from

$24.29

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$43.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$11.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$14.49

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$176.81

Control Arm Strut

from

$30.31

Control Arm Mntg Bra

from

$306.25

The MTC control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$45.99

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$25.47

The Lemfoerder Trailing Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$51.99

Monroe® OESpectrum® shock absorbers and struts are available for popular for European, Asian and North American passenger cars, light trucks and SUVs featuring Tenneco’s latest global original equipment valving technologies designed with the right techno

Product Features:

All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
Rod Displaced Valving Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
Fluon Banded Piston The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
Twin Technology Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
Hardened and Chrome Plated Piston Rod Long service life.
Nitrogen Gas Charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
Unique Rod Guide and Single Lip Seal Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
Special Dust Boot/Jounce Bumper Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$276.32

SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance and quality standards. SACHS products have the best dampening characteristics with an application-tuned valve pairing longevity with superior comfort and control for vehicles in any road condition.

Product Features:

TwinTube Design

from

$61.99

The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The Gas-a-Just is available as an OE monotube replacement and as an OE twin-tube performance upgrade. The KYB Gas-a-Just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand. The Gas-a-Justs high-pressure, monotube design delivers the control spirited drivers are looking for and its ideal for European cars.

Product Features:

Adds Up To 25% More Damping Performance Over Original Equipment Shocks
Components And Valving Designed Specifically For The Bow 3 Series
Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5013

from

$106.13

Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Product Features:

Constant damping characteristics under any load
Consistent performance and handling give the vehicle a new car feel every time
Proven BILSTEIN gas pressure technology
High OEM quality standards

from

$12.26

Shock Mount

from

$109.79

Headlight Level Sensor

from

$92.66

Headlight Level Sensor

from

$20.70

The Lemfoerder shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
OE style mounts and fasteners
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$21.33

The Lemfoerder shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
OE style mounts and fasteners
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$26.49

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$24.29

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing
Designed And Built Specifically For Bows

from

$11.99

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$36.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$30.72

The KYB shock mounting kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$36.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Meets or exceeds OE requirements
Helps restore steering and handling

from

$31.49

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$1047.99

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

Direct Bolt-On Installation
100% Hand TIG Welded
Black Zinc Coating Finish

from

$357.99

aFe Control is proud to release the PFADT Series, Lowering Kit for 2005 & Up Corvette C6 & C7. This lowering kit is designed to lower your C6/C7 up to 1.25″ enhancing the sleek, body lines, and giving it a more aggressive, stylish look. Designed to work with the factory transverse leaf springs, the package includes 4 lowering bolts. These aren’t ordinary bolts, unlike the factory bolt and pad, our bolts feature a CNC, machined stainless steel stud with wrench flats, mated to a articulating foot, and a nylon foot pad. This design offers years of corrosion resistance and smooth suspension articulation, and quiet operation. Designed as a direct fit installation, no modifications is necessary. The lowering kit can be used with factory shock absorbers, or for a even better ride, try our Johnny O’Connell signature series shock upgrade.

Product Features: