2012 Subaru Forester Wheels and Tires
More 2012 Subaru Forester Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2012 Subaru Forester, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2012 Subaru Forester Wheels and Tires
McGard – Chrome Cone Seat Wheel Installation Kit for 5 Lug Vehicles (M12 x 1.25 Thread Size) (Part No.84554)
from
$94.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
McGard – Chrome SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.25 Thread Size) (Part No.65554)
from
$144.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
REDI-Sensor – VDO Metal Clamp-in Stem REDI-Sensor (Part No.SE10003A)
from
$56.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.
Product Features:
See More
Product Features:
- Installs right out of the box
- No sensor programing required
- Works with all major TPMS scan tools
- No training required – designed to follow existing OE vehicle relearn procedures
- Faster TPMS scan tool hunt mode
- Reduces SKUs
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.29184)
from
$41.99
Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: 1 for 1 replacement sensor
- QUICK AND EASY: TPMS sensors are ready out of the box
- VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
- SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
- RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – Wheel Lug Nut: M12-1.25 Thread, Flanged, Mag, 1.68" Length, Chrome (Sold by each) (Part No.611-107)
from
$2.29
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
McGard – Black SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.25 Thread Size) (Part No.65554BK)
from
$239.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
Schrader – TPMS Sensor Service Kit (Part No.20008)
from
$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
REDI-Sensor – TPMS Service Kit (Part No.SE54191)
from
$8.49
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovatio
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Electroless nickel-plated valve cores
- Advanced anodization of valve stems and hex nuts
- Includes torque specifications and installation instructions
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – M12-1.25 Serrated Wheel Stud – 14.43mm Knurl, 41.5mm Length (Part No.610-401)
from
$3.49
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Serrated Wheel Stud (Part No.O8060321967DOR)
from
$6.69
When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Corrosion resistant
- Double-ended studs as well as serrated bolts, and wheel bolts available
- Over-length and under-length studs available for convenience and ease of installation
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.513303)
from
$213.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Carquest Premium – Wheel Bearing and Hub Assembly (Part No.91-248723)
from
$171.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
McGard – Chrome Tuner Style Cone Seat Wheel Lock Set (M12 x 1.25 Thread Size) – Set of 4 Locks and 1 Key (Part No.25254)
from
$56.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- For use on “Tuner” wheels or wheels with very small lug nut holes.
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
McGard – Chrome Cone Seat Wheel Lock Set (M12 x 1.25 Thread Size) – Set of 4 Locks and 1 Key (Part No.24154)
from
$39.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
Dorman – Wheel Nut Chrome Short Shank Mag M12-1.25, Hex 13/16 Inch Length 1.452 Inch (Quantity 4) (Part No.711-407)
from
$12.09
Our Wheel Nuts are designed and constructed to strict engineering quality standards. All of our Wheel Nuts are manufactured with high corrosion resistance to combat rust in any environment.
Product Features:
See More
Product Features:
- Wheel nut covers also available
- Easy to install
- Available in different quantities and packaging options
- Chrome wheel nut & lock kits available (where applicable)
Dorman – Wheel Nut Black Chrome Acorn 2-Pc Black M12-1.25 (Part No.711-411)
from
$12.79
Our Wheel Lug Nuts are designed and constructed to strict engineering quality standards. All of or Wheel Lug Nuts are manufactured with high corrosion resistance to combat rust in any environment.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Available in different quantities and packaging options
- Constructed of durable carbon steel
- This part is quality tested to meet product standards
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Chrome Plated Valve Stem, 20 Piece (Part No.VS-925-C)
from
$8.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- Chrome clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453″ rim hole compatibility
- 200 PSI maximum cold inflation pressure
REDI-Sensor – TPMS Service Kit, REDI-Sensor and OE Style (Part No.SE54190)
from
$4.49
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Electroless nickel-plated valve cores
- Advanced anodization of valve stems and hex nuts
- Includes torque specifications and installation instructions
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Carquest Premium – Hub Assembly with Wheel Bearing 91-583315 (Part No.91-583315)
from
$147.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
FAG US – HUB ASSEMBLY (Part No.102593)
from
$169.99
HUB ASSEMBLY
Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)
from
$41.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Maximum Signal Strength, Battery Reliability.
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Meets SAE Standards J1205 and J1206
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)
from
$11.49
Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.
Product Features:
See More
Product Features:
- Four Metal Valve Stems
- Press-in interchangeable metal valve stem
- Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
- Press release valve design allows easy installation without a tool for sensor head fitting
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)
from
$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.
Product Features:
See More
Product Features:
- MX-Sensor Components
- 4 Metal Valves
- 4 Rubber Valves
- Rubber Gasket (2×10 pcs)
- Screw Nut (2×10 pcs)
- Washer (2×10 pcs)
- Metal Valve Cap (2X10 pcs)
- Rubber Valve Cap (2X10 pcs)
- Valve Core (2X10 pcs)
Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)
from
$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
- DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Popular 2012 Subaru Forester Wheels and Tires Categories
2012 Subaru Forester Wheels and Tires
You count on your 2012 Subaru Forester to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 82 Wheels and Tires ranging in price from $2.99 to $7,321.99, you’re sure to find everything you need for your 2012 Subaru Forester.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 13 different brands like Dorman, Autel, and Schrader. 2012 Subaru Forester Wheels and Tires start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 1,420 extensive product reviews on 2012 Subaru Forester Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Hub and Bearing Assembly with 4.4 stars and Wheel Lug Nut Lock Set: M12-1.25 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key with 3.1 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2012 Subaru Forester below to get started!
Top-Rated Wheels and Tires Brands For Your 2012 Subaru Forester
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2012 Subaru Forester running right for years to come. In our inventory you’ll find brands like Dorman, Autel, Schrader, and even more.
Popular Driveworks Wheels and Tires
You’ll find popular Driveworks brand products across Wheel Bearings. All are waiting to get your 2012 Subaru Forester back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Schrader Wheels and Tires
If Schrader are what you’re looking for, our inventory holds plenty. We stock Schrader brand Wheels and Tires for your 2012 Subaru Forester, and some of our most reviewed Schrader parts include:
from
$41.99
(69)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Tire Pressure Sensors
FAQs for 2012 Subaru Forester Wheels and Tires
What are the most purchased Wheels and Tires for the 2012 Subaru Forester?
Out of 82 Wheels and Tires for the 2012 Subaru Forester, the most popular in our inventory are:
from
$3.79
This product is not rated
Wheel Nut M12-1.25 Acorn – 19mm Hex, 24mm Length
Wheel Lug Nuts
from
$3.79
This product is not rated
Wheel Stud: Serrated, M12-1.25 Thread Size, Right Hand Thread (Sold by each)
Wheel Studs
What are the top-rated 2012 Subaru Forester Wheels and Tires?
Top-rated Wheels and Tires for your 2012 Subaru Forester based on customer reviews/ratings are:
from
$186.99
(9)
Hub and Bearing Assembly
“Had a whining noise from the LR axle bearing. I usually use OEM parts, but after seeing the quality of the MOOG bearing for my son’s Toyota Tacoma I o”
from
$39.49
(7)
Wheel Lug Nut Lock Set: M12-1.25 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key
“Great product”
from
$4.49
(6)
Snap-In TPMS Service Kit: Rubber, 0.453 Inch Stem
“Decent price, good quality, no problems”
