2013 Audi A6 Engine Parts

Below you will find various in-demand Audi Engine Parts, components and accessories for your 2013 A6. Advance Auto Parts has popular A6 parts like Camshafts, Engine Timing Parts, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other A6 model years including 2009, 2010, 2011, 2012, 2014, 2015, 2016, 2017, 2018 and more. Select a category of 2013 Audi A6 Engine Parts below and start saving instantly.

Popular 2013 Audi A6 Engine Parts Categories

Engine Timing Belt Kit With Water Pumps

Engine Valve Lifters

Valve Cover Gaskets

Turbochargers and Parts

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Cylinder Head Bolt Sets

Crankshaft Position Sensors

Timing Covers

Harmonic Balancers

Cylinder Head Gasket Sets

Engine Mounts

Oil Pans

Cylinder Head Gaskets

Crankshaft Seals

Turbocharger Oil Lines

Timing Belts

Oil Caps

Turbocharger Wastegate Solenoids

Turbo Pressure Sensors

Timing Chain Tensioners

Intercoolers

Timing Cover Seals

Rocker Arms

Balance Shaft Chain Tensioners

Engine Oil Cooler Seals

Engine Valve Stem Seals

Engine Oil Separators

Lower Gasket Sets

Turbocharger Coolant Lines

Turbocharger Gaskets

Fuel Pump Flange Gaskets

Cylinder Head Bolt Washer Sets

Turbocharger Drain Gaskets

Engine Assembly Lube

Turbocharger Oil Supply Line Banjo Bolt

Engine Mount Solenoids

Essential Engine Parts for 2013 Audi A6s

from

$9.99

Our high-quality valve train components are built to handle the hotter temperatures and higher pressure of increasingly smaller engines. These repair solutions can meet growing demands on the combustion process and help increase engine service life.

from

$11.99

Rein Automotive OE quality banjo bolts are made with premium materials and designed and manufactured to be direct-fit replacements.

Product Features:

Designed to tight tolerances to ensure proper sealing
Made using high quality materials
Designed and constructed to strict engineering quality standards
Restores the vehicle to safe and optimal performance levels.

from

$23.99

Rein Automotive OE quality oil caps fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for the OE cap. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life.

Product Features:

Prevents moisture and debris from entering and contaminating the system
Direct fit
Manufactured to strict engineering standards/specifications in materials and tolerances
Produced by an original equipment supplier

from

$16.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$127.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 05-07;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2005-2007
Weight approx: 3 Lbs
HYDRAULIC

from

$12.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$62.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products. URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

from

$44.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$192.99

ENG TIMNG CHAINTNSNR

from

$4.79

INA Timing Chain Guides are designed to meet or exceed OE quality and performance. Our PLASTIC meets the OEM PA66 and PA46 grade for material and hardness.

from

$4.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$81.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$116.99

The turbocharger is an exhaust driven engine modifier that is designed to force more air or oxygen into the combustion chamber than a normally aspirated engine could on its own. The Turbocharger Boost Sensor reports the boost pressure in the system when the wastegate opens allowing boosted air into the engine.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$18.29

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round, reinforced tooth w/ grooved tip profile; designed to fit the timing sprockets precisely

from

$86.99

Carquest Premium crankshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$57.99

from

$145.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$381.99

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 3.0 Liter V6 Turbo Diesel

Product Features:

3.0 Liter V6 Turbo Diesel, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$334.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$103.99

Rein Automotive OE quality timing covers are fabricated from premium metal and/or plastic materials and manufactured to be direct-fit replacements. Rein timing covers are designed and manufactured to tight tolerances to ensure proper sealing against engine surfaces.

Product Features:

Manufactured to strict engineering standards and specifications in materials and tolerances.
Made with premium materials that is resistant to corrosion to ensure a long service life.
Includes premium gasket and/or silicone sealant.

from

$40.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$107.99

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$83.99

This turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles
Ideal solution – this coolant line is a reliable replacement for a leaking or failed original line
Durable construction – made from quality components to ensure reliable performance and long service life
Quality assured – backed by a team of product engineers based in the United States

from

$197.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$46.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$68.99

Solenoid Valve

from

$6.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$103.99

Carquest Premium crankshaft and camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Upgrade your 2013 Audi A6 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2013 Audi A6, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Engine Parts are key to keeping your A6 functioning at its best. At Advance Auto Parts, we offer a wide selection of 65 Engine Parts for the 2013 Audi A6, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Timing Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2013 Audi A6 at great prices. Our Engine Parts inventory for this model ranges from just $4.79 to $1,294.00, with an average price of $110.48. Our 65 Engine Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 2013 Audi A6 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Audi A6, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO National, and more. FELPRO Engine Parts start at just $8.99 and boast an impressive 4.6 stars average rating from customers. With 14 customer reviews and counting, our 2013 Audi A6 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2013 Audi A6 is always ready to roll. We’re committed to providing you with everything you need to keep your A6 in top shape, all in one place. Start shopping confidently below for your 2013 Audi A6!

Best-Selling Camshafts for 2013 Audi A6s

Enhance the driving experience in your Audi with 3 quality Camshaft components, starting at $24.99.

show more show less

from

$31.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$51.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$24.99

Most Popular 2013 Audi A6 Engine Timing Parts

Customize your Audi with 13 Engine Timing Parts products like Engine Timing Belt Kit With Water Pumps, Timing Belts, and Timing Covers, all priced under $334.99.

show more show less

from

$39.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$18.29

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round, reinforced tooth w/ grooved tip profile; designed to fit the timing sprockets precisely

from

$80.99

Manufactured to strict engineering standards and specifications in materials and tolerances.
Made with premium materials that is resistant to corrosion to ensure a long service life.
Includes premium gasket and/or silicone sealant.

from

$334.99

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$324.99

On certain Audi and Volkswagen vehicles equipped 2.0 liter engines, the mesh screen oil filter in the original equipment camshaft bridge cover tends to fail from the pressure of pulsations generated by the oil circuit. The pulsations can clog the filter with debris or cause the junction between the mesh screen and its plastic housing to fail and push the separated filter components into the engine lubrication system. Either condition starves the engine for oil, reduces engine power and can cause stalling, irregular idle, and a check engine light. The dealer only offers a replacement cover with the same failure-prone integrated oil filter or recommends removing the screen in the failed cover entirely. This Dorman OE FIX camshaft bridge cover features an upgraded one-piece stainless steel housing with a mesh screen laser-welded into place instead of the factory design’s plastic housing that holds the screen in place with a brass ring that can loosen and fall off. The screen mesh in our filter also has 3X the tensile strength and larger openings than the original equipment filter – small enough to capture damaging debris, while mitigating the harmful effects of oil pressure pulsations. This improved cover design is engineered to provide the protection specified Audi and Volkswagen engines need for peak performance and eliminate worries about costly damage from unfiltered contaminants and a factory-designed filter prone to breakage during normal engine operations.

Product Features:

Better fix – this engine timing cover features a redesigned oil filter that resists clogging and breakage to better protect the engine from harmful oil pulsations and oil contaminants
Upgraded materials – the integrated filter is a one-piece stainless steel housing with the mesh screen laser-welded into place, rather than the factory’s multi-piece plastic design
Fully tested – in hot oil immersion tests simulating extreme engine temperatures, the mesh screen in the upgraded filter tested to 3X the tensile strength of the original screen
Ensures performance – engineered to help ensure optimal engine performance and component protection while reducing the potential for future failures

from

$298.99

Manufactured to strict engineering standards and specifications in materials and tolerances.
Made with premium materials that is resistant to corrosion to ensure a long service life.
Includes premium gasket and/or silicone sealant.

from

$249.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$201.99

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$26.99

ENG BAL SHFT CHN TNS

from

$23.99

For optimal power transmission in the timing drive, we offer you repair solutions. Our components ensure the correct gear ratios and deliver high reliability paired with low maintenance costs.

from

$11.49

INA Timing Chain Guides are designed to meet or exceed OE quality and performance. Our PLASTIC meets the OEM PA66 and PA46 grade for material and hardness.

from

$4.99

ENG BAL SHFT CHN TNS

from

$4.79

INA Timing Chain Guides are designed to meet or exceed OE quality and performance. Our PLASTIC meets the OEM PA66 and PA46 grade for material and hardness.

Top Picks for 2013 Audi A6 Valve Cover and Cylinder Heads

Upgrade Audi A6s with top-quality Valve Cover and Cylinder Heads parts, including 10 OEM and aftermarket selections for your 2013 model.

show more show less

from

$42.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$132.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$43.99

Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$66.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$226.99

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$40.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$26.49

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Direct OEM replacement fastener
Thread coatings where applicable
Dana engineering-approved for fit, form and function

from

$10.99

from

$9.99

from

$7.99

In-Demand Engine Mounts for 2013 Audi A6s

Select from 3 premium Engine Mounts parts for your 2013 Audi A6, with prices ranging from $68.99 to $184.99.

show more show less

from

$184.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 12-18;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2012-2018
Weight approx: 4 Lbs
HYDRAULIC
WITH WIRE / SENSOR

from

$87.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 12-18;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2012-2018
Weight approx: 3 Lbs
HYDRAULIC
WITHOUT WIRE / SENSOR

from

$68.99

Solenoid Valve

Most Sold 2013 Audi A6 Engine Gaskets and Seals

Explore our best-selling Audi parts for the 2013 A6 among 10 OEM and aftermarket options starting from $4.99.

show more show less

from

$19.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$22.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$32.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$6.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$4.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$6.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$108.99

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$35.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Fiber construction
Compliant to a wide range of surface conditions
Dana engineering-approved for fit, form and function

from

$28.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds original equipment specifications.
Zero engine leakage for late model vehicles.

from

$6.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Top-Rated Engine Parts Brands For Your 2013 Audi A6

Shop for the best-rated brands offering Engine Parts and other products for your 2013 Audi A6s. Below you’ll find some of our best rated Engine Parts from FELPRO and National, and more. Engine Parts from these brands that fit a 2013 A6 start at just $8.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2013 Audi A6 Engine Parts

When it comes to maintaining or upgrading your 2013 Audi A6, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2013 Audi A6. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.99, with an average price of just $23.99. Plus, with over 4 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $19.99

(1)

Engine Oil Pan Gasket Set, 20 Bolt Hole, One Piece Gasket

“Gasket fit perfectly with no leaks. Using this type of gasket prevents gasket maker from contaminating the oil.”

from $8.99

(2)

Turbocharger Drain Gasket

“Works great. 2011 audi a5 2.0t”

from $42.99

(1)

Engine Cylinder Head Bolt Set

“It’s made in Italy same as original bolts, so I’m assuming quality is as original.”

Popular National 2013 Audi A6 Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 2013 Audi A6 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2013 A6, Advance Auto Parts carries a full inventory of 1 National Engine Parts. Plus you will be keeping your Audi in peak condition while saving money because prices on these National Engine Parts range up to $39.99, plus, with more than 1 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $39.99

(1)

Shaft Repair Sleeve

“Easy to use, too early to tell how long it will last. It did stop the oil leak with a new oil seal on the front crankshaft pulley. 87 mercedes 300td.”

FAQs for 2013 Audi A6 Engine Parts

Which Engine Parts are best-sellers for 2013 Audi A6s?

Out of 65 Engine Parts that fit 2013 Audi A6s, the following parts are the top sellers:

Camshaft Sensor (12351332) – $31.99
VALVE COVER GASKET SET (10587065) – $22.99
Engine Crankshaft Seal Kit (10700391) – $42.99

What’s the price range for 2013 Audi A6 Engine Parts?

Engine Part prices for the 2013 Audi A6 start at $4.79 and go up to $1,294.00 for the most premium parts.

What’s the average price of a Engine Part for a 2013 Audi A6?

The average price for Engine Parts for the 2013 Audi A6 is $110.48. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Audi A6 model years?

Yes, we currently carry Engine Parts for 21 model years of Audi A6s between 1995 and 2018. Engine Parts are bought most frequently for the following model years: 2018, 2017, 2016, 2015, 2014, 2012, 2011, 2010, and 2009.

What are the cheapest Engine Parts for my 2013 Audi A6?

The cheapest 2013 Audi A6 Engine Parts we carry in stock are:

Engine Timing Chain Guide (50262580) – $4.79
Multi-Purpose O-Ring (12005668) – $4.99
ENG BAL SHFT CHN TNS (50302313) – $4.99
Fuel Pump Gasket (10599062) – $6.99
Engine Oil Cooler Seal (12083854) – $6.99

What are the top-rated Engine Parts that fit the 2013 Audi A6?

Out of 14 reviews by customers, our 2013 Audi A6 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2013 Audi A6 and their top-rated products:

Valve Cover and Cylinder Heads
- Engine Cylinder Head Bolt Set (10717001) – $42.99
Engine Gaskets and Seals
- Engine Cylinder Head Bolt Set (10717001) – $42.99

What types of Engine Parts do you sell for my 2013 Audi A6?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 2013 Audi A6:

Can I get help with 2013 Audi A6 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Engine Parts and more.

What is your return policy for Audi A6 Engine Parts?

Advance Auto Parts keeps returns simple. For new Audi A6 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2013 Audi A6 Engine Parts

INA US – Engine Camshaft Follower (Part No.VR0058)

Rein – Turbocharger Oil Feed Line Banjo Bolt (Part No.HWB0090)

Rein – Cap-Oil (Part No.CPL0046)

Felpro – Engine Crankshaft Seal Kit (Part No.TCS 46138)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.9407)

FAG US – General Seal (Part No.SS2412)

URO Parts – Engine Oil Cooler (Part No.06J117021J)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71074-3)

INA US – ENG TIMNG CHAINTNSNR (Part No.ZT-9-5155)

INA US – Engine Timing Chain Guide (Part No.ZG0180)

Felpro – Multi-Purpose O-Ring (Part No.71857)

Dorman – Engine Oil Pan: Direct Fit, Steel, Sump, 3 Quart (Part No.264-581)

Carquest Premium – Turbocharger Boost Sensor (Part No.ECC2406)

Dayco – Premium Timing Belt, 10.63 Inch With 54 Round Tooth, With Grooved Tip (Part No.95348)

Carquest Premium – Engine Crankshaft Position Sensor (Part No.CSA1343)

URO Parts – Oil Separator (Part No.06H103495AK)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72834)

KAI – Turbo Intercooler (Part No.CAC010030)

Dayco – Timing Water Pump Kit; With Belt And Pump, 2 Piece Set (Part No.WP348K1A)

Rein – Timing Cover (Part No.TCV0137)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-37475-00)

Dorman – Turbocharger Oil Return Line (Part No.667-581)

Dorman – Turbocharger Coolant Feed Line (Part No.667-587)

PowerBond – Premium OEM Replacement Harmonic Balancer; 142.78mm Diameter (Part No.PB1721N)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50865 R)

Rein – Solenoid Valve (Part No.EPV0237)

MAHLE Original – Fuel Pump Gasket (Part No.D32551)

Carquest Premium – Crankshaft or Camshaft Position Sensor (Part No.CSA3547)

Carquest Premium – Camshaft Sensor (Part No.CSC1138)

NTK – Engine Camshaft Position Sensor (Part No.EC0021)

INA US – ENGINE VALVE LIFTER (Part No.VT0244)

National – Shaft Repair Sleeve (Part No.99177)

Dayco – Premium Timing Belt, 10.63 Inch With 54 Round Tooth, With Grooved Tip (Part No.95348)

Rein – Timing Cover (Part No.TCV0160)

Dayco – Timing Water Pump Kit; With Belt And Pump, 2 Piece Set (Part No.WP348K1A)

Dorman – Camshaft Bridge Cover (OE Fix) (Part No.635-050)

Rein – Timing Cover (Part No.TCV0158)

Dorman – Timing Cover Kit (Part No.635-698)

Dorman – Timing Cover Kit (Part No.635-699)

INA US – ENG BAL SHFT CHN TNS (Part No.ZT0251)

INA US – Engine Timing Chain Guide (Part No.ZG0568)

INA US – Engine Timing Chain Guide (Part No.ZG0251)

INA US – ENG BAL SHFT CHN TNS (Part No.ZG0183)

INA US – Engine Timing Chain Guide (Part No.ZG0180)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72310)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26455 PT)

Felpro – Engine Cylinder Head Bolt Washer Set (Part No.ES 71336)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26455 PT)

Victor Reinz – Engine Cylinder Head Gasket Set (Part No.02-37475-01)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-37475-00)

Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-32276-01)

INA US – Engine Camshaft Follower (Part No.VF0076)

INA US – Engine Camshaft Follower (Part No.VR0058)

INA US – Engine Valve Lifter (Part No.VT0224)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.9988)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.10046)

Rein – Solenoid Valve (Part No.EPV0237)

Felpro – Engine Oil Pan Gasket Set, 20 Bolt Hole, One Piece Gasket (Part No.OS 30821)

Felpro – VALVE COVER GASKET SET (Part No.VS 50762 R)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71074-1)

MAHLE Original – Fuel Pump Gasket (Part No.D32551)

Felpro – Multi-Purpose O-Ring (Part No.71857)

Felpro – Engine Oil Cooler Seal (Part No.72397)

Felpro – Engine Conversion Gasket Set (Part No.CS 26455)

Victor Reinz – Engine Oil Pan Gasket Set (Part No.71-15348-00)

Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, 2 Pieces (Part No.15-10112-01)

Victor Reinz – Fuel Pump Gasket (Part No.41-77593-00)