2012 Porsche 911 Fluids and Chemicals
More 2012 Porsche 911 Fluids and Chemicals Categories
If you’re looking for an original Fluids and Chemicals replacement for a 2012 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Fluids and Chemicals to meet your needs.
Essential 2012 Porsche 911 Fluids and Chemicals
Prestone – DOT 4 Brake Fluid: Synthetic, High Grade, 50,000 Mile, 12 fl. oz. (Part No.AS800Y)
from
$7.99
Prestone® DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.
Product Features:
See More
Product Features:
- 50,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with High Grade Formula
- Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
- Synthetic, Extended Fluid Life Formula
Prestone – MAX DOT 4 Brake Fluid, 32 fl. oz., Synthetic, Highest Grade, 75,000 Mile (Part No.AS810)
from
$15.49
Prestone® MAX DOT 4 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 75,000 mile fluid life, our longest life fluid has 1.5X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 4, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 4 is safe to use in all DOT 4 braking systems, ABS, disc or drum, and can mix with any DOT 4 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 4. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.
Product Features:
See More
Product Features:
- 75,000 Mile Fluid Life
- Prevent Overheating & Brake Fade with Our Highest Grade Formula. Prevents corrosion of all metals within the braking system.
- Superior Protection in Extreme Braking Conditions
- Synthetic, Long Life Formula – 1.5X Longer than regular Prestone DOT 4
Pentosin – Super DOT 4 Brake Fluid: Safety Against Vapor Lock, Provides Superior Corrosion Resistance, 5 Liter (Part No.1204204)
from
$72.99
Pentosin Super DOT 4 is a brake fluid of superior quality for universal use in modern brake systems and ideal for vehicles with ABS systems. Pentosin Super DOT 4 offers safety against vapor lock; it has excellent resistance to absorbing and retaining water and provides superior corrosion resistance.
Product Features:
See More
Product Features:
- Safety against vapor lock
- Provides superior corrosion resistance
- Long-term resistance to absorbing and retaining water.
Pentosin – DOT 4 Brake Fluid: Safety Against Vapor Lock, Provides Superior Corrosion Resistance, 5 Liter (Part No.1224204)
from
$88.99
Pentosin DOT 4 LV is a special brake fluid of highest DOT 4 performance levels and extremely low viscosity at cold temperatures. It offers safety against vapor lock; it has excellent resistance to absorbing and retaining water and provides superior corrosion resistance. Pentosin DOT 4 LV Brake Fluid is ideal for all modern vehicles with ESP and ABS. DOT 4 LV can be used in all vehicles that require DOT 4 fluid. High safety margin against vapor lock. Long-term resistance to absorbing and retaining water. Superior corrosion resistance. Low viscosity fluid provides excellent flow performance at low temperature.
Product Features:
See More
Product Features:
- Safety against vapor lock
- Provides superior corrosion resistance
- Highest DOT 4 performance levels and extremely low viscosity at cold temperatures.
Prestone – Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz. (Part No.AS261Y/1)
from
$9.99
Prestone® Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.
Product Features:
See More
Product Features:
- 50,000 Mile Fluid Life
- Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
- For use in all manufacturers
- Conventional Formula – For use in all manufacturers
Prestone – Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 32 oz (Part No.AS263Y)
from
$10.49
Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.
Product Features:
See More
Product Features:
- 50,000 Mile Fluid Life
- Includes Stop Leak Additives to prevent and stop power steering system leaks.
- Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
- Conventional Formula – For use in all manufacturers
Pentosin – CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis (Part No.3J100337733PEN)
from
$30.66
CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis
Prestone – MAX Power Steering Fluid: European Vehicles, With Stop Leak, Enhances System Life, 100k miles, 12 oz (Part No.AS278)
from
$14.99
Prestone® MAX European Vehicles Power Steering Fluid (PSF) + Stop Leak maximizes and increases system life + the power to stop leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. This formula is also great at preventing leaks by rejuvenating seals before they leak. This synthetic fluid is designed with 2X Anti-wear System Protection, which means more protection against pump failure, squeals and clogs. 100,000 mile fluid life, 2X more than conventional fluid, extends the time between replacement. This fluid is formulated for European vehicle manufacturers: Audi, BMW, Jaguar, Mini, Porsche, Mercedes, Saab, Volvo, Volkswagen and others. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.
Product Features:
See More
Product Features:
- 100,000 Mile Fluid Life. Synthetic Formula for longer life and more protection
- MAX + Stop Leak. Stop Leak Additives to prevent and stop power steering system leaks.
- For use in European vehicle manufacturers: Audi, BMW, Jaguar, Mini, Porsche, Mercedes, Saab, Volvo, Volkswagen and others
- 2X Anti-Wear Protection for enhanced System Life vs. conventional fluid. More protection against pump failure, squeals and clogs
FRAM – Heavy Duty Antifreeze and Coolant: 50/50 Ready To Use, Universal , 1 Gallon (Part No.F201)
from
$15.99
Antifreeze Conventional Green 50/50 is an ethylene glycol-based product for use in car and light duty trucks that are already using a conventional coolant. The inhibitors prevent rust, corrosion, and provide freeze-up and boil-over protection. Prime Green 50/50 can be used to top-off cooling systems in vehicles using conventional AF/C, will not harm rubber parts, and meets ASTM D3306 and D4985 standards.
Product Features:
See More
Product Features:
- Low Silicate Formula.
- When used as directed, will provide protection for a minimum of 1 year
- Meets or exceeds ASTM requirements for cars, light duty trucks
- Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system
Peak – Original Equipment Euro Blue Antifreeze and Coolant: 50/50 Ready To Use, 1 Gallon (Part No.PEBB53)
from
$19.99
PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES is a line of premium coolants specifically designed to match the technology and color requirements of European vehicles. Each coolant is formulated with the same corrosion inhibitor technology that protected your vehicle straight from the factory. Color cues on the packaging and a list of covered vehicles on the front label make it easy to identify the right match for your specific vehicle. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES – BLUE is an ethylene glycol-based antifreeze/coolant specifically developed for use in any European vehicle requiring a Blue silicate-enhanced hybrid organic acid technology (Si-HOAT) formula. It contains high-quality organic and inorganic corrosion inhibitors and is free of nitrite, phosphate and amines chemicals. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES – BLUE meets the performance requirements of ASTM D3306 and BS 6580. With a complete flush and fill, PEAK guarantees this coolant will provide service life protection of up to 150,000 miles or 5 years.
Product Features:
See More
Product Features:
- Matches each European vehicle manufacturer’s technology and color requirements
- Protects all cooling system metals from rust and corrosion
- Meets the performance requirements of ASTM D3306 and BS 6580
- Service life of up to 5 years/150,000 miles with a complete cooling system flush and fill
- Color-coding and vehicle applications listed on the front simplify selecting the right antifreeze/coolant
- Available as both concentrate and 50/50 products to do the job right
- Testing Requirements: For proper freeze and boil over protection, use a traditional refractometer or hydrometer to measure the percentage of ethylene glycol by volume.
Prestone – Antifreeze and Coolant: Concentrate, Universal, Protects Against Buildup And Rust, 1 Gallon (Part No.AF2000)
from
$17.99
Prestone All Vehicles antifreeze+coolant (concentrate) is truly designed to work with all vehicles; all makes, models, years & fluid colors. It is designed to work with all new engines, while also being backwards compatible improving protection in all old
Product Features:
See More
Product Features:
- Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee – 10 Yr., 300,000 mile Extended life formula.
- Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
Peak – 10X Antifreeze + Coolant Concentrate for All Vehicles – 1 Gallon (Part No.PKP0B3)
from
$19.79
PEAK® Antifreeze + Coolant Concentrate is specially engineered to deliver guaranteed superior lifetime protection. Its advanced universal formula contains a proprietary blend of 10X the scale-fighting inhibitors coupled with robust organic additives to fight against the damaging effects of scale deposits and corrosion. PEAK Antifreeze + Coolant is free of 2-EHA, silicate, nitrite, borate, and amines, ensuring maximum cooling system performance for 10+ years/300,000+ miles. It is compatible for use with any color or type of antifreeze/coolant in the system.
Product Features:
See More
Product Features:
- Specially formulated to deliver Superior Lifetime Protection against damaging scale and corrosion
- Contains 10X the scale-fighting inhibitors to ensure maximum cooling system performance
- Provides more than 2X the warranty coverage for 10+ years/300,000+ miles of service
- Universal formula is compatible with any color or type of antifreeze/coolant
- Meets the performance requirements of ASTM D3306 and D4985
FRAM – Antifreeze & Coolant: Concentrate, Conventional Green, 1 Gallon (Part No.F101)
from
$18.99
FRAM Conventional Green Concentrate is an ethylene glycol-based product for use in car and light duty trucks that are already using a conventional coolant. The inhibitors prevent rust, corrosion, and provide freeze-up and boil-over protection. When used as directed, the Prime Green Concentrate Low Silicate formula provides full protection for a minimum of one year.
Product Features:
See More
Product Features:
- Low Silicate Formula
- When used as directed, will provide protection for a minimum of 1 year
- Meets or exceeds ASTM requirements for cars, light duty trucks
- Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
Valvoline – High Mileage with MaxLife Technology Synthetic Blend 5W-30 Motor Oil: Maximize Engine Life, 5 Quart (Part No.881163)
from
$29.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.
Product Features:
See More
Product Features:
- MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
- REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
- REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
- ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
- Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.
Valvoline – High Mileage with MaxLife Technology Synthetic Blend 5W-30 Motor Oil: Maximize Engine Life, 1 Quart (Part No.VV1556/VV155)
from
$9.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.
Product Features:
See More
Product Features:
- MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
- REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
- REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
- ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
- Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.
Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-40 Engine Oil: Maximize Engine Life, 5 Quart (Part No.782482)
from
$31.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.
Product Features:
See More
Product Features:
- Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
- Refresh aging seals and prevent leaks with seal conditioners
- Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
- Enhanced friction performance helps maximize power with advanced friction-fighting agents
- Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
- Anti-wear additives: The oil contains anti-wear additives that defend critical engine components against wear and tear, reducing the risk of expensive repairs.
Valvoline – Full Synthetic High Mileage with MaxLife Technology 10W-30 Engine Oil: Maximizes Engine Life, 1 Quart (Part No.VV180)
from
$11.99
Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.
Product Features:
See More
Product Features:
- Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
- Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
- 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
- Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
- Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
- Extends engine life: Valvoline Full Synthetic High Mileage with MaxLife Technology is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown
Valvoline – European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 1 Quart (Part No.VV966)
from
$11.49
European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.
Product Features:
See More
Product Features:
- Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
- Extra wear protection vs. industry and oem standards with advanced anti-wear additives
- Superior performance for european gasoline and diesel engines
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
- Superior engine sludge and varnish protection for European-made gasoline and diesel engines.
Pentosin – CHF 11S Hydraulic Fluid. Compatible with CHF 202. (Part No.1405116)
from
$44.99
Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extreme conditions and guarantees full performance from -40C to over 130C system temperature.
Product Features:
See More
Product Features:
- Ideal for cold weather climates.
- Operating temperature range from -40C to 130C
- Works perfectly under extreme temperature changes.
- Used by more then 25 global vehicle manufactures as OE first-fill.
Factory Air – 8 oz. Bottle Premium PAG 46 Oil w/o Dye (Part No.59007)
from
$13.49
Only compatible with R134a refrigerant; Tools required for installation; Plastic bottle; Universal applications
See More
Popular 2012 Porsche 911 Fluids and Chemicals Categories
2012 Porsche 911 Fluids and Chemicals
You count on your 2012 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fluids and Chemicals. With 22 Fluids and Chemicals ranging in price from $7.99 to $88.99, you’re sure to find everything you need for your 2012 Porsche 911.
Brands matter. If you want to shop a specific Fluids and Chemicals brand, we stock 6 different brands like Prestone, Fram, and PEAK. 2012 Porsche 911 Fluids and Chemicals start as low as $7.99!
One of the best ways to find top quality OEM or aftermarket Fluids and Chemicals is by asking professionals. Short of that, you can shop with confidence thanks to our 8,052 extensive product reviews on 2012 Porsche 911 Fluids and Chemicals. Some of the top-rated Fluids and Chemicals products we carry are CHF 11S Hydraulic Fluid. Compatible with CHF 202. with 4.8 stars and Pentofrost ++ Extended Life Antifreeze/Coolant (1.5 Liters) with 4.8 stars.
Did we mention you can order your Fluids and Chemicals from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fluids and Chemicals inventory for your 2012 Porsche 911 below to get started!
Top-Rated Fluids and Chemicals Brands For Your 2012 Porsche 911
Trusted Fluids and Chemicals OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2012 Porsche 911 running right for years to come. In our inventory you’ll find brands like Prestone, Fram, PEAK, and even more.
Popular Factory Air Fluids and Chemicals
You’ll find popular Factory Air brand products across Refrigerants. All are waiting to get your 2012 Porsche 911 back on the road. Some of the top-rated Factory Air products in these categories are:
Top-Rated Fluids and Chemicals
If are what you’re looking for, our inventory holds plenty. We stock brand Fluids and Chemicals for your 2012 Porsche 911, and some of our most reviewed parts include:
from
$11.49
(690)
European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 1 Quart
Manual Transmission Fluids
FAQs for 2012 Porsche 911 Fluids and Chemicals
What are the most purchased Fluids and Chemicals for the 2012 Porsche 911?
Out of 22 Fluids and Chemicals for the 2012 Porsche 911, the most popular in our inventory are:
from
$14.99
This product is not rated
Antifreeze and Coolant: 50/50 Ready To Use, Universal, Protects Against Corrosion, 1 Gallon
Engine Coolant and Antifreeze
from
$17.99
This product is not rated
Antifreeze and Coolant: Concentrate, Universal, Protects Against Buildup And Rust, 1 Gallon
Engine Coolant and Antifreeze
from
$13.99
This product is not rated
Antifreeze & Coolant: 50/50 Ready To Use, OE North American Gold, 1 Gallon
Engine Coolant and Antifreeze
What are the top-rated 2012 Porsche 911 Fluids and Chemicals?
Top-rated Fluids and Chemicals for your 2012 Porsche 911 based on customer reviews/ratings are:
from
$44.99
(69)
CHF 11S Hydraulic Fluid. Compatible with CHF 202.
“fluid is very hard to find at this price.”
from
$22.99
(29)
Pentofrost ++ Extended Life Antifreeze/Coolant (1.5 Liters)
“This takes care of my car since I upgraded my radiator!”
from
$69.99
(3)
Pentofrost ++ Extended Life Antifreeze/Coolant (5 Liters)
“This is a Volkswagen approved coolant/antifreeze. The thing I especially like about this is that it is a concentrate. To meet VW specs, it is to be ”
