2013 Chevrolet Express 3500 Fuel and Emissions Systems

Name: Water in Fuel (WiF) Sensor
Brand: Carquest Premium
SKU: FSA1058
Price: 195.99 USD

Below you will find various in-demand Chevrolet Fuel and Emissions Systems, components and accessories for your 2013 Express 3500. Advance Auto Parts has popular Express 3500 parts like Air Flow Sensors, Oxygen Sensors, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Express 3500 model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2013 Chevrolet Express 3500 Fuel and Emissions Systems below and start saving instantly.

Popular 2013 Chevrolet Express 3500 Fuel and Emissions Systems Categories

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Air Flow Meters and Mass Air

Gas Caps

Vacuum Pumps

Fuel Pumps

Diesel Exhaust Fluid (DEF) Heaters

Oxygen Sensors

Vapor Canister Purge Valves

Vapor Canister Vent Solenoids

Fuel Lift Pumps

Fuel Injection Pumps

Fuel Injector Rails

Fuel Injection Pressure Sensors

MAP-Barometric Pressures

Vacuum Reservoirs

Vapor Canister Vent Valves

Secondary Air Injection Pipe Retainer

Manifold Air Pressure Sensors

Canister Purge Solenoids

Fuel Injectors

Fuel Tank Sender Retainers

Vapor Canisters

EGR Coolers

Ambient Air Temperature Sensor Connectors

Fuel Tank Pressure Sensors

Fuel Pressure Relief Valve Caps

Water In Fuel Sensors

Pressure Regulators

Flex Fuel Sensors

Diesel Emissions Fluid Pumps

Ambient Air Temperature Sensors

Diesel Emissions Fluid Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

Fuel Tank Lock Rings

Fuel Tank Filler Necks

Fuel Tank Vent Valves

Hydrocarbon Injectors

Fuel Level Sensors

Vapor Canister Vent Hoses

Mass Air Flow Sensor Connectors

Fuel Injection Fuel Rails

Diesel Fuel Injector Lines

Fuel Pump Tank Seals

Diesel Emissions Filler Caps

Oxygen Sensor Connectors

Fuel Feed Lines

EGR Valve Gaskets

Fuel Injection Fuel Rail Stud

Diesel Exhaust Fluid (DEF) Modules

Vapor Canister Purge Valve Pipes

Ambient Air Temperature Sensor Clip

EGR Valve Temperature Sensors

Exhaust Gas Recirculation (EGR) Pipe Seals

Fuel Rail Pressure Relief Valves

Exhaust Gas Recirculation (EGR) Pipe Gaskets

Fuel Tank Sending Unit O-Rings

Fuel Pressure Sensor Covers

Fuel Injection System

Fuel Cap Tester Adapters

Fuel Sender Connectors

Air Injection Bypass Valve Solenoid Connector

Diesel Primer Pump Gasket

Air Injection Bleeder Valve Solenoid Connector

Fuel Injector Vacuum Switches

Fuel Injector and Insulator Retainer Kits

Essential Fuel and Emissions Systems for 2013 Chevrolet Express 3500s

from

$195.99

On Flex Fuel Vehicles (FFV) and diesel vehicle applications the engine control module (ECM) monitors the fuel for possible water contamination. The sensor generates a small alternating voltage to detect the presence of water as well as the percentage of H2O content.

from

$21.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Product Features:

Manufactured from durable, long-life materials
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$115.99

GM Genuine Parts Vapor Canister Vent Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$4.99

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$1.59

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$756.99

This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:

Direct replacement – this EGR cooler is made to match the fit and function of the original part on specific applications
Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$68.99

CARQUEST premium fuel lines meet or exceed critical OE performance specifications for sealing and burst pressure. The fuel line must be replaced any time the line is removed, or when the injector is serviced. This complete kit includes the line and components necessary to reseal the injector.

Product Features:

Premium OE quality materials
Cylinder specific exact-fit geometry ensures a leak free connection
Precision machined fittings with corrosion resistant plating

from

$95.99

Precision is key for the fuel pressure regulator on any vehicle. At Delphi, we use OE engineering to test our regulators and fuel technologies to ensure the utmost performance and durability. Our Nitrile¿ diaphragms are resilient against high-ethanol fuels, and we utilize two designs to help meet emissions standards while covering a wide array of domestic vehicles. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management. Visit our Resource Center for helpful tips and tricks on fuel pumps technologies and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$11.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$70.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump

from

$13.99

GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$165.99

GM Genuine Parts Diesel Emissions Fluid Level Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$186.99

This vapor canister has been made to match the original equipment evap canister on certain vehicle years, makes and models, properly restoring emissions controls.

Product Features:

Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles
Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$91.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$108.99

The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

Each unit is 100% tested to OE specifications
Includes new o-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable
Includes all necessary components to service the complete bank of injectors

from

$19.49

A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

from

$212.99

Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$204.99

This fuel injection fuel rail pressure relief valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance..

Product Features:

Direct replacement – this fuel injection fuel rail pressure relief valve is designed to match the fit and function of the original valve on specified vehicles.
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$222.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
End of line testing using the exact OE test specifications.
Guaranteed to provide OE performance and meet all emission specifications.
Continuous improvement, manufactured with the latest upgrades to components and specifications.

from

$281.99

This diesel exhaust fluid (DEF) pump matches the fit and function of the original part. Designed as a plug-and-play replacement, this DEF pump has undergone extensive testing and is made of quality components for reliable service.

Product Features:

Ideal replacement – this DEF pump matches the fit and function of the original pump for a plug-and-play replacement
Durable construction – this DEF pump is made of quality components and materials for durability
Cost-effective solution – offers original equipment function at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$9.99

GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$38.99

Product Features:

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$37.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$609.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.End of line testing using the exact OE test specifications.Guaranteed to provide OE performance and meet all emission specifications.Continuous improvement, manufactured with the latest upgrades to components and specifications.

Product Features:

100% of pumps are end of line tested using the exact OE test specifications and equipment
Remanufactured pumps include all OE updates, so they can often be superior to the OE pumps that they replace
Manufactured using all OE tools and processes
Remanufactured Pumps receive new OE parts for all wearable or critical components

from

$2500.99

The Edelbrock Pro-Flo 4 EFI Kit No. 35780 for Small-Block Chevy engines with Vortec/E-Tec cylinder heads is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors are included along with wire harnesses and ECU. The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. The manifold is also 0.75 inch taller than the standard LS3 version to promote smoother airflow into the rectangular-port heads. This kit uses 29 lb/hr injectors and is rated for 450 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner application’s initial programming. Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner App then selects the most appropriate base calibration. Once the base calibration is set, the self-learning E-Tuner App takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather. The E-Tuner App provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

Product Features:

High-performance Victor-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body.
All supporting sensors are included along with wire harnesses and ECU.
The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications.
The manifold is also 0.75 inch taller than the standard LS3 version to promote smoother airflow into the rectangular-port heads.
This kit uses 29 lb/hr injectors and is rated for 450 horsepower at 58 PSI of fuel pressure.
Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner application’s initial programming.
Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner App then selects the most appropriate base calibration.
Once the base calibration is set, the self-learning E-Tuner App takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather.
The E-Tuner App provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for.
The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

from

$44.99

This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
Durable construction – recommended for replacement when the fuel pump or sensor is replaced
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$59.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

Upgrade your 2013 Chevrolet Express 3500 with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2013 Chevrolet Express 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Express 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 175 Fuel and Emissions Systems for the 2013 Chevrolet Express 3500, designed to meet your needs without breaking the bank. From Air Flow Sensor replacements to Oxygen Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2013 Chevrolet Express 3500 at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $0.99 to $2,866.99, with an average price of $137.78. Our 175 Fuel and Emissions Systems in stock come from 15 trusted brands, so you’re sure to find the right part for your 2013 Chevrolet Express 3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Chevrolet Express 3500, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO, GM Genuine, Carquest Premium, and more. FELPRO Fuel and Emissions Systems start at just $3.29 and boast an impressive 4.6 stars average rating from customers. GM Genuine and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $15.79, and at an average 4.5 stars rating. With 5,450 customer reviews and counting, our 2013 Chevrolet Express 3500 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2013 Chevrolet Express 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your Express 3500 in top shape, all in one place. Start shopping confidently below for your 2013 Chevrolet Express 3500!

Best-Selling Air Flow Sensors for 2013 Chevrolet Express 3500s

Enhance the driving experience in your Chevrolet with 10 quality Air Flow Sensor components, starting at $0.99.

show more show less

from

$4.99

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$34.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$61.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$63.99

The Premium CarQuest Vehicle Solutions line is designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Relief Valve is used in the automotive air conditioning system to prevent unusual over-pressure that may cause damage to critical components within the system or to the system as a whole. By opening it’s valve when the system pressure exceeds the preset pressure levels and closing when the internal pressure decreases to the preset pressure levels, proper factory designated system pressures are maintained.

Product Features:

Made to OE spec to ensure a proper fit, form and function.
Sensors are engineered for precision performance, durability and a long service life.
All units are tested using advanced end-of-line testing equipment that pressurizes the A/C Pressure Relief Valve and checks functionality to ensure each A/C Pressure Relief Valve meets manufacturing specifications before packaging.

from

$54.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$100.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$75.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$31.49

GM Genuine Parts Manifold Absolute Pressure (MAP) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Sends signals to the engine controls for optimal engine performance
Designed to adjust engine performance to various altitudes
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$16.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$0.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

Most Popular 2013 Chevrolet Express 3500 Oxygen Sensors

Customize your Chevrolet with 14 Oxygen Sensors products like Oxygen Sensors and Oxygen Sensor Connectors, all priced under $165.99.

show more show less

from

$97.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$103.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$89.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$69.99

NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$115.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$76.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$127.99

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$165.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the airfuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming andor special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$87.99

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$109.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the airfuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming andor special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$96.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$83.99

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$47.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$34.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Top Picks for 2013 Chevrolet Express 3500 Fuel Pumps

Upgrade Chevrolet Express 3500s with top-quality Fuel Pumps parts, including 17 OEM and aftermarket selections for your 2013 model.

show more show less

from

$70.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump

from

$326.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$305.99

GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a reliable fuel supply to your vehicle’s engine
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$245.99

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$678.99

Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$1557.00

100% of pumps are end of line tested using the exact OE test specifications and equipment
Manufactured with the latest OE updates, so they can often be superior to the parts they replace
Manufactured using all OE tools and processes
Guaranteed to provide OE performance

from

$1053.99

REMAN DIESEL PUMP

from

$918.99

FUEL PMP MDULE ASMBY

from

$609.99

100% of pumps are end of line tested using the exact OE test specifications and equipment
Remanufactured pumps include all OE updates, so they can often be superior to the OE pumps that they replace
Manufactured using all OE tools and processes
Remanufactured Pumps receive new OE parts for all wearable or critical components

from

$546.99

Helps provide a reliable fuel supply to your vehicle’s engine
Electrical connections are designed to help eliminate high resistance due to vehicle vibration
Designed to optimize pump life and reduce fuel pump noise
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$526.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$480.99

Helps provide a reliable fuel supply to your vehicle’s engine
Electrical connections are designed to help eliminate high resistance due to vehicle vibration
Designed to optimize pump life and reduce fuel pump noise
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$472.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$429.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$58.99

This fuel sender connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel sender connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

In-Demand Gas Caps for 2013 Chevrolet Express 3500s

Select from 25 premium Gas Caps parts for your 2013 Chevrolet Express 3500, with prices ranging from $7.99 to $31.99.

show more show less

from

$15.79

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$11.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$16.79

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$22.99

Product Features:

Independently tested for emission control
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$12.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Independently tested for emission control
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$12.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$7.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$17.49

Product Features:

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$31.99

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$24.29

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$10.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$11.79

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$22.99

Product Features:

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$20.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$18.79

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Most Sold 2013 Chevrolet Express 3500 Fuel Injectors

Explore our best-selling Chevrolet parts for the 2013 Express 3500 among 34 OEM and aftermarket options starting from $6.29.

show more show less

from

$66.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$9.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$14.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$77.99

Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$131.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$8.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$122.99

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
Delphi OE technology validated to match the vehicle applications

from

$7.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$61.99

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$120.99

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$69.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$125.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$54.99

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$27.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$6.29

GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$129.99

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$13.79

GM Genuine Parts Fuel Injector and Insulator Retainer Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$289.99

GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient air/fuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$129.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
End of line testing using the exact OE test specifications.
Guaranteed to provide OE performance and meet all emission specifications.
Continuous improvement, manufactured with the latest upgrades to components and specifications.

from

$90.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$41.99

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$36.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$261.99

This hydrocarbon injector (HCI), also called an aftertreatment doser, is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this hydrocarbon injector (HCI) matches the fit and function of the factory part on specified years, make and models
Ideal solution – this hydrocarbon injector is a reliable replacement for an original part that has failed due to wear, corrosion or fouling
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$28.49

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

Top-Rated Fuel and Emissions Systems Brands For Your 2013 Chevrolet Express 3500

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2013 Chevrolet Express 3500s. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, GM Genuine, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2013 Express 3500 start at just $3.29 and are rated as high as 4.6 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2013 Chevrolet Express 3500 Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2013 Chevrolet Express 3500, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 2013 Chevrolet Express 3500. With over 3 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.29, with an average price of just $9.42. Plus, with over 18 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $9.99

(14)

Fuel Injector O-Ring Kit

“I rebuilt my engine using a off-brand gasket kit. The O-rings that came with the kit did not fit right. I bought these from Advance. They were Felp”

from $14.99

(3)

Fuel Injection Throttle Body Mounting Gasket

“Perfect fit for a lot less money.”

from $3.29

(1)

Exhaust Gas Recirculation (EGR) Valve Gasket

“Installed on my 99 Silverado Z71. Perfect fit and good price.”

Popular GM Genuine 2013 Chevrolet Express 3500 Fuel and Emissions Systems

GM Genuine auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2013 Chevrolet Express 3500 owner should feel confident when installing genuine GM Genuine parts in their vehicle. To ensure the best fit and performance for your 2013 Express 3500, Advance Auto Parts carries a full inventory of 3 GM Genuine Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these GM Genuine Fuel and Emissions Systems range from $39.99 to $269.99, plus, with more than 20 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $39.99

(1)

Vapor Canister Vent Solenoid

“01 Impala needed vent valve solenoid due to the stock one checking bad. Quality AC Delco part fit perfect and solved problem.”

from $68.99

(18)

Vapor Canister Purge Valve

“Was just what I needed. Cleared my code.”

from $269.99

(1)

Vapor Canister

“Oem part”

FAQs for 2013 Chevrolet Express 3500 Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2013 Chevrolet Express 3500s?

Out of 175 Fuel and Emissions Systems that fit 2013 Chevrolet Express 3500s, the following parts are the top sellers:

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Fuel Injector O-Ring Kit (3504360) – $8.49
Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (19370039) – $89.99

What’s the price range for 2013 Chevrolet Express 3500 Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2013 Chevrolet Express 3500 start at $0.99 and go up to $2,866.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2013 Chevrolet Express 3500?

The average price for Fuel and Emissions Systems for the 2013 Chevrolet Express 3500 is $137.78. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Express 3500 model years?

Yes, we currently carry Fuel and Emissions Systems for 28 model years of Chevrolet Express 3500s between 1996 and 2025. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Fuel and Emissions Systems for my 2013 Chevrolet Express 3500?

The cheapest 2013 Chevrolet Express 3500 Fuel and Emissions Systems we carry in stock are:

Nylon Shield Retainer- Ford and GM (sold by each) (10916178) – $0.99
Rivet-Push In-Hole Diameter .250 In. (sold by each) (22142348) – $1.59
Exhaust Gas Recirculation (EGR) Valve Gasket (15780617) – $2.79
Exhaust Gas Recirculation (EGR) Valve Gasket (15780238) – $3.29
Exhaust Gas Recirculation (EGR) Valve Gasket (15780239) – $3.79

What are the top-rated Fuel and Emissions Systems that fit the 2013 Chevrolet Express 3500?

Out of 5,450 reviews by customers, our 2013 Chevrolet Express 3500 Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2013 Chevrolet Express 3500 and their top-rated products:

Vapor Canister Purge Valves
- Vapor Canister Vent Solenoid (11680466) – $39.99
- Vapor Canister (15730288) – $269.99
- Vapor Canister Purge Valve (18057381) – $68.99

What types of Fuel and Emissions Systems do you sell for my 2013 Chevrolet Express 3500?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2013 Chevrolet Express 3500:

Can I get help with 2013 Chevrolet Express 3500 Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.

What is your return policy for Chevrolet Express 3500 Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Express 3500 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2013 Chevrolet Express 3500 Fuel and Emissions Systems

Carquest Premium – Water in Fuel (WiF) Sensor (Part No.FSA1058)

Carquest Premium – Fuel Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10841)

GM Genuine Parts – Vapor Canister Vent Hose (Part No.25815739)

Dorman – Metal Clip Nut No.8 (Part No.961-304D)

Dorman – Rivet-Push In-Hole Diameter .250 In. (sold by each) (Part No.700-579)

Dorman – Exhaust Gas Recirculation Cooler (Part No.904-938)

Carquest Premium – Fuel Injector High Pressure Line (Part No.AL034)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10021)

Victor Reinz – EGR Valve Gasket (Part No.71-14089-00)

Delphi – Electric Fuel Lift Pump: 12V, With 2 Female Blade Terminals (Part No.HFP955)

GM Genuine Parts – Fuel Pump O-Ring (Part No.G41)

GM Genuine Parts – Diesel Emissions Fluid Level Sensor (Part No.20760381)

Dorman – Evaporative Emissions Charcoal Canister (Part No.911-297)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Temperature Sensor (Part No.EGA2471)

Carquest Premium – Reman GDI Fuel Injector (Part No.A511-1223)

Dorman – Fuel Pump Lock Ring (Part No.579-102)

Delphi – Mass Air Flow Sensor (Part No.AF10056)

Dorman – Fuel Injection Pressure Regulator (Part No.904-583)

Bosch – Fuel Rail (Part No.F00RL01027)

Dorman – Diesel Emission Fluid Pump (Part No.904-607)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

GM Genuine Parts – Fuel Injection Fuel Rail Bolt (Part No.12554211)

Carquest Premium – Vapor Canister Vent Solenoid: Includes Mounting Hardware and Filter (Part No.CPC1003)

GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)

Bosch – Common Rail Pump (Part No.0986437421)

Edelbrock – Pro-Flo 4 EFI 4150-Style Kit No. 35780 For Chevy Small-Block with Vortec/E-Tec Heads (Part No.35780)

Dorman – Fuel Tank O-Ring (Part No.911-245)

Carquest Premium – Air Charge Temperature Sensor (Part No.ECC1177)

Dorman – Metal Clip Nut No.8 (Part No.961-304D)

Carquest Premium – Multi-Use Connector (Part No.PTA1019)

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10247)

Carquest Premium – New MAP SENSOR (Part No.ECE1033)

GM Genuine Parts – Multi-Purpose Pigtail (Part No.PT1799)

Carquest Premium – Multi-Use Connector (Part No.PTA2174)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA1298)

GM Genuine Parts – Manifold Absolute Pressure (MAP) Sensor (Part No.25203477)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1165)

Dorman – Nylon Shield Retainer- Ford and GM (sold by each) (Part No.700-614)

NTK – Switching Oxygen Sensor: 4 Wire, 15" Long, Heated, Direct Fit (Part No.21059)

Bosch – Oxygen Sensor: 4 Wire, 14.96" Long, Heated, Exact Fit (Part No.15282)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15730)

NTK – Switching Oxygen Sensor: 4 Wire, 15" Long, Heated, Direct Fit (Part No.21067)

DENSO – Oxygen Sensor: 4 Wire, 14.76" Long, Heated, Exact Fit (Part No.234-4336)

GM Genuine Parts – Heated Oxygen Sensor (Part No.12637297)

GM Genuine Parts – Oxygen Sensor: 4 Wires, 265 mm Long, Heated, Exact Fit (Part No.213-4246)

GM Genuine Parts – Heated Oxygen Sensor (Part No.213-3632)

NTK – Switching Oxygen Sensor: 4 Wire, 21.75" Long, Heated, Direct Fit (Part No.21555)

GM Genuine Parts – Heated Oxygen Sensor (Part No.213-4244)

DENSO – Oxygen Sensor: Downstream, 4 Wire, 14.84" Long, Heated, Exact Fit (Part No.234-4243)

GM Genuine Parts – Heated Oxygen Sensor (Part No.12656071)

Carquest Premium – Multi-Use Connector (Part No.PTA1687)

Carquest Premium – Multi-Use Connector (Part No.PTA1685)

Delphi – Electric Fuel Lift Pump: 12V, With 2 Female Blade Terminals (Part No.HFP955)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1093)

GM Genuine Parts – Fuel Pump Module without Fuel Level Sensor, with Pressure Sensor and Seal (Part No.M100209)

Carquest Premium – Fuel Pump Module Assembly M3542427: Fuel Pump, Sending Unit and Strainer (Part No.M3542427)

Carquest Premium – Fuel Pump Module Assembly M2542430: Fuel Pump, Sending Unit and Strainer (Part No.M2542430)

Bosch – Common Rail Pump (Part No.0445010817)

Carquest Premium – REMAN DIESEL PUMP (Part No.AM91093)

GM Genuine Parts – FUEL PMP MDULE ASMBY (Part No.19420757)

Bosch – Common Rail Pump (Part No.0986437421)

GM Genuine Parts – Fuel Tank Fuel Pump Module Kit without Level Sensor, with Seal and Fuel Tank Pressure Sensor (Part No.19420747)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seals (Part No.FG2000)

GM Genuine Parts – Fuel Pump Module without Fuel Level Sensor, with Seal (Part No.M10265)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seals (Part No.FG2001)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M2542431)

Dorman – Fuel Sending Unit Pigtail (Part No.645-221)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

Carquest Premium – Diesel Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591D)

Carquest Premium – Locking Flex Fuel Tank Cap (Part No.10504Y)

Carquest Premium – Fuel Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830)

Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Tank Cap (Part No.10501)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10819)