2013 Chevrolet Impala Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 2013 Chevrolet Impalas

ACDelco – GM Original Equipment Manifold Absolute Pressure Sensor (Part No.C7044559872ACD)

GM Original Equipment Manifold Absolute Pressure Sensor

from

$62.40
The ACDelco GM Original Equipment Multi-Purpose Pressure Sensor converts mechanical force into an electrical signal, and is a GM-recommended replacement for your vehicle’s original component. It monitors the pressure of various system fluids in your vehicle. This original equipment multi-purpose pressure sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – GDI SEAL TOOL KIT (Part No.ATK-001)

GDI SEAL TOOL KIT

from

$119.99
GDI SEAL TOOL KIT

ACDelco – Ambient Temp Sensor (Part No.P4025360720ACD)

Ambient Temp Sensor

from

$39.58
Ambient Temp Sensor

GM Genuine Parts – Secondary Air Injection Pump Check Valve Gasket (Part No.219-600)

Secondary Air Injection Pump Check Valve Gasket

from

$7.99
GM Genuine Parts Secondary Air Injection Pump Check Valve Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help form a gas-tight seal between the check valve and secondary air components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps maintain controlled air flow to proper air injection components
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Tank Lock Ring (Right) (Part No.TR26)

Fuel Tank Lock Ring (Right)

from

$12.99
GM Genuine Parts Fuel Tank Sender Retainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These retainers help align and secure your vehicle’s fuel tank sender. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Help align and secure fuel tank sender
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Fuel Line Connectors, Retainers & Repair Kits (Part No.800-123.5)

Fuel Line Connectors, Retainers & Repair Kits

from

$6.99
Fuel Line Connectors, Retainers & Repair Kits

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1002)

Vapor Canister Purge Solenoid

from

$63.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Vapor Canister Vent (Part No.B7091575660ACD)

Vapor Canister Vent

from

$85.33
Vapor Canister Vent

INA – Fuel Pump Tappet (Part No.E3013418177INA)

Fuel Pump Tappet

from

$41.35
Fuel Pump Tappet

Carquest – Fuel Injector Seal Kit (Part No.274838)

Fuel Injector Seal Kit

from

$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High-quality materials withstand extreme conditions
  • Undergoes extensive testing to ensure reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

ACDelco – GM Original Equipment Electric Fuel Pump Assembly (Part No.E3001848138ACD)

GM Original Equipment Electric Fuel Pump Assembly

from

$689.13
The ACDelco Electric Fuel Pump Assembly and their related components are designed to meet the highest standards in the industry. This helps to ensure their ability to provide impressive fuel delivery performance, quick engine starts and continuous fuel supply, minimum noise and vibration, long-lasting durability and easy installation and fit. The ACDelco Fuel Pump is manufactured in ISO-9001 and QS-9000 registered facilities, quality is assured and backed by competitive warranty coverage.

Product Features:
  • Hybrid Modular Reservoir Assembly (MRA)
  • Latest fuel level sensor design eliminates failures due to worn fingers on sensor wiper arm, sulfur contamination, wire wound sensors and lead sensor kits
  • Improved electrical connections that eliminate below-cover burning due to vehicle vibration over previous designs
  • Improved pump design to increase pump life and reduce pump noise over previous designs
  • Pump changed from a roller vane design to a ge-rotor design
  • The ACDelco fuel pump line includes: electric (in-line and in-tank), modular assemblies and mechanical pumps.
See More

Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-731)

Evaporative Emissions Canister Vent Valve

from

$31.49
A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.

Product Features:
  • Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment function at a lower price
  • Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance
See More

Dorman – Fuel Pump Driver Module – OE Fix (Part No.601-130)

Fuel Pump Driver Module - OE Fix

from

$195.99
If your GM vehicle starts hard, stalls or is running poorly, it could be because of a failing fuel pump driver module. But when the factory module fails on select models, the dealership’s replacement part requires expensive calibration and programming. This time-saving Dorman OE FIX replacement is pre-programmed for an easier and more predictable installation. It also features a thermal- and vibration-tested backing plate for greater resistance to corrosion, and upgraded active electronic components for added reliability.

Product Features:
  • Pre-programmed replacement – this fuel pump driver module for GM vehicles directly replaces the original and requires no programming for installation
  • Upgraded design – module features enhanced microcontroller and new active electronic components for added reliability
  • Durable construction – module housing is thermal- and vibration-tested, with a powder-coated aluminum backing plate for corrosion resistance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – Fuel Injection Fuel Rail Pressure Sensor (Part No.12635273)

Fuel Injection Fuel Rail Pressure Sensor

from

$99.99
ACDelco GM Original Equipment Fuel Injection Fuel Rail Pressure Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: Ignition, and/or Engine Fuel Management. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Fuel Tank Lock Ring (Part No.LO1582931)

Fuel Tank Lock Ring

from

$16.99
Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:
  • Engineered to meet or exceed all OEM specifications.
  • Precision stamped and are treated with a rust proof finish to ensure durability and strength
See More

Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)

Nylon Nut - 1/4 In. (No.14)

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 73228)

Fuel Injector O-Ring Kit

from

$24.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

ACDelco – Direct Fuel Injector Assembly (Part No.217-3444)

Direct Fuel Injector Assembly

from

$127.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Fuel Tank Strap Set (Part No.578-274)

Fuel Tank Strap Set

from

$59.99
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:
  • Direct replacement – this fuel tank strap matches the fit, function and performance of the original part.
  • Ideal solution – recommended for replacement when the fuel tank is serviced or replaced.
  • Durable construction – manufactured from quality materials for superior service and reliability
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPA1017)

Fuel Injection Pressure Sensor

from

$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

GM Genuine Parts – Oxygen Sensor: 4 Wires, 244.5 mm Long, Heated, Exact Fit (Part No.213-802)

Oxygen Sensor: 4 Wires, 244.5 mm Long, Heated, Exact Fit

from

$89.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Detects oxygen content in the exhaust gases to help optimize emissions
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – FUEL FEED PIPE (Part No.904-050)

FUEL FEED PIPE

from

$93.99
This fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications.
  • Restores functionality – reliable replacement for an original part that has failed due to heat or vibration
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Oxygen Sensor Connector (Part No.PTA1517)

Oxygen Sensor Connector

from

$53.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Locking Fuel Cap: 10511, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10511)

Locking Fuel Cap: 10511, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$27.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Vapor Canister Vent Solenoid Connector (Part No.PTA1066)

Vapor Canister Vent Solenoid Connector

from

$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

GM Genuine Parts – Secondary Air Injection Check Valve (Part No.12639108)

Secondary Air Injection Check Valve

from

$279.99
GM Genuine Parts Secondary Air Injection Check Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves help prevent exhaust gases from flowing back through the air injection system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent exhaust from entering air pump
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Upgrade your 2013 Chevrolet Impala with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2013 Chevrolet Impala, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Impala functioning at its best. At Advance Auto Parts, we offer a wide selection of 97 Fuel and Emissions Systems for the 2013 Chevrolet Impala, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2013 Chevrolet Impala at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $4.49 to $1,012.93, with an average price of $114.77. Our 97 Fuel and Emissions Systems in stock come from 15 trusted brands, so you’re sure to find the right part for your 2013 Chevrolet Impala without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Chevrolet Impala, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch, Carquest Premium, GM Genuine, and more. Bosch Fuel and Emissions Systems start at just $39.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and GM Genuine also bring quality to the table, with Fuel and Emissions Systems available starting at $5.79, and at an average 4 stars rating. With 1,672 customer reviews and counting, our 2013 Chevrolet Impala Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2013 Chevrolet Impala is always ready to roll. We’re committed to providing you with everything you need to keep your Impala in top shape, all in one place. Start shopping confidently below for your 2013 Chevrolet Impala!

Best-Selling Oxygen Sensors for 2013 Chevrolet Impalas

Enhance the driving experience in your Chevrolet with 9 quality Oxygen Sensor components, starting at $34.99.

Walker – Walker Oxygen Sensor (Part No.C5010380306WKR)

Walker Oxygen Sensor

from

$65.44
Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.

Product Features:
  • Improved Engine Response and Performance
  • Lower Emissions
  • Improved Fuel Economy
  • Longer Sensor Life
  • Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install
See More

Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)

Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal

from

$80.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

GM Genuine Parts – Heated Oxygen Sensor (Part No.12634061)

Heated Oxygen Sensor

from

$69.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Detects oxygen content in the exhaust gases to help optimize emissions
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Bosch – Oxygen Sensor: 4 Wire, 12.2" Long, Heated, Exact Fit (Part No.16454)

Oxygen Sensor: 4 Wire, 12.2" Long, Heated, Exact Fit

from

$61.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

NTK – Switching Oxygen Sensor: 4 Wire, 20.5" Long, Heated, Direct Fit (Part No.21556)

Switching Oxygen Sensor: 4 Wire, 20.5" Long, Heated, Direct Fit

from

$79.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

DENSO – Oxygen Sensor: 4 Wire, 12.24" Long, Heated, Exact Fit (Part No.234-4815)

Oxygen Sensor: 4 Wire, 12.24" Long, Heated, Exact Fit

from

$104.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

ACDelco – GM Original Equipment Oxygen Sensor (Part No.C5010426706ACD)

GM Original Equipment Oxygen Sensor

from

$99.22
The ACDelco GM Original Equipment Oxygen (O2) Sensor is a GM-recommended replacement for your vehicle’s original component. The Oxygen (O2) Sensor is a special feedback sensor on your vehicle’s exhaust system. This sensor measures the proportion of oxygen in the exhaust gases. Using this measurement, the engine management computer can adjust the air/fuel ratio near the optimum value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. This original equipment oxygen sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. When you are looking for a match to GM Original Equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done.

Product Features:
  • Detect oxygen content in the exhaust gases to optimize emissions and fuel economy
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

DENSO – Oxygen Sensor: 4 Wire, 14.76" Long, Heated, Exact Fit (Part No.234-4441)

Oxygen Sensor: 4 Wire, 14.76" Long, Heated, Exact Fit

from

$76.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Carquest Premium – Oxygen Sensor Connector (Part No.PTA1685)

Oxygen Sensor Connector

from

$34.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Most Popular 2013 Chevrolet Impala Fuel Injectors

Customize your Chevrolet with 21 Fuel Injectors products like Air Flow Meters and Mass Air, Fuel Injector Gaskets, and Fuel Injectors, all priced under $229.18.

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0120)

Air Flow Sensor - New Actual OE Part

from

$75.99
Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:
  • Hitachi is a Tier 1 OE supplier for air flow sensors
  • 100% NEW, never remanufactured
  • Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
  • Precision manufactured and assembled sensing elements for accurate air flow measurements
See More

Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 97241)

UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET

from

$26.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)

Nylon Nut - 1/4 In. (No.14)

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6396)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$89.99
CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

ACDelco – Direct Fuel Injector Assembly (Part No.12634126)

Direct Fuel Injector Assembly

from

$136.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61699)

Fuel Injection Throttle Body Mounting Gasket

from

$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Each gasket set is built to meet or exceed all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

Fuel Pressure Relief Valve Cap

from

$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Direct Fuel Injector Assembly (Part No.12634123)

Direct Fuel Injector Assembly

from

$127.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Fuel Injector (Part No.C1000510194ACD)

Fuel Injector

from

$229.18
Fuel Injector

ACDelco – Fuel Feed Pipe (Part No.12681113)

Fuel Feed Pipe

from

$201.99
ACDelco GM Original Equipment Fuel Feed Line is a GM-recommended replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This original equipment line will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – GM Original Equipment Air Mass Sensor (Part No.B3150756035ACD)

GM Original Equipment Air Mass Sensor

from

$171.33
An ACDelco GM Original Equipment Air Mass Sensor is a key part of the engine management system, and is a GM-recommended replacement for your vehicle’s original component. The Air Mass Sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. This original equipment mass air flow sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Measure the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – GM Original Equipment Fuel Injector O-Ring Kit (Part No.C1013431798ACD)

GM Original Equipment Fuel Injector O-Ring Kit

from

$168.18
The ACDelco GM Original Equipment Fuel Injector O-Ring Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Hitachi – Fuel Injector (Part No.C1000510194HIT)

Fuel Injector

from

$136.01
Fuel Injector

GM Genuine Parts – Fuel Injector O-Ring Kit with Seals and Spacers (Part No.217-3399)

Fuel Injector O-Ring Kit with Seals and Spacers

from

$125.99
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps provide a seal to prevent fuel leaks
  • Helps seal combustion chamber from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – GDI SEAL TOOL KIT (Part No.ATK-001)

GDI SEAL TOOL KIT

from

$119.99
GDI SEAL TOOL KIT

Dorman – FUEL FEED PIPE (Part No.904-050)

FUEL FEED PIPE

from

$93.99
This fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications.
  • Restores functionality – reliable replacement for an original part that has failed due to heat or vibration
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A511-1033)

Remanufactured Fuel Injector

from

$81.99
Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new o-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A511-1213)

Remanufactured Fuel Injector

from

$80.99
CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:
  • Each unit is 100% tested to OE specifications.
  • Includes new o-rings and seals made of premium OE quality materials.
  • Includes application specific technical bulletin, where applicable.
See More

Felpro – FUEL INJECTOR O-RING SET (Part No.ES 73135)

FUEL INJECTOR O-RING SET

from

$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS068)

Fuel Injector Seal Kit

from

$20.99
CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials.
  • Services one injector.
See More

ACDelco – FI Throttle Body Mou (Part No.C7001534596ACD)

FI Throttle Body Mou

from

$14.33
FI Throttle Body Mou

Top Picks for 2013 Chevrolet Impala Fuel Pumps

Upgrade Chevrolet Impalas with top-quality Fuel Pumps parts, including 13 OEM and aftermarket selections for your 2013 model.

GM Genuine Parts – Fuel Pump (Part No.HPM1029)

Fuel Pump

from

$253.99
GM Genuine Parts Mechanical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These help provide a steady, reliable supply of fuel for your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps provide a steady, reliable supply of fuel for your vehicle’s engine
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

INA – Fuel Pump Tappet (Part No.E3013418177INA)

Fuel Pump Tappet

from

$41.35
Fuel Pump Tappet

ACDelco – GM Original Equipment Fuel Pump Control Module (Part No.E3006582160ACD)

GM Original Equipment Fuel Pump Control Module

from

$1012.93
The ACDelco GM Original Equipment Fuel Pump Control Module regulates the voltage supply to the electric fuel pump, and is a GM-recommended replacement for your vehicle’s original component. The control module receives an electrical signal from the engine control module that determines the voltage applied to the pump – this alters the pump motor speed and fuel pressure. This original equipment fuel pump control module has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1511)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$483.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Delphi – Direct Injection High Pressure Fuel Pump: With Gasket (Part No.HM10007)

Direct Injection High Pressure Fuel Pump: With Gasket

from

$446.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
  • Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
  • Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
  • Meets OE specifications
See More

ACDelco – GM Original Equipment Electric Fuel Pump Assembly (Part No.E3001582093ACD)

GM Original Equipment Electric Fuel Pump Assembly

from

$829.53
The ACDelco Electric Fuel Pump Assembly and their related components are designed to meet the highest standards in the industry. This helps to ensure their ability to provide impressive fuel delivery performance, quick engine starts and continuous fuel supply, minimum noise and vibration, long-lasting durability and easy installation and fit. The ACDelco Fuel Pump is manufactured in ISO-9001 and QS-9000 registered facilities, quality is assured and backed by competitive warranty coverage.

Product Features:
  • Hybrid Modular Reservoir Assembly (MRA)
  • Latest fuel level sensor design eliminates failures due to worn fingers on sensor wiper arm, sulfur contamination, wire wound sensors and lead sensor kits
  • Improved electrical connections that eliminate below-cover burning due to vehicle vibration over previous designs
  • Improved pump design to increase pump life and reduce pump noise over previous designs
  • Pump changed from a roller vane design to a ge-rotor design
  • The ACDelco fuel pump line includes: electric (in-line and in-tank), modular assemblies and mechanical pumps.
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1510)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$485.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Carquest Premium – Fuel Pump Module Assembly M2542423: Fuel Pump, Sending Unit and Strainer (Part No.M2542423)

Fuel Pump Module Assembly M2542423: Fuel Pump, Sending Unit and Strainer

from

$372.99
Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

GM Genuine Parts – Fuel Pump (Part No.HPM1043)

Fuel Pump

from

$223.99
GM Genuine Parts Direct Injection High Pressure Fuel Pump are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps provide a steady, reliable supply of fuel for your vehicle’s engine
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Fuel Pump Driver Module – OE Fix (Part No.601-130)

Fuel Pump Driver Module - OE Fix

from

$195.99
If your GM vehicle starts hard, stalls or is running poorly, it could be because of a failing fuel pump driver module. But when the factory module fails on select models, the dealership’s replacement part requires expensive calibration and programming. This time-saving Dorman OE FIX replacement is pre-programmed for an easier and more predictable installation. It also features a thermal- and vibration-tested backing plate for greater resistance to corrosion, and upgraded active electronic components for added reliability.

Product Features:
  • Pre-programmed replacement – this fuel pump driver module for GM vehicles directly replaces the original and requires no programming for installation
  • Upgraded design – module features enhanced microcontroller and new active electronic components for added reliability
  • Durable construction – module housing is thermal- and vibration-tested, with a powder-coated aluminum backing plate for corrosion resistance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Pump Driver Module (Part No.FPE1096)

Fuel Pump Driver Module

from

$152.99
Fuel Pump Driver Module

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Fuel Cap Tester Adapter

from

$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

ACDelco – Fuel Pump O-Ring (Part No.E3040421238ACD)

Fuel Pump O-Ring

from

$24.06
Fuel Pump O-Ring

In-Demand Gas Caps for 2013 Chevrolet Impalas

Select from 3 premium Gas Caps parts for your 2013 Chevrolet Impala, with prices ranging from $20.79 to $30.49.

Carquest Premium – Fuel Cap: 10839, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10839)

Fuel Cap: 10839, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$20.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Tethered Locking Fuel Cap: 10509, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10509)

Tethered Locking Fuel Cap: 10509, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$30.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Motorad – Tethered Fuel Cap (Part No.MGC838T)

Tethered Fuel Cap

from

$27.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Most Sold 2013 Chevrolet Impala Air Flow Sensors

Explore our best-selling Chevrolet parts for the 2013 Impala among 11 OEM and aftermarket options starting from $7.58.

NTK – Manifold Absolute Pressure Sensor (Part No.MA0205)

Manifold Absolute Pressure Sensor

from

$49.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
  • The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1028)

Manifold Absolute Pressure Sensor (MAP)

from

$36.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

NTK – Ambient Air Temperature Sensor (Part No.AN0115)

Ambient Air Temperature Sensor

from

$12.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Ambient Air Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper reading of outside air temperature.
  • The Ambient Air Temperature Sensor measures outside air temperature and is used by the heating and cooling control system, along with other vehicle cabin sensors, to control temperature and blower speed.
See More

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1034)

Ambient Air Temperature Sensor

from

$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Bosch – Manifold Absolute Pressure Sensor (Part No.0261230289)

Manifold Absolute Pressure Sensor

from

$39.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:
  • Bosch OE quality pressure sensors for accurate measurements
  • Bosch OE quality pressure sensors for long term stability
  • Bosch OE quality pressure sensors with a short response time
  • Bosch OE quality pressure sensors with improved media resistance
See More

DENSO – Oxygen Sensor (Part No.C5010690280ND)

Oxygen Sensor

from

$105.43
Oxygen Sensor

DENSO – Oxygen Sensor (Part No.C5010690346ND)

Oxygen Sensor

from

$75.19
Oxygen Sensor

Bosch – Oxygen Sensor (Part No.C5010956268BOS)

Oxygen Sensor

from

$66.50
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

ACDelco – GM Original Equipment Manifold Absolute Pressure Sensor (Part No.C7044559872ACD)

GM Original Equipment Manifold Absolute Pressure Sensor

from

$62.40
The ACDelco GM Original Equipment Multi-Purpose Pressure Sensor converts mechanical force into an electrical signal, and is a GM-recommended replacement for your vehicle’s original component. It monitors the pressure of various system fluids in your vehicle. This original equipment multi-purpose pressure sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Ambient Temp Sensor (Part No.P4025360720ACD)

Ambient Temp Sensor

from

$39.58
Ambient Temp Sensor

ACDelco – Ambient Temp Sensor (Part No.P4025360741ACD)

Ambient Temp Sensor

from

$7.58
Ambient Temp Sensor

Top-Rated Fuel and Emissions Systems Brands For Your 2013 Chevrolet Impala

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2013 Chevrolet Impalas. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, Carquest Premium, and GM Genuine, and more. Fuel and Emissions Systems from these brands that fit a 2013 Impala start at just $5.79 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 2013 Chevrolet Impala Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2013 Chevrolet Impala, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 2013 Chevrolet Impala. With over 4 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $39.99, with an average price of just $62.37. Plus, with over 144 customer reviews and an average rating of 5 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Manifold Absolute Pressure Sensor
from
$39.99
This product is not rated

Manifold Absolute Pressure Sensor

“”

Oxygen Sensor: 4 Wire, 12.2" Long, Heated, Exact Fit
from
$61.99
This product is not rated

Oxygen Sensor: 4 Wire, 12.2" Long, Heated, Exact Fit

“”

Oxygen Sensor
from
$66.5
This product is not rated

Oxygen Sensor

“”

Popular Carquest Premium 2013 Chevrolet Impala Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2013 Chevrolet Impala owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2013 Impala, Advance Auto Parts carries a full inventory of 23 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $11.99 to $372.99, plus, with more than 52 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

Vapor Canister Purge Solenoid
from
$63.99
This product is not rated

Vapor Canister Purge Solenoid

“”

Vapor Canister Vent Solenoid
from
$55.99
This product is not rated

Vapor Canister Vent Solenoid

“”

Manifold Absolute Pressure Sensor (MAP)
from
$36.99
This product is not rated

Manifold Absolute Pressure Sensor (MAP)

“”

FAQs for 2013 Chevrolet Impala Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2013 Chevrolet Impalas?

Out of 97 Fuel and Emissions Systems that fit 2013 Chevrolet Impalas, the following parts are the top sellers:

What’s the price range for 2013 Chevrolet Impala Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2013 Chevrolet Impala start at $4.49 and go up to $1,012.93 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2013 Chevrolet Impala?

The average price for Fuel and Emissions Systems for the 2013 Chevrolet Impala is $114.77. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Impala model years?

Yes, we currently carry Fuel and Emissions Systems for 51 model years of Chevrolet Impalas between 1958 and 2020. Fuel and Emissions Systems are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2012, and 2011.

What are the cheapest Fuel and Emissions Systems for my 2013 Chevrolet Impala?

The cheapest 2013 Chevrolet Impala Fuel and Emissions Systems we carry in stock are:

What types of Fuel and Emissions Systems do you sell for my 2013 Chevrolet Impala?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2013 Chevrolet Impala:

Can I get help with 2013 Chevrolet Impala Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.

What is your return policy for Chevrolet Impala Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Impala Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.