2013 Chevrolet Cruze Belts and Hoses

Name: Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 30 1/2 Inch Length
Brand: Dayco
SKU: 88512
Price: 33.99 USD

Below you will find various in-demand Chevrolet Belts and Hoses, components and accessories for your 2013 Cruze. Advance Auto Parts has popular Cruze parts like Pulleys, Serpentine and V Belts, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other Cruze model years including 2011, 2012, 2014, 2015, 2016, 2017, 2018, 2019 and more. Select a category of 2013 Chevrolet Cruze Belts and Hoses below and start saving instantly.

Popular 2013 Chevrolet Cruze Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Radiator Coolant Hose O-Rings

Coolant Expansion Tank Hoses

Essential Belts and Hoses for 2013 Chevrolet Cruzes

from

$33.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$39.22

Heater Hose

from

$64.69

Radiator Hose

from

$62.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$188.99

Litens Automotive is one of two original equipment (O.E.) suppliers of this tensioner for G.M., Opel, and Saturn. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured in Canada by Litens to the same exacting specifications as the O.E. part. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. This tensioner maintains the integrated lift feature as well as the split-steel pulley design specified by the manufacturer for long life and trouble free performance. This tensioner replaces all O.E. designs for these vehicles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Split-Steel pulley
Professional Mechanics will change this tensioner in about 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$119.99

Litens was the Original Equipment (O.E.) supplier of this 2011-2014 Chevrolet Cruze,Sonic with 1.4L tensioner. This “OE Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. As with the original equipment part, this replacement tensioner is manufactured in Germany to the same exacting OE standards. This tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. Manufactured by the original equipment part supplier to ensure proper form, fit, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life
Rugged 6K rivetted split pulley design for long life
Installation instructions included

from

$38.76

ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Has a heat and ozone resistant cover to increase the life of the hose
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles

from

$35.57

Heater Hose

from

$19.99

The O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles and are engineered to help securely seal hose connections when an existing O-ring has failed.

Product Features:

Simple fix – this set of O-rings is specifically manufactured to replace the original lower radiator hose O-ring on specific vehicles.
Cost-effective repair – inexpensive alternative to dealership forcing an entire hose replacement just to replace an O-ring.
Application specific – made to match the original O-ring on certain Chevrolet Cruze vehicles from 2011 to 2014
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$111.99

GM Genuine Parts PCV Valve Tubing is designed, engineered, and tested to rigorous standards, and is backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$47.99

Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.

Product Features:

Ideal replacement – this PCV tubing replaces the original tubing on specified vehicle years, makes and models.
Durable materials – this PCV tubing is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$47.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$49.49

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$37.00

Expansion Tank Hose

from

$21.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$162.82

Radiator

from

$87.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$13.49

This engine oil cooler hose assembly matches the fit and function of the original equipment components for a reliable repair and restoration of proper coolant circulation between the oil cooler and engine..

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly.
Durable materials – this engine oil cooler hose assembly is made from quality materials for a reliable repair
Thoroughly tested – rigorous quality control ensure this hose assembly conforms to product standards
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$56.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly.
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler.
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$61.10

ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$37.61

Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:

Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
Precision molded teeth are protected by durable fabric facing for long life
Tensile cord is engineered and tested for maximum load carrying capabilities
Rubber backing resists abrasion, oil and heat

from

$30.36

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$82.71

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$20.79

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

Upgrade your 2013 Chevrolet Cruze with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2013 Chevrolet Cruze, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Belts and Hoses are key to keeping your Cruze functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Belts and Hoses for the 2013 Chevrolet Cruze, designed to meet your needs without breaking the bank. From Pulley replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2013 Chevrolet Cruze at great prices. Our Belts and Hoses inventory for this model ranges from just $2.49 to $203.41, with an average price of $55.53. Our 58 Belts and Hoses in stock come from 14 trusted brands, so you’re sure to find the right part for your 2013 Chevrolet Cruze without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Chevrolet Cruze, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Dorman, and more. Dayco Belts and Hoses start at just $12.22 and boast an impressive 5 stars average rating from customers. Litens and Dorman also bring quality to the table, with Belts and Hoses available starting at $13.49, and at an average 5 stars rating. With 410 customer reviews and counting, our 2013 Chevrolet Cruze Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2013 Chevrolet Cruze is always ready to roll. We’re committed to providing you with everything you need to keep your Cruze in top shape, all in one place. Start shopping confidently below for your 2013 Chevrolet Cruze!

Best-Selling Pulleys for 2013 Chevrolet Cruzes

Enhance the driving experience in your Chevrolet with 1 quality Pulley components, starting at $20.79.

show more show less

from

$20.79

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

Most Popular 2013 Chevrolet Cruze Serpentine and V Belts

Customize your Chevrolet with 15 Serpentine and V Belts products like Serpentine Belts and V-Belts, all priced under $49.49.

show more show less

from

$35.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$39.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$23.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$23.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$49.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$26.45

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$43.36

Drive Belt

from

$30.66

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$27.11

All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Polyester fiber tensile members and a ribbed belt design.

from

$45.59

Drive Belt

from

$39.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$38.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$34.10

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$31.42

Drive Belt

from

$29.26

Drive Belt

Top Picks for 2013 Chevrolet Cruze Belt Tensioners

Upgrade Chevrolet Cruzes with top-quality Belt Tensioners parts, including 7 OEM and aftermarket selections for your 2013 model.

show more show less

from

$119.99

Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life
Rugged 6K rivetted split pulley design for long life
Installation instructions included

from

$188.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Split-Steel pulley
Professional Mechanics will change this tensioner in about 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$131.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

from

$203.41

Acc. Belt Tensioner

from

$155.58

Built to look and fit like the original GM part, ACDelco Professional Automotive Belt Tensioner and Pulleys are an ideal replacement for worn equipment.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

from

$151.58

ACC. BELT TENSIONER

from

$115.99

This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

In-Demand Engine Cooling Hoses for 2013 Chevrolet Cruzes

Select from 6 premium Engine Cooling Hoses parts for your 2013 Chevrolet Cruze, with prices ranging from $19.99 to $162.82.

show more show less

from

$62.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$19.99

Simple fix – this set of O-rings is specifically manufactured to replace the original lower radiator hose O-ring on specific vehicles.
Cost-effective repair – inexpensive alternative to dealership forcing an entire hose replacement just to replace an O-ring.
Application specific – made to match the original O-ring on certain Chevrolet Cruze vehicles from 2011 to 2014
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$69.16

Has a heat and ozone resistant cover to increase the life of the hose
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles

from

$21.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$162.82

Radiator

from

$64.69

Radiator Hose

Most Sold 2013 Chevrolet Cruze Heater Hoses

Explore our best-selling Chevrolet parts for the 2013 Cruze among 13 OEM and aftermarket options starting from $12.99.

show more show less

from

$25.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$33.49

This replacement coolant overflow hose is engineered to match the fit and function of the original equipment overflow hose assembly. Manufactured from quality materials to withstand extreme temperature changes for a long service life.

Product Features:

Improved design – this OE FIX heater hose is redesigned to eliminate the fragile OE adapter to help make a secure connection and ensure longer service life.
Ideal replacement – this heater hose assembly replaces the original hose on specified vehicle years, makes and models for a complete repair.
Quality construction – made of durable materials to withstand extreme underhood conditions for excellent durability
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$22.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$51.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Upgraded material – this replacement engine heater hose assembly features an aluminum Y-connector for added durability.
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models.
Complete replacement – includes necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$12.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$33.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$62.63

Heater Hose

from

$59.65

Heater Hose

from

$49.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$39.22

Heater Hose

from

$35.60

HEATER HOSE

from

$29.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$15.99

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

Top-Rated Belts and Hoses Brands For Your 2013 Chevrolet Cruze

Shop for the best-rated brands offering Belts and Hoses and other products for your 2013 Chevrolet Cruzes. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Dorman, and more. Belts and Hoses from these brands that fit a 2013 Cruze start at just $12.22 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2013 Chevrolet Cruze Belts and Hoses

When it comes to maintaining or upgrading your 2013 Chevrolet Cruze, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2013 Chevrolet Cruze. With over 15 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.22, with an average price of just $37.67. Plus, with over 135 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$44.99

This product is not rated

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.5" Long, 1.09" Diameter

“”

from
$62.99

This product is not rated

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.5" Long, 1.34" Diameter

“”

from
$131.99

This product is not rated

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

“”

Popular Litens 2013 Chevrolet Cruze Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2013 Chevrolet Cruze owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2013 Cruze, Advance Auto Parts carries a full inventory of 2 Litens Belts and Hoses. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Litens Belts and Hoses range from $119.99 to $188.99, plus, with more than 3 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$188.99

This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

from
$119.99

(3)

Accessory Drive Belt Tensioner – Original Equipment Quality

“Simple to install, Price was a little high,”

FAQs for 2013 Chevrolet Cruze Belts and Hoses

Which Belts and Hoses are best-sellers for 2013 Chevrolet Cruzes?

Out of 58 Belts and Hoses that fit 2013 Chevrolet Cruzes, the following parts are the top sellers:

Molded Heater Hose: Rubber (12004105) – $33.49
Poly Rib Belt Serpentine Belt; 55.12 Long, 5 Rib Count (99982992) – $35.99
Accessory Drive Belt Tensioner – Original Equipment Quality (11562029) – $119.99

What’s the price range for 2013 Chevrolet Cruze Belts and Hoses?

Belts and Hose prices for the 2013 Chevrolet Cruze start at $2.49 and go up to $203.41 for the most premium parts.

What’s the average price of a Belts and Hose for a 2013 Chevrolet Cruze?

The average price for Belts and Hoses for the 2013 Chevrolet Cruze is $55.53. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chevrolet Cruze model years?

Yes, we currently carry Belts and Hoses for 8 model years of Chevrolet Cruzes between 2011 and 2019. Belts and Hoses are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2012, and 2011.

What are the cheapest Belts and Hoses for my 2013 Chevrolet Cruze?

The cheapest 2013 Chevrolet Cruze Belts and Hoses we carry in stock are:

Safety Stripe« Standard Straight Heater Hose (10504844) – $2.49
Dayco, Heater Hose (12075904) – $12.22
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 Inch Length (15590020) – $12.99
Turbocharger Coolant Line (12592668) – $13.49
Premium Molded Heater Hose (10510804) – $15.99

What are the top-rated Belts and Hoses that fit the 2013 Chevrolet Cruze?

Out of 410 reviews by customers, our 2013 Chevrolet Cruze Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2013 Chevrolet Cruze and their top-rated products:

Radiator Hoses
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.28" Diameter (5371988) – $25.99
Belt Tensioners
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.28" Diameter (5371988) – $25.99
Serpentine and V Belts
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.28" Diameter (5371988) – $25.99

What types of Belts and Hoses do you sell for my 2013 Chevrolet Cruze?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2013 Chevrolet Cruze:

Can I get help with 2013 Chevrolet Cruze Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Belts and Hoses and more.

What is your return policy for Chevrolet Cruze Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chevrolet Cruze Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2013 Chevrolet Cruze Belts and Hoses

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 30 1/2 Inch Length (Part No.88512)

Vaico – Heater Hose (Part No.R3030661166VCO)

Gates – Radiator Hose (Part No.G2000454808GAT)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.5" Long, 1.34" Diameter (Part No.E72714)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999416A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.950260A)

ACDelco – Professional Molded Coolant Hose (Part No.G2000583743ACD)

ACDelco – Heater Hose (Part No.R3030670165ACD)

Dorman – Lower Radiator Hose O-Ring (Part No.926-162)

GM Genuine Parts – Positive Crank Ventilation (PCV) Valve Pipe with Bypass Valve Tube (Part No.25193343)

Dorman – Help – PCV Tube Assembly (Part No.46829)

Gates – Micro-V« Serpentine Drive Belt (Part No.K050650)

Dayco – Poly Rib Belt Serpentine Belt; 57 Long, 6 Rib Count (Part No.5060570)

Vaico – Expansion Tank Hose (Part No.G2030670166VCO)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7.5" Long, 1.31" Diameter (Part No.B72819)

Autopart International Inc – Radiator (Part No.G10002026341API)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Dorman – Turbocharger Coolant Line (Part No.667-521)

Dorman – Turbocharger Coolant Feed Line (Part No.625-830)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578686ACD)

Bando – Precision Engineered V-Belt (Part No.W10001514356BAN)

Mitsuboshi – Drive Belt (Part No.W1000452357MBL)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000603864ACD)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 27mm Width, Smooth (Part No.89052)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 27mm Width, Smooth (Part No.89052)

Dayco – Poly Rib Belt Serpentine Belt; 55.12 Long, 5 Rib Count (Part No.5050551)

Dayco – Poly Rib Belt Serpentine Belt; 61.02 Long, 6 Rib Count (Part No.5060610)

Driveworks – Poly Rib Belt Serpentine Belt; 61.02 Long, 6 Rib Count (Part No.610K6)

Driveworks – Poly Rib Belt Serpentine Belt; 55.12 Long, 5 Rib Count (Part No.551K5)

Dayco – Poly Rib Belt Serpentine Belt; 57 Long, 6 Rib Count (Part No.5060570)

Bando – Multi Rib (Serpentine) Belt (Part No.W1000301094BAN)

Bando – Drive Belt (Part No.W10001529972BAN)

Mitsuboshi – Drive Belt (Part No.W1000532668MBL)

ContiTech – Drive V-Belt (Part No.W1000433669CON)

Bando – Drive Belt (Part No.W10002440667BAN)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060609)

Gates – Micro-V« Serpentine Drive Belt (Part No.K050570)

Mitsuboshi – Drive Belt (Part No.W10001529958MBL)

Bando – Drive Belt (Part No.W10002440669BAN)

Mitsuboshi – Drive Belt (Part No.W10001529808MBL)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.950260A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999416A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89637)

ACDelco – Acc. Belt Tensioner (Part No.G6001584604ACD)

ACDelco – Original Equipment Accessory Belt Tensioner Assembly (Part No.G6001954633ACD)

Worldpac – ACC. BELT TENSIONER (Part No.G6001954633BAN)

Dorman – Automatic Belt Tensioner (Part No.419-422)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.5" Long, 1.34" Diameter (Part No.E72714)

Dorman – Lower Radiator Hose O-Ring (Part No.926-162)

ACDelco – Professional Molded Coolant Hose (Part No.G2000583866ACD)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7.5" Long, 1.31" Diameter (Part No.B72819)

Autopart International Inc – Radiator (Part No.G10002026341API)

Gates – Radiator Hose (Part No.G2000454808GAT)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter (Part No.A71877)

Dorman – Molded Heater Hose: Rubber (Part No.626-609)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 1/2 Inch Length (Part No.87993)

Dorman – Molded Heater Hose: Plastic/Rubber, OE Fix, Upgraded Material (Part No.626-665)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 Inch Length (Part No.87627)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 30 1/2 Inch Length (Part No.88512)

ACDelco – Heater Hose (Part No.R3030515132ACD)

ACDelco – Heater Hose (Part No.R3030516025ACD)

Dorman – Molded Heater Hose: Metal/Rubber (Part No.626-679)

Vaico – Heater Hose (Part No.R3030661166VCO)

Worldpac – HEATER HOSE (Part No.R3030958158GAT)

Dorman – Molded Heater Hose: Rubber (Part No.626-709)

Gates – Premium Molded Heater Hose (Part No.18791)