2012 Volkswagen Passat Steering and Chassis Parts

Name: Camber Adjustable Roll Center Correcting Performance Ball Joint Kit
Brand: Whiteline
SKU: KCA472
Price: 185.99 USD

Below you will find various in-demand Volkswagen Steering and Chassis Parts, components and accessories for your 2012 Passat. Advance Auto Parts has popular Passat parts like Tie Rods, Sway Bars, Power Steering Parts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Passat model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2012 Volkswagen Passat Steering and Chassis Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2012 Volkswagen Passat Steering and Chassis Parts Categories

Power Steering Coolers

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Power Steering Pressure Hoses

Steering Knuckles

Pinion Bearings

Alignment Camber and Toe Kits

Toe Links

Alignment Toe Arms

Alignment Camber Ball Joints

Essential Steering and Chassis Parts for 2012 Volkswagen Passats

from

$185.99

A must for lowered vehicles, Whiteline roll centre, bump steer and camber correction kits are designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.

Product Features:

Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Install guide included providing detailed instructions on how to install your new purchase .
Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.

from

$139.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$51.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$43.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$50.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$171.99

This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$401.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$435.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$459.99

Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE

from

$464.99

NEW RACK & PINION

from

$35.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Provides adjustment for camber and caster changes
Greaseable design
Easy to install
Construction and design validated by MOOG engineers
Provides improved steering and handling feel
Long-lasting performance

from

$96.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$7.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Quik-Connect Coupler – Fits most 5/16″ trans-lines with 1/2″-20 thread
Compatible with OEM cooler systems
Made of brass
Quality construction

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$94.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$123.99

Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$49.49

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$16.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$12.79

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$270.99

Product Features:

All critical components are built to strict manufacturing specifications, which eliminates critical component failure that causes noise and leaks
Exterior surfaces are finished with corrosion and rust resistant coatings to ensure an extended service life
All components are 100% new and functionally tested to meet or exceed OE specifications for extended reliability
Power steering pulley and reservoir included (when applicable) which eases installation and eliminates contamination in the system

from

$166.99

Premium-quality remanufactured power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Every Unit is fully disassembled, cleaned, and inspected which ensures that defects are identified and corrected to allow for an extended service life
All shafts and internal surfaces are examined, reconditioned, and polished which prevents premature failure of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life of the power steering pump
All assembled units are 100% end-of-line tested for leaks, noise, and performance to ensure that the product has the same functionality as intended by the OE

from

$222.99

NEW P/S PUMP

from

$278.99

Premium-quality new power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

All critical components are built to strict manufacturing specifications, which eliminates critical component failure that causes noise and leaks
Exterior surfaces are finished with corrosion and rust resistant coatings to ensure an extended service life
All components are 100% new and functionally tested to meet or exceed OE specifications for extended reliability
Power steering pulley and reservoir included (when applicable) which eases installation and eliminates contamination in the system

from

$44.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$66.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Easy to install.
Construction and design validated by MOOG engineers
Restores like-new steering and handling
Designed to meet or exceed original equipment performance
Broad coverage for foreign and domestic applications
Engineered to provide long life and dependability

from

$46.99

Carquest Premium ball joints are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium ball joints utilize the same ball joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all ball joints to reduce rust. Each part number in the Carquest Premium ball joint line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included for easier installation (where applicable)

from

$68.99

Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

Upgrade your 2012 Volkswagen Passat with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2012 Volkswagen Passat, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Passat functioning at its best. At Advance Auto Parts, we offer a wide selection of 50 Steering and Chassis Parts for the 2012 Volkswagen Passat, designed to meet your needs without breaking the bank. From Tie Rod replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2012 Volkswagen Passat at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $12.79 to $891.99, with an average price of $113.93. Our 50 Steering and Chassis Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 2012 Volkswagen Passat without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Volkswagen Passat, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog Driveworks, and more. Moog Steering and Chassis Parts start at just $52.99 and boast an impressive 4.5 stars average rating from customers. With 1,248 customer reviews and counting, our 2012 Volkswagen Passat Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Volkswagen Passat is always ready to roll. We’re committed to providing you with everything you need to keep your Passat in top shape, all in one place. Start shopping confidently below for your 2012 Volkswagen Passat!

Best-Selling Tie Rods for 2012 Volkswagen Passats

Enhance the driving experience in your Volkswagen with 9 quality Tie Rod components, starting at $43.99.

show more show less

from

$57.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$57.99

RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$43.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$43.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$69.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$103.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL – Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
Assembled in the USA
TIME SAVINGS – Pre-applied thread locking compound makes installation easier and prevents self-loosening

from

$99.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$94.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$74.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

Most Popular 2012 Volkswagen Passat Sway Bars

Customize your Volkswagen with 9 Sway Bars products like Sway Bar Link Kits, all priced under $123.99.

show more show less

from

$19.99

SWAY BAR LINK KIT 1 EA DRIVE

from

$52.99

Product Features:

EASY TO INSTALL – Wrench flats ensure easy installation and removal
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$25.99

Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating on steel links to reduce rust and extend service life
Hex formed studs for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Hardware included for easier installation (where applicable)

from

$46.49

Engineered for OE fit, form and function
Corrosion-resistant coating on steel links to reduce rust and extend service life
Hex formed studs for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Hardware included for easier installation (where applicable)

from

$49.49

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$28.99

from

$123.99

Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$94.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$90.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

Top Picks for 2012 Volkswagen Passat Power Steering Parts

Upgrade Volkswagen Passats with top-quality Power Steering Parts parts, including 15 OEM and aftermarket selections for your 2012 model.

show more show less

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$16.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$242.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$116.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$155.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$891.99

Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE

from

$451.99

Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE

from

$222.99

NEW P/S PUMP

from

$113.99

PS-PMP

from

$91.99

Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures

from

$53.99

Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$40.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$13.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$12.79

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

In-Demand Alignment Hardware for 2012 Volkswagen Passats

Select from 1 premium Alignment Hardware parts for your 2012 Volkswagen Passat.

show more show less

from

$185.99

Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Install guide included providing detailed instructions on how to install your new purchase .
Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.

Most Sold 2012 Volkswagen Passat Ball Joints

Explore our best-selling Volkswagen parts for the 2012 Passat among 11 OEM and aftermarket options starting from $46.99.

show more show less

from

$68.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$46.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included for easier installation (where applicable)

from

$46.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included for easier installation (where applicable)

from

$252.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$66.99

Easy to install.
Construction and design validated by MOOG engineers
Restores like-new steering and handling
Designed to meet or exceed original equipment performance
Broad coverage for foreign and domestic applications
Engineered to provide long life and dependability

from

$66.99

Easy to install.
Construction and design validated by MOOG engineers
Restores like-new steering and handling
Designed to meet or exceed original equipment performance
Broad coverage for foreign and domestic applications
Engineered to provide long life and dependability

from

$252.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$68.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$87.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$78.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

HARDENDED TO MAXIMIZE STRENGTHá-áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
KEEPS DIRT AND WATER OUT – Pre-installed dust bootáseal provides an effective barrier againstáwater-causing contaminants
ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$78.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

HARDENDED TO MAXIMIZE STRENGTHá-áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
KEEPS DIRT AND WATER OUT – Pre-installed dust bootáseal provides an effective barrier againstáwater-causing contaminants
ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

Top-Rated Steering and Chassis Parts Brands For Your 2012 Volkswagen Passat

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2012 Volkswagen Passats. Below you’ll find some of our best rated Steering and Chassis Parts from Moog and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 2012 Passat start at just $19.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2012 Volkswagen Passat Steering and Chassis Parts

When it comes to maintaining or upgrading your 2012 Volkswagen Passat, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2012 Volkswagen Passat. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $52.99, with an average price of just $56.32. Plus, with over 12 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $52.99

(8)

Suspension Stabilizer Bar Link

“Good strong piece, way better than stock.”

from $57.99

(2)

Steering Tie Rod End

“Perfect fit. Easy 30 minute install start to finish.”

from $57.99

(2)

Steering Tie Rod End

“Good fit, easy swap.”

Popular Driveworks 2012 Volkswagen Passat Steering and Chassis Parts

Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2012 Volkswagen Passat owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2012 Passat, Advance Auto Parts carries a full inventory of 1 Driveworks Steering and Chassis Parts. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range up to $19.99, plus, with more than 8 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $19.99

(8)

SWAY BAR LINK KIT 1 EA DRIVE

“Fast service, items fit as advertised.”

FAQs for 2012 Volkswagen Passat Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2012 Volkswagen Passats?

Out of 50 Steering and Chassis Parts that fit 2012 Volkswagen Passats, the following parts are the top sellers:

Suspension Stabilizer Bar Link (20519802) – $52.99
Stabilizer Bar Link (12097199) – $25.99
Steering Tie Rod End (11919672) – $43.99

What’s the price range for 2012 Volkswagen Passat Steering and Chassis Parts?

Steering and Chassis Part prices for the 2012 Volkswagen Passat start at $12.79 and go up to $891.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2012 Volkswagen Passat?

The average price for Steering and Chassis Parts for the 2012 Volkswagen Passat is $113.93. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Volkswagen Passat model years?

Yes, we currently carry Steering and Chassis Parts for 30 model years of Volkswagen Passats between 1990 and 2022. Steering and Chassis Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Steering and Chassis Parts for my 2012 Volkswagen Passat?

The cheapest 2012 Volkswagen Passat Steering and Chassis Parts we carry in stock are:

Bearing Race (18441695) – $12.79
Power Steering Filter (50308546) – $13.99
Bearing Race (15050148) – $16.49
SWAY BAR LINK KIT 1 EA DRIVE (10463023) – $19.99
Stabilizer Bar Link (12097199) – $25.99

What are the top-rated Steering and Chassis Parts that fit the 2012 Volkswagen Passat?

Out of 1,248 reviews by customers, our 2012 Volkswagen Passat Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2012 Volkswagen Passat and their top-rated products:

Tie Rods
- Steering Tie Rod End (21880021) – $57.99
- Steering Tie Rod End (21880113) – $57.99
Sway Bars
- Steering Tie Rod End (21880021) – $57.99
- Steering Tie Rod End (21880113) – $57.99

What types of Steering and Chassis Parts do you sell for my 2012 Volkswagen Passat?

As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 2012 Volkswagen Passat:

Can I get help with 2012 Volkswagen Passat Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Steering and Chassis Parts and more.

What is your return policy for Volkswagen Passat Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Volkswagen Passat Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Volkswagen Passat Steering and Chassis Parts

Whiteline – Camber Adjustable Roll Center Correcting Performance Ball Joint Kit (Part No.KCA472)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11232)

Rein – Tie Rod End (Part No.SCE0154P)

Carquest Premium – Steering Tie Rod End (Part No.310-234678)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-P038F)

Dorman – Alignment Camber / Toe Lateral Link (Part No.528-316)

Dorman – Steering Knuckle (Part No.698-311)

Dorman – Steering Knuckle (Part No.698-310)

Carquest Premium – Remanufactured Power Steering Rack & Pinion – Hydraulic (Part No.312-0109CQ)

Atlantic Automotive Eng – NEW RACK & PINION (Part No.3985N)

MOOG – Alignment Camber / Toe Kit (Part No.K100407)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Banjo x 16mm Banjo (Part No.40050)

Imperial – Quick Connect Coupler (Part No.240250)

Imperial – Power Steering Oil Cooler (Part No.241009)

Rare Parts – Sway Bar Link (Part No.RP19557)

Whiteline – Front Adjustable Sway Bar Link (Part No.KLC167A)

MOOG – Suspension Stabilizer Bar Link (Part No.K80482)

National – Bearing Race (Part No.LM29710)

National – Bearing Race (Part No.LM29711)

Carquest Premium – New Power Steering Pump – Hydraulic (Part No.990-0301CQN)

Carquest Premium – Remanufactured Power Steering Pump – Hydraulic (Part No.990-0301CQ)

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5764N)

Carquest Premium – New Power Steering Pump – Hydraulic (Part No.990-1013CQN)

Rare Parts – Ball Joint (Part No.RP11066)

MOOG – Ball Joint (Part No.K500390)

Carquest Premium – Lower Ball Joint: Front Left (Part No.410-234680)

MOOG – Suspension Ball Joint (Part No.K80663)

MOOG – Steering Tie Rod End (Part No.ES80666)

MOOG – Steering Tie Rod End (Part No.ES80667)

Carquest Premium – Steering Tie Rod End (Part No.310-234678)

Carquest Premium – Steering Tie Rod End (Part No.310-234679)

Carquest Premium – Tie Rod End (Part No.700-514147)

MOOG – Steering Tie Rod End (Part No.EV800899)

Rare Parts – Tie Rod End (Part No.RP28582)

Rare Parts – Tie Rod End (Part No.RP28581)

Rare Parts – Tie Rod End (Part No.RP29308)

Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K80478)

MOOG – Suspension Stabilizer Bar Link (Part No.K80478)

Carquest Premium – Stabilizer Bar Link (Part No.644-01562)

Carquest Premium – Stabilizer Bar Link (Part No.512-001563)

MOOG – Suspension Stabilizer Bar Link (Part No.K80482)

Rein – Sway Bar Link (Part No.SCL0124R)

Whiteline – Front Adjustable Sway Bar Link (Part No.KLC167A)

Rare Parts – Sway Bar Link (Part No.RP19557)

Rare Parts – Sway Bar Link (Part No.RP19560)

Imperial – Power Steering Oil Cooler (Part No.241009)

National – Bearing Race (Part No.LM29710)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Cardone – Remanufactured Power Steering Pump (Part No.21-659)

Carquest Premium – Power Steering Pressure Hose, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.37938)

Carquest Premium – Power Steering Pressure Hose, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.37939)

Carquest Premium – Remanufactured Power Steering Rack & Pinion – Electric (Part No.212-0114ECQ)

Carquest Premium – Remanufactured Power Steering Rack & Pinion – Hydraulic (Part No.312-0205CQ)

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5764N)

Lares – PS-PMP (Part No.14357)

Carquest Premium – Power Steering Filter (Part No.20-0038FCQN)

Carquest Premium – Power Steering Filter (Part No.20-0012FCQN)

Carquest Premium – Power Steering Filter (Part No.991-FLT2CQN)

Carquest Premium – Power Steering Filter (Part No.991-FLT1CQN)

National – Bearing Race (Part No.LM29711)

Whiteline – Camber Adjustable Roll Center Correcting Performance Ball Joint Kit (Part No.KCA472)

MOOG – Suspension Ball Joint (Part No.K80662)

Carquest Premium – Lower Ball Joint: Front Left (Part No.410-234680)

Carquest Premium – Lower Ball Joint: Front Right (Part No.410-234681)

Dorman – Suspension Control Arm (Part No.522-838)

MOOG – Ball Joint (Part No.K500390)

MOOG – Ball Joint (Part No.K500391)

Dorman – Suspension Control Arm (Part No.522-837)

MOOG – Suspension Ball Joint (Part No.K80663)

Rare Parts – Ball Joint (Part No.RP10883)

MOOG – Suspension Control Arm And Ball Joint Assembly (Part No.RK643211)

MOOG – Suspension Control Arm And Ball Joint Assembly (Part No.RK643212)