrochemical degradation
  • Reduces water loss from water permeating the hose wall and cover
  • Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

In-Demand Radiator Hoses for 2013 Freightliner S2Cs

Select from 3 premium Radiator Hoses parts for your 2013 Freightliner S2C, with prices ranging from $1.79 to $4.79.

Gates – Green Stripe« Heavy-Duty Straight Heater Hose (Part No.28441)

Green Stripe« Heavy-Duty Straight Heater Hose

from

$4.79
Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.

Product Features:
  • Green Stripe construction provides best cost-per-mile economics
  • Abrasion-resistant cover
  • Engineered with materials to resist electrochemical degradation
  • Reduces water loss from water permeating the hose wall and cover
  • Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24232)

Green Stripe« 2-Ply Straight Coolant Hose

from

$2.99
Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
  • Engineered with compounds that resist electrochemical degradation
  • Approved for marine applications
  • Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the inch. See store for details.
See More

Dayco – Straight Coolant Hose, Heavy-Duty 2-Ply, 2" (Sold by inch) (Part No.77200GL)

Straight Coolant Hose, Heavy-Duty 2-Ply, 2" (Sold by inch)

from

$1.79
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco Heavy Duty Straight Radiator Hose is made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds to withstand the most corrosive elements in diesel engines: oil, coolants, coolant additives, and temperature ranges of -40 Degree F (-40 Degree C) to +212 Degree F (+100 Degree C). This hose meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:
  • Meets SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • Made with the highest quality woven mesh fabric reinforcement, neoprene cover, and nitrile tube compounds
  • Withstands the most corrosive elements in diesel engines: oil, coolants, and coolant additives
  • Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +212 Degree F (+100 Degree C)
  • PLEASE NOTE: Priced and sold by inch. See store for details.
See More

Top-Rated Belts and Hoses Brands For Your 2013 Freightliner S2C

Shop for the best-rated brands offering Belts and Hoses and other products for your 2013 Freightliner S2Cs. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 2013 S2C start at just $1.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2013 Freightliner S2C Belts and Hoses

When it comes to maintaining or upgrading your 2013 Freightliner S2C, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2013 Freightliner S2C. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.79, with an average price of just $19.52. Plus, with over 16 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Automotive RPF Raw Edge Cogged Belt
from
$15.79
This product is not rated

Automotive RPF Raw Edge Cogged Belt

“”

Straight Coolant Hose, Heavy-Duty 2-Ply, 2" (Sold by inch)
from
$1.79
This product is not rated

Straight Coolant Hose, Heavy-Duty 2-Ply, 2" (Sold by inch)

“”

Poly Rib Belt HD Serpentine Belt; 81 Long, 8 Rib Count, Heavy Duty
from
$40.99

(16)

Poly Rib Belt HD Serpentine Belt; 81 Long, 8 Rib Count, Heavy Duty

“Also for our family truck.”

Popular Driveworks 2013 Freightliner S2C Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2013 Freightliner S2C owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2013 S2C, Advance Auto Parts carries a full inventory of 2 Driveworks Belts and Hoses. Plus you will be keeping your Freightliner in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $5.29 to $26.99, plus, with more than 5 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

Poly Rib Belt HD Serpentine Belt; 81 Long, 8 Rib Count, Heavy Duty
from
$26.99

(4)

Poly Rib Belt HD Serpentine Belt; 81 Long, 8 Rib Count, Heavy Duty

“Perfect fit. So far, so good.”

Automotive V-Belt
from
$5.29

(1)

Automotive V-Belt

“Usa belt, awesome quality”

FAQs for 2013 Freightliner S2C Belts and Hoses

Which Belts and Hoses are best-sellers for 2013 Freightliner S2Cs?

Out of 14 Belts and Hoses that fit 2013 Freightliner S2Cs, the following parts are the top sellers:

What’s the price range for 2013 Freightliner S2C Belts and Hoses?

Belts and Hose prices for the 2013 Freightliner S2C start at $1.79 and go up to $166.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2013 Freightliner S2C?

The average price for Belts and Hoses for the 2013 Freightliner S2C is $42.53. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Freightliner S2C model years?

Yes, we currently carry Belts and Hoses for 7 model years of Freightliner S2Cs between 2014 and 2020. Belts and Hoses are bought most frequently for the following model years: 2017, 2014, 2020, 2019, 2016, 2015, and 2018.

What are the cheapest Belts and Hoses for my 2013 Freightliner S2C?

The cheapest 2013 Freightliner S2C Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 2013 Freightliner S2C?

Out of 21 reviews by customers, our 2013 Freightliner S2C Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2013 Freightliner S2C and their top-rated products:

What types of Belts and Hoses do you sell for my 2013 Freightliner S2C?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2013 Freightliner S2C:

Can I get help with 2013 Freightliner S2C Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Freightliner Belts and Hoses and more.

What is your return policy for Freightliner S2C Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Freightliner S2C Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.