2013 Chevrolet Traverse Body Parts

Below you will find various in-demand Chevrolet Body Parts, components and accessories for your 2013 Traverse. Advance Auto Parts has popular Traverse parts like Vehicle Windows, Vehicle Latches and Handles, Vehicle Doors and more. You’ll also find aftermarket and OEM Body Parts for other Traverse model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2013 Chevrolet Traverse Body Parts below and start saving instantly.

Popular 2013 Chevrolet Traverse Body Parts Categories

Bumper Deflectors

Window Regulators

Tailgate Lock Actuators

Lift Supports

Spare Tire Carrier Mounts

Running Boards and Steps

Trunk Actuators

Grilles

Door Lock Motors

Side Bars and Sideskirts

Consoles

Power Window Switches

Exterior Door Handles

Grille Overlays

Step Nerf Bar Mount Kits

Liftgate Release Switches

Bumper Cover Reinforcements

Splash Guard (Mud Flap)

Mirror Switches

Door Lock Solenoid Connectors

Bumper Impact Bars

Rocker Panel Molding Retainers

Door Mirror Glass Assemblies

Custom Mirrors

Door Lock Switches

Fender Braces

Convertible Top Switch Connectors

Bumper Cover Supports

Exterior Door Handle Cover Sets

Bumper Impact Absorbers

Mirror Replacement Glass

Exterior Door Handle Covers

Body Side Molding Clips

Liftgate Ajar Indicator Switches

Power Door Resistance Pinch Sensors

Wheel Arch Flare Rivet

Hood Scoop Clip

Floor Pan Retainers

Essential Body Parts for 2013 Chevrolet Traverses

from

$293.99

New CAPA Certified Premium Replacement Rear Bumper Cover Reinforcement Bar

Product Features:

Made Of Ultra-High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$15.99

GM Genuine Parts Liftgate Ajar Indicator Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$32.99

New Standard Replacement Driver Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$174.99

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

Required Part For Oval Tubes
Vehicle Specific Mount Kit Insures Proper Fit
5 Year Warranty

from

$4.99

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for long-lasting durability.
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$84.99

Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$3.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$34.49

Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Replace your cracked or broken driver side Mirror glass at a fraction of the dealer cost
Original equipment quality, fit and function
Includes Backing Plate
Step-by-step instructions for easy installation

from

$36.99

Make better electrical repairs and accessory installations with this versatile and durable pigtail connector. It allows quick circuit disconnections for service, and is engineered for reliable performance.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.49

GM Genuine Parts Door Lock Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$39.99

Front Lower Bumper Deflector, Plastic

from

$299.99

This liftgate lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this liftgate lock actuator has undergone extensive quality and safety performance testing.
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and cycle testing to ensure a quality fit and long service life

from

$687.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, With Chrome, for LT/LTZ/Premier Models. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

With Chrome, For LT/LTZ/Premier Models, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$84.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$28.49

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:

Protect Your Vehicle And Trailer From Rocks And Messy Conditions
Universal Fitting
Easy No Drill Installation
Perfect Compliment Nerf Bars

from

$40.99

This door mirror switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door mirror switch is made to match the fit and performance of the original switch on specific vehicle applications.
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$42.99

New Standard Replacement Passenger Side Hood Hinge, Hood Mounted

Product Features:

Hood Mounted, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$309.99

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

Vehicle Specific Mounting Kit Required; Sold Separately
4 in. Oval Tube
Injection Molded Polymer Step Pad
Molded Oval End Caps
Bolt-On Installation; No Drilling Required
3 Year Warranty

from

$29.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$95.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Front Bumper Cover Grille, Black With Chrome Surround. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Black With Chrome Surround, Made Of Olefinic Thermoplastic Elastomer and ABS
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$126.99

Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models.
Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement.
Functionality ensured – hoist appearance may vary slightly from original part but functions the same
Corrosion resistant – specially coated to prevent future rust and corrosion

from

$181.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$25.99

from

$123.99

Power Door Resistance Pinch Sensor

from

$149.99

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass is power adjustable and heated, with turn signal
OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
Manual folding for additional clearance
Textured Black

from

$161.99

As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, We Are Supplying a New CAPA Certified Premium Replacement Front Bumper Impact Absorber, Made of EPP Foam. It is Designed to Replace Your Existing Bumper Impact Absorber. Check to Be Sure it Fits Your Vehicle.

Product Features:

Made Of EPP Foam
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$319.99

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Product Features:

Made Of Ultra-High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$69.99

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

Upgrade your 2013 Chevrolet Traverse with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2013 Chevrolet Traverse, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Body Parts are key to keeping your Traverse functioning at its best. At Advance Auto Parts, we offer a wide selection of 137 Body Parts for the 2013 Chevrolet Traverse, designed to meet your needs without breaking the bank. From Vehicle Window replacements to Vehicle Latches and Handles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2013 Chevrolet Traverse at great prices. Our Body Parts inventory for this model ranges from just $1.99 to $687.99, with an average price of $123.60. Our 137 Body Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 2013 Chevrolet Traverse without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Chevrolet Traverse, we stock popular OEM and aftermarket Body Parts from top names like Carquest Dorman, and more. Carquest Body Parts start at just $28.05 and boast an impressive 4 stars average rating from customers. With 42 customer reviews and counting, our 2013 Chevrolet Traverse Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2013 Chevrolet Traverse is always ready to roll. We’re committed to providing you with everything you need to keep your Traverse in top shape, all in one place. Start shopping confidently below for your 2013 Chevrolet Traverse!

Best-Selling Vehicle Windows for 2013 Chevrolet Traverses

Enhance the driving experience in your Chevrolet with 2 quality Vehicle Window components, starting at $116.99.

show more show less

from

$175.99

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

from

$116.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

Most Popular 2013 Chevrolet Traverse Vehicle Latches and Handles

Customize your Chevrolet with 11 Vehicle Latches and Handles products like Exterior Door Handles, Hood Latch Supports, and Exterior Door Handle Cover Sets, all priced under $69.99.

show more show less

from

$69.99

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$34.99

This exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles.
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.29

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles.
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.29

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles.
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$69.99

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$54.99

New Standard Replacement Hood Latch Support

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$53.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles.
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles.
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.49

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles.
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$33.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles.
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.29

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles.
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top Picks for 2013 Chevrolet Traverse Vehicle Doors

Upgrade Chevrolet Traverses with top-quality Vehicle Doors parts, including 7 OEM and aftermarket selections for your 2013 model.

show more show less

from

$28.49

This door lock switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door lock switch is made to match the fit and performance of the original switch on specific vehicle applications.
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.79

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$26.49

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$142.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$114.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$123.99

Power Door Resistance Pinch Sensor

from

$36.99

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

In-Demand Bodies and Fender Parts for 2013 Chevrolet Traverses

Select from 38 premium Bodies and Fender Parts parts for your 2013 Chevrolet Traverse, with prices ranging from $1.99 to $541.99.

show more show less

from

$4.49

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Product Features:

Available in blind, push-in and screw-in styles
Constructed of high-quality materials for long-lasting durability
Also suitable for a broad variety of industrial and commercial uses
Packaged in a variety of piece counts for use with both small and large projects

from

$28.49

Protect Your Vehicle And Trailer From Rocks And Messy Conditions
Universal Fitting
Easy No Drill Installation
Perfect Compliment Nerf Bars

from

$1.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$48.49

The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:

Classic Styling Of Brite-Tread Aluminum
Front Or Rear Wheel Protection
Radius Notch Contours To The Fender Well
Protected By A BriteGard Powder Coat Finish

from

$39.49

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:

Protect Your Vehicle And Trailer From Rocks And Messy Conditions
Classic Diamond Style Design
Protected By A BriteGard Powder Coat Finish
Compliment Brite-Tread Running Boards

from

$4.99

Constructed of high-quality materials for long-lasting durability.
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$153.99

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Chevy Traverse, GMC Acadia and Saturn Outlook (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

Unique bends to contour to the body of the vehicle
Custom, non-skid step pads for safe entry and exit
3″ diameter, heavy-wall tube design
High-strength carbon steel construction
Highly rust-resistant semi-gloss black powder coat and E-coat finish
No-drill, vehicle-specific application for a custom fit
Heavy-duty steel mounting brackets for a solid step

from

$54.99

New Standard Replacement Passenger Side Fender Liner, Front Section, LS/LT/LTZ Models

Product Features:

Front Section, LS/LT/LTZ Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$126.99

Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models.
Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement.
Functionality ensured – hoist appearance may vary slightly from original part but functions the same
Corrosion resistant – specially coated to prevent future rust and corrosion

from

$129.99

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

Designed Use With TrailFX SUV Running Boards
Mounts To Rocker Panel And Is Adjustable For Use With Multiple Board Lengths
Available For The Most Popular SUV Or CUV On The Market
Provides Moderate Protection Against Road Hazards And Debris

from

$472.99

Whether you’re looking for additional traction or easier vehicle entry, TrailFX Running Boards offer a rigid yet attractive solution for trucks, vans, and SUVs. Spanning the full length of the vehicle, these running boards are designed to withstand and deflect the elements, dirt, and debris. Constructed with high quality materials, and designed with style in mind, TrailFX Running Boards are an essential addition to any personal or professional vehicle.

Product Features:

Heavy Duty, Extruded Aluminum And Polished, Marine Grade Stainless Steel Outer Trim Ensure Maximum Strength And Durability
3.5 Inch Wide, UV Resistant Step Creates A Secure, Non Slip Surface For Entering And Exiting The Vehicle
Seamless, Welded Ends Add A Clean, Finished Look
Track Mounting System Allows For Multiple Mounting Positions To Clear Mud Flaps
Installation Is Simple Using Required Mounting Brackets
Limited 3 Year Warranty

from

$53.99

New Standard Replacement Driver Side Fender Liner, Front Section, LS/LT/LTZ Models

Product Features:

Front Section, LS/LT/LTZ Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$16.99

New Standard Replacement Passenger Side Fender Liner, Rear Section, LS/LT/LTZ Models

Product Features:

Rear Section, LS/LT/LTZ Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$3.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$541.99

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Stainless or Black

Product Features:

Lightweight Aluminum Powder Coated Frame
Full Length Protective Accent Trim
Slip Resistant Raised Rubber Grommets On The Step Area
NRT(TM) Powder Coated Steel Braces
No Drilling Required

from

$500.99

Unique Style w/Tough Construction
Sleek Style And Finish
OE Style Look
UV Stable 5 in. Wide Step Pad
Stylized End Caps
Contoured Step Pad
Lifetime Warranty

from

$498.99

Lightweight Aluminum Powder Coated Frame
Full Length Protective Accent Trim
Slip Resistant Raised Rubber Grommets On The Step Area
NRT(TM) Powder Coated Steel Braces
No Drilling Required

from

$485.99

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

Vehicle Specific Mount Kit Required; Sold Separately
Corrosion Resistant Extruded Aluminum Board
Slip Resistant Textured Step Surface
Injection Molded Polymer End Caps
Rocker Panel Gap Strip Included For Finished Look
Optional Light Kit Available PN[27-6000]

from

$466.99

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

Vehicle Specific Mount Kit Required; Sold Separately
Corrosion Resistant Extruded Aluminum Board
Slip Resistant Textured Step Surface
Injection Molded Polymer End Caps
Rocker Panel Gap Strip Included For Finished Look
Optional Light Kit Available PN[27-6000]

from

$455.99

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

Vehicle Specific Mounting Kit Required; Sold Separately
4 in. Oval Tube
Injection Molded Polymer Step Pad
Molded Oval End Caps
Bolt-On Installation; No Drilling Required
Limited Lifetime Warranty

from

$431.99

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

Mount Kit Included
Rocker Panel Mount
Drilling Not Required
2 Pads On The Bar
60 To 180 Minute Professional Installation Time
T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab: Oval Step Shape Offers A Wider Stepping Area For Secure Footing
Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
Provides Moderate Protection Against Road Hazards And Debris

from

$426.99

Westin’s SG6 Running Boards feature textured slip resistant step pads enhancing footing in virtually all weather conditions. SG6 Running Boards also include a rocker panel gap strip to provide users with the appropriate Westin finished look. A polished aluminum finish with a protective anodized coating prevents oxidation increasing durability and extending product life. A vehicle specific mount kit is required and sold separately. The SG6 LED Light Kit is also available and sold separately. Choose Westin’s SG6 Running Boards for the perfect balance between safety, function and style!

Product Features:

Vehicle Specific Mount Kit Required; Sold Separately
Stylish Modern Design
5 1/2 in. Step Surface Width
Corrosion Resistant Extruded Aluminum Board
Injection Molded End Caps
Slip Resistant Textured Step Surface
Rocker Panel Gap Strip Included For Finished Look
Optional Light Kit For End Caps PN[27-60000]

from

$424.99

Lightweight Aluminum Powder Coated Frame
Full Length Protective Accent Trim
Slip Resistant Raised Rubber Grommets On The Step Area
NRT(TM) Powder Coated Steel Braces
No Drilling Required

from

$345.99

Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and 91. To ensure a perfect fit Vehicle-Specific Mounting Kits are required and are purchased separately. Each mounting kit is exactly machined for a No-Drill Installation.

Product Features:

Unique Style w/Tough Construction
Sleek Style And Finish
OE Style Look
UV Stable 5 in. Wide Step Pad
Stylized End Caps
Contoured Step Pad

from

$322.99

Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:

Mount Kit Included
3 in. Round Step Bars
Economical Step-Up Solution
Vehicle Specific Applications
Injection Molded Polymer Step Pad
Recessed Step Area
Bolt-On Installation; No Drilling Required

from

$319.99

Mount Kit Included
Rocker Panel Mount
Drilling Not Required
2 Pads On The Bar
60 To 180 Minute Professional Installation Time
Q235A Steel Finished With A Gloss Black Powder Coat Ensures Maximum Strength And Durability
Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
Oval Step Shape Offers A Wider Stepping Area For Secure Footing
Provides Moderate Protection Against Road Hazards And Debris

from

$309.99

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

Vehicle Specific Mounting Kit Required; Sold Separately
4 in. Oval Tube
Injection Molded Polymer Step Pad
Molded Oval End Caps
Bolt-On Installation; No Drilling Required
3 Year Warranty

from

$185.99

SG6 LED Running Boards are designed to be vehicle specific and require a mount kit (sold separately). Kit includes driver and passenger side e-coated steel mount brackets, complete with hardware and installation instruction sheet.

Product Features:

Black Powder Coat Finish
E-Coated Steel
5 Year Warranty

from

$174.99

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

Required Part For Oval Tubes
Vehicle Specific Mount Kit Insures Proper Fit
5 Year Warranty

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$142.99

This replacement console lid restores the appearance and function of a worn or damaged original equipment lid. Made of durable materials, this direct replacement part is designed for long-lasting durability.

Product Features:

Ideal replacement – this console lid matches the fit and function of the original equipment lid.
Durable construction – this console cover is made from quality materials for durability.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$134.99

Ideal replacement – this console lid matches the fit and function of the original equipment lid.
Durable construction – this console cover is made from quality materials for durability.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$65.99

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$32.99

New Standard Replacement Driver Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$32.99

New Standard Replacement Passenger Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$15.99

New Standard Replacement Driver Side Fender Liner, Rear Section, LS/LT/LTZ Models

Product Features:

Rear Section, LS/LT/LTZ Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.29

Available in blind, push-in and screw-in styles.
Constructed of high-quality materials for long-lasting durability
Also suitable for a broad variety of industrial and commercial uses
Packaged in a variety of piece counts for use with both small and large projects

from

$2.49

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

Needa Parts offers a complete assortment for all popular makes and models
Vehicle make specific fastener kits are available
All fasteners meet or exceed OEM standards

Most Sold 2013 Chevrolet Traverse Vehicle Hoods

Explore our best-selling Chevrolet parts for the 2013 Traverse among 9 OEM and aftermarket options starting from $4.49.

show more show less

from

$33.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$29.99

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$48.99

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$42.99

New Standard Replacement Passenger Side Hood Hinge Assembly, Body Mounted

Product Features:

Body Mounted, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$42.99

New Standard Replacement Passenger Side Hood Hinge, Hood Mounted

Product Features:

Hood Mounted, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$42.99

New Standard Replacement Driver Side Hood Hinge Assembly, Body Mounted

Product Features:

Body Mounted, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$42.99

New Standard Replacement Driver Side Hood Hinge, Hood Mounted

Product Features:

Hood Mounted, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Top-Rated Body Parts Brands For Your 2013 Chevrolet Traverse

Shop for the best-rated brands offering Body Parts and other products for your 2013 Chevrolet Traverses. Below you’ll find some of our best rated Body Parts from Carquest and Dorman, and more. Body Parts from these brands that fit a 2013 Traverse start at just $1.99 and are rated as high as 4 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 2013 Chevrolet Traverse Body Parts

When it comes to maintaining or upgrading your 2013 Chevrolet Traverse, using quality Body Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Body Parts, specifically designed for the 2013 Chevrolet Traverse. With over 3 Carquest brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $28.05, with an average price of just $49.70. Plus, with over 1 customer reviews and an average rating of 4 stars, you can trust that our Carquest Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$83.99

(1)

Door Window Switch

“Great OEM replacement”

from
$37.05

This product is not rated

Door Window Switch

“”

from
$28.05

This product is not rated

Power Window Switch

“”

Popular Dorman 2013 Chevrolet Traverse Body Parts

Dorman auto parts is one of the highest quality Body Part brands in the market. Any 2013 Chevrolet Traverse owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2013 Traverse, Advance Auto Parts carries a full inventory of 36 Dorman Body Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dorman Body Parts range from $1.99 to $299.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

from
$28.49

This product is not rated

Door Lock Switch – Passenger Side

“”

from
$1.99

This product is not rated

Nylon Cowl Retainers GM

“”

from
$4.49

This product is not rated

GM Hood Insulation Retainer

“”

FAQs for 2013 Chevrolet Traverse Body Parts

Which Body Parts are best-sellers for 2013 Chevrolet Traverses?

Out of 137 Body Parts that fit 2013 Chevrolet Traverses, the following parts are the top sellers:

Ebony Door Window Switch (11680463) – $95.99
Ebony Door Window Switch (12043864) – $35.49
Liftgate Lift Support: 20.72" Ext Length, 7.0" Travel, 149 Lbs of Force, 1 Pk (10865929) – $33.99

What’s the price range for 2013 Chevrolet Traverse Body Parts?

Body Part prices for the 2013 Chevrolet Traverse start at $1.99 and go up to $687.99 for the most premium parts.

What’s the average price of a Body Part for a 2013 Chevrolet Traverse?

The average price for Body Parts for the 2013 Chevrolet Traverse is $123.60. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Chevrolet Traverse model years?

Yes, we currently carry Body Parts for 14 model years of Chevrolet Traverses between 2009 and 2023. Body Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Body Parts for my 2013 Chevrolet Traverse?

The cheapest 2013 Chevrolet Traverse Body Parts we carry in stock are:

Nylon Cowl Retainers GM (11224068) – $1.99
Panel Trim Retainer – Interior – GM/Chrysler (9110488) – $2.49
GM Rear Valance Clip (11910818) – $3.99
Blind Rivet Retainer-GM-Diameter 3/16 In. (10658372) – $4.29
GM Blind Rivet Retainer – Diameter 3/16 In. (11911129) – $4.49

What are the top-rated Body Parts that fit the 2013 Chevrolet Traverse?

Out of 42 reviews by customers, our 2013 Chevrolet Traverse Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 2013 Chevrolet Traverse and their top-rated products:

Vehicle Hoods
- Liftgate Lift Support: 20.72" Ext Length, 7.0" Travel, 149 Lbs of Force, 1 Pk (10865929) – $33.99
Power Window Parts
- Liftgate Lift Support: 20.72" Ext Length, 7.0" Travel, 149 Lbs of Force, 1 Pk (10865929) – $33.99

What types of Body Parts do you sell for my 2013 Chevrolet Traverse?

As of 2/5/25, these are some of the most in-demand types of Body Parts for a 2013 Chevrolet Traverse:

Can I get help with 2013 Chevrolet Traverse Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Body Parts and more.

What is your return policy for Chevrolet Traverse Body Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Traverse Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2013 Chevrolet Traverse Body Parts

KAI – Bumper Cover Reinforcement (Part No.GM1106676DSC)

GM Genuine Parts – Liftgate Release Switch (Part No.15299399)

KAI – Fender Brace (Part No.GM1244102)

Westin – Premier Oval Nerf Step Bar Mount Kit (Part No.22-1795)

Dorman – Windshield Garnish Clip – Exterior (Part No.963-211)

COAST TO COAST – Gloss Black, Abs Plastic, With Door Handle Trim, With Covers For 4 Doors (Part No.CCIDH68566S4B)

Dorman – Panel Trim Retainer – Interior – GM/Ford/Chrysler (Part No.45680)

K-Source – Truck/ SUV Replacement Mirror: Driver Side, Flat, Includes Backing Plate (Part No.88223)

Dorman – Door Lock Actuator Connector (Part No.645-165)

GM Genuine Parts – Black Single Door Lock Switch with Blue Backlighting (Part No.15804094)

KAI – Front Lower Bumper Deflector, Plastic (Part No.GM1092235)

Dorman – Liftgate Lock Actuator (Part No.931-107)

KAI – New Standard Replacement Grille, With Chrome, For LT/LTZ/Premier Models (Part No.GM1200662)

Carquest Premium – Door Window Switch (Part No.WSC1004)

Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)

Dorman – Power Mirror Switch – Front Left (Part No.920-051)

KAI – Hood Hinge (Part No.GM1236169)

Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5025)

Atlas Lift – Lift Support (Part No.LS10473)

KAI – Front Bumper Cover Grille, Plastic (Part No.GM1036120)

Dorman – Spare Tire Hoist Assembly (Part No.924-520)

ACDelco – Multi-Purpose Pigtail (Part No.PT2195)

Carquest Premium – Liftgate Release Switch (Part No.SBA2287)

Carquest Premium – Power Door Resistance Pinch Sensor (Part No.PDC1152)

K-Source – Mirror Assembly: Driver Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.62128G)

KAI – New CAPA Certified Premium Replacement Front Bumper Impact Absorber (Part No.GM1070277DSC)

KAI – Bumper Cover Reinforcement (Part No.GM1006657DSC)

COAST TO COAST – Chrome Plated, Abs, With Driver Side Keyhole/ Without Passenger Side Keyhole (Part No.CCIDH68523B)

Dorman – Power Window Regulator And Motor Assembly (Part No.751-580)

Dorman – Power Window Regulator And Motor Assembly (Part No.741-029)

COAST TO COAST – Chrome Plated, Abs, With Driver Side Keyhole/ Without Passenger Side Keyhole (Part No.CCIDH68523B)

Dorman – Help – Exterior Door Handle Front Left Reinforcement Bracket (Part No.81103)

Dorman – Help – Reinforcement Bracket Exterior Door Handle (Part No.81108)

Dorman – Help – Exterior Door Handle Rear Left Reinforcement Bracket (Part No.81107)

COAST TO COAST – Gloss Black Abs, With Driver Side, Without Passenger Side Keyhole (Part No.CCIDH68523BBK)

KAI – Hood Latch Support (Part No.GM1233105)

Dorman – Help – Exterior Door Handle Front Left Reinforcement Bracket (Part No.81106)

Dorman – Help – Exterior Door Handle Rear Left Reinforcement Bracket (Part No.88317)

Dorman – Help – Exterior Door Handle Rear Left Reinforcement Bracket (Part No.81104)

Dorman – Help – Exterior Door Handle Front/Rear Right Reinforcement Bracket (Part No.81102)

Dorman – Help – Exterior Door Handle Front/Rear Right Reinforcement Bracket (Part No.81105)

Dorman – Door Lock Switch – Passenger Side (Part No.901-109)

GM Genuine Parts – Ebony Driver Side Door Lock Switch with Blue Lagoon Backlighting (Part No.25867270)

GM Genuine Parts – Black Single Door Lock Switch with Blue Backlighting (Part No.15804094)

Dorman – Door Lock Actuator – Integrated With Latch (Part No.931-915)

Dorman – Door Lock Actuator – Integrated With Latch (Part No.931-914)

Carquest Premium – Power Door Resistance Pinch Sensor (Part No.PDC1152)

Dorman – Door Lock Actuator Connector (Part No.645-165)

Dorman – GM Blind Rivet Retainer – Diameter 3/16 In. (Part No.963-205D)

Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)

Dorman – Nylon Cowl Retainers GM (Part No.961-362)

Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)

Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)

Dorman – Windshield Garnish Clip – Exterior (Part No.963-211)

ARIES – 3 Inch Round Side Bars (Part No.204031)

KAI – Fender Liner (Part No.GM1249208)

Dorman – Spare Tire Hoist Assembly (Part No.924-520)

TrailFX – For Trail Fx Running Boards (Part No.R0016MK)

TrailFX – TFX Running Boards, with SS Trim, Alum, Unlighted, Mounting Bracket Required, 76 In Length (Part No.R0005RB)

KAI – Fender Liner (Part No.GM1248208)

KAI – Fender Liner (Part No.GM1249209)

Dorman – GM Rear Valance Clip (Part No.963-402D)

Dee Zee – Powder Coated, With Black Trim, Unlighted, Requires Running Board Mounting Kit (Part No.DZ16203)

Westin – Premier 6 Oval Nerf Step Bars (Part No.22-6020)

Dee Zee – Powder Coated, Black With Chrome Trim, Aluminum, Unlighted (Part No.DZ16202)

Westin – Sure-Grip Running Boards (Part No.27-6120)

Westin – Sure-Grip Running Boards (Part No.27-6620)

Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5020)

TrailFX – 4"Oval Straight, Polished, Ss, With Step Pad/Welded End Cap, Rocker Panel Mount (Part No.A1503S)

Westin – SG6 Running Boards (Part No.27-64715)

Dee Zee – Powder Coated, Black, Aluminum, Unlighted, Requires Running Board Mounting Kit (Part No.DZ16201)

Westin – Premier 6 Oval Nerf Step Bars (Part No.22-6025)

Westin – E-Series 3 Round Nerf Step Bars (Part No.23-3380)

TrailFX – With Step Pads, 4 Inch Oval Straight, Black, Mild Steel, Rocker Panel Mount (Part No.A1503B)

Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5025)

Westin – Running Board Mount Kit (Part No.27-1835)

Westin – Premier Oval Nerf Step Bar Mount Kit (Part No.22-1795)

Le Bra – Front End Cover, Vinyl, Black (Part No.551380-01)

Dorman – Console Lid Replacement (Part No.925-088)