2013 Chevrolet Avalanche Fuel and Emissions Systems
More 2013 Chevrolet Avalanche Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2013 Chevrolet Avalanche, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2013 Chevrolet Avalanche Fuel and Emissions Systems
GM Genuine Parts – Vapor Canister Vent Valve (Part No.23481275)
from
$79.99
GM Genuine Parts Vapor Canister Vent Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves, when opened, allow air to pass in and out of the vapor canister vent. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Controls fresh air flow to the canister
- Sends fuel vapors to the engine for re-burn
- Helps control fuel tank pressure
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – GM Original Equipment Fuel Pump Flow Control Module (Part No.E2031425029ACD)
from
$286.60
The ACDelco GM Original Equipment Fuel Pump Driver Module is a GM-recommended replacement for your vehicle’s original component. The Fuel Pump Driver Module is used on modern return-less fuel supply systems, where the fuel pump output is regulated based on engine speed and load. These modules control the voltage delivered to the vehicle’s fuel pump, regulating the fuel pump’s speed. This helps to maintain the optimum fuel pressure and fuel delivery to the engine throughout its full operating range. This original equipment module has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory fuel pump driver module
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPE1089)
from
$78.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)
from
$8.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Dorman – Body Bolt – M6-1.0 X 25mm (Part No.963-232D)
from
$4.49
These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.
Product Features:
See More
Product Features:
- Durable materials – manufactured to specific thread tolerance standards
- Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
- Multipurpose usefulness – can be used in a variety of applications, from auto to home
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
GM Genuine Parts – Fuel Feed Pipe (Part No.24100442)
from
$76.99
GM Genuine Parts Fuel Feed Lines are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are a hose that transfers fuel from one point in the fuel system to another, this line is fed by the fuel pump and delivers the fuel through a fuel filter to either a carburetor or fuel injector. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Directs fuel flow to optimize performance
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Fuel Tank Lock Ring LO1582926 (Part No.LO1582926)
from
$15.99
Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.
Product Features:
See More
Product Features:
- Engineered to meet or exceed all OEM specifications
- Precision stamped and are treated with a rust proof finish to ensure durability and strength
DENSO – First Time Fit Oxygen Sensor (Part No.C5010422568ND)
from
$61.86
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1165)
from
$8.49
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali
Product Features:
See More
Product Features:
- Lifecycle tested to meet or exceed OE specifications
- Direct OE replacement
- High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
- Global coverage for import and/or domestic applications.
Dorman – Fuel Tank Strap (Part No.E2007960001DOR)
from
$86.07
Fuel Tank Strap
GM Genuine Parts – Fuel Injection Fuel Rail Bolt (Part No.12554211)
from
$9.99
GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1011)
from
$65.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
GM Genuine Parts – Fuel Tank Lock Ring (Right) (Part No.TR26)
from
$12.99
GM Genuine Parts Fuel Tank Sender Retainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These retainers help align and secure your vehicle’s fuel tank sender. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Help align and secure fuel tank sender
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)
from
$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Vapor Canister (Part No.22963841)
from
$214.99
GM Genuine Parts Vapor Canisters are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These canisters capture and store evaporating fuel vapors from the fuel tank to be drawn into the intake manifold during engine operation. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps reduce harmful pollutants from entering the atmosphere
- Captures fuel vapors to be re-burned in the engine
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – Vapor Canister Purge Valve (Part No.214-1680)
from
$59.99
ACDelco GM Original Equipment Vapor Canister Purge Valves are GM-recommended replacements for your vehicle’s original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment vapor canister purge valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Controls vapor flow from canister to engine
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Sequential Multi-Port Fuel Injector Assembly (Part No.217-2436)
from
$76.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
- Allows for a quick throttle response
- Assists in cold engine starts
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Fuel Pressure Sensor (Part No.13500745)
from
$44.99
ACDelco GM Original Equipment Fuel Pressure Sensors monitor the fuel pressure in your vehicle’s fuel system, and are GM-recommended replacements for your vehicle’s original components. They send fuel pressure information to the powertrain control module, which uses the data to adjust fuel delivery parameters. These original equipment fuel pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Signals the PCM to monitor fuel supplied to the engine
- Designed to accurately monitor fuel tank pressure
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – GM Original Equipment Fuel Pump Tank Seal (Part No.E3004289666ACD)
from
$15.30
The ACDelco GM Original Equipment Fuel Pump Tank Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Fuel Injector Seal Kit (Part No.AS053)
from
$6.79
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.70914)
from
$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
GM Genuine Parts – Fuel Pump O-Ring (Part No.G41)
from
$12.99
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4212)
from
$69.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest – Multi Purpose Relay (Part No.83A1003)
from
$20.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
ACDelco – GM Original Equipment Vapor Canister Purge Valve Hose (Part No.B7082580765ACD)
from
$195.62
The ACDelco GM Original Equipment Vapor Canister Purge Valve Hose is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – GM Original Equipment Vapor Canister Purge Valve Hose (Part No.B7082580761ACD)
from
$337.32
The ACDelco GM Original Equipment Vapor Canister Purge Valve Hose is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61469)
from
$13.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Mahle – Throttle Body Gasket (Part No.C7001291899MAH)
from
$20.40
MAHLE Cleveite Inc. is not responsible for failures resulting from owner, operator or third party abuse or neglect including, but not limited to engine operation without adequate lubricant or coolant, over or under-fuelling, over-speeding, lack of proper maintenance to cooling, lubrication or air intake systems, improper storage, starting, warm-up, run-in or shutdown procedures or the continued operation of an engine after the first sign of a malfunction. MAHLE Cleveite Inc. is not responsible for failures resulting from improper installation or repair procedures, alteration or the misapplication of parts, or use in engines modified for competition or levels of performance beyond the engine manufacturers original specifications. Mahle/Cleveite – (The MAHLE Group) is one of the largest global automotive parts manufacturers, specializing in Engine Components, Filtration and Peripherals.
See More
Popular 2013 Chevrolet Avalanche Fuel and Emissions Systems Categories
2013 Chevrolet Avalanche Fuel and Emissions Systems
You count on your 2013 Chevrolet Avalanche to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 103 Fuel and Emissions Systems ranging in price from $1.79 to $618.37, you’re sure to find everything you need for your 2013 Chevrolet Avalanche.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 16 different brands like DENSO, Carquest Premium, and Bosch. 2013 Chevrolet Avalanche Fuel and Emissions Systems start as low as $1.79!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 4,110 extensive product reviews on 2013 Chevrolet Avalanche Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap: 10595, Screw On, Direct Fit, Provides Tight Seal, 1 Pack with 4.5 stars and Switching Oxygen Sensor: 4 Wire, 15" Long, Heated, Direct Fit with 4.8 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2013 Chevrolet Avalanche below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2013 Chevrolet Avalanche
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Chevrolet Avalanche running right for years to come. In our inventory you’ll find brands like DENSO, Carquest Premium, Bosch, and even more.
Popular Carquest Fuel and Emissions Systems
You’ll find popular Carquest brand products across Emission Controls and Fuel Tanks. All are waiting to get your 2013 Chevrolet Avalanche back on the road. Some of the top-rated Carquest products in these categories are:
Top-Rated DENSO Fuel and Emissions Systems
If DENSO are what you’re looking for, our inventory holds plenty. We stock DENSO brand Fuel and Emissions Systems for your 2013 Chevrolet Avalanche, and some of our most reviewed DENSO parts include:
FAQs for 2013 Chevrolet Avalanche Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2013 Chevrolet Avalanche?
Out of 103 Fuel and Emissions Systems for the 2013 Chevrolet Avalanche, the most popular in our inventory are:
What are the top-rated 2013 Chevrolet Avalanche Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 2013 Chevrolet Avalanche based on customer reviews/ratings are:
from
$21.99
(16)
Locking Fuel Cap: 10595, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“The product I use to keep thefts from occurring and my gas be gone”
