2012 Peterbilt 330 Belts and Hoses

Essential Belts and Hoses for 2012 Peterbilt 330s

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89481)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$146.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life.
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Gates – FleetRunner« Heavy-Duty Automatic Belt Drive Tensioner (Part No.38702)

FleetRunner« Heavy-Duty Automatic Belt Drive Tensioner

from

$166.99
Product Features:
  • Optimized components engineered for maximum strength and durability
  • Patented design provides superior belt alignment and tension for improved drive efficiency and life
  • Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
  • Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
  • Double row bearings carry more load and last up to 3X longer than two individual bearings
  • Chrome-silicone round torsion spring for less ┐ex-fatigue than ┐at-spring designs
  • Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89445)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$91.99
For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing – a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89479)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$148.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life.
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Gates – FleetRunner½ Heavy-Duty Automatic Belt Drive Tensioner (Part No.38631)

FleetRunner½ Heavy-Duty Automatic Belt Drive Tensioner

from

$126.99
Product Features:
  • Optimized components engineered for maximum strength and durability
  • Patented design provides superior belt alignment and tension for improved drive efficiency and life
  • Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
  • Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
  • Double row bearings carry more load and last up to 3X longer than two individual bearings
  • Chrome-silicone round torsion spring for less +ex-fatigue than +at-spring designs
  • Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components
See More

Gates – FleetRunner½ Heavy-Duty Automatic Belt Drive Tensioner (Part No.38586)

FleetRunner½ Heavy-Duty Automatic Belt Drive Tensioner

from

$136.99
Product Features:
  • Optimized components engineered for maximum strength and durability
  • Patented design provides superior belt alignment and tension for improved drive efficiency and life
  • Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
  • Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
  • Double row bearings carry more load and last up to 3X longer than two individual bearings
  • Chrome-silicone round torsion spring for less +ex-fatigue than +at-spring designs
  • Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components
See More

Gates – FleetRunner½ Heavy-Duty Automatic Belt Drive Tensioner (Part No.38507)

FleetRunner½ Heavy-Duty Automatic Belt Drive Tensioner

from

$223.99
Product Features:
  • Optimized components engineered for maximum strength and durability
  • Patented design provides superior belt alignment and tension for improved drive efficiency and life
  • Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
  • Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
  • Double row bearings carry more load and last up to 3X longer than two individual bearings
  • Chrome-silicone round torsion spring for less +ex-fatigue than +at-spring designs
  • Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components
See More

Dayco – Poly Rib Belt Serpentine Belt; 53.75 Long, 6 Rib Count (Part No.5060538)

Poly Rib Belt Serpentine Belt; 53.75 Long, 6 Rib Count

from

$24.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 76.11 Long, 8 Rib Count, Heavy Duty (Part No.5080760)

Poly Rib Belt HD Serpentine Belt; 76.11 Long, 8 Rib Count, Heavy Duty

from

$50.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 77.56 Long, 8 Rib Count, Heavy Duty (Part No.5080775)

Poly Rib Belt HD Serpentine Belt; 77.56 Long, 8 Rib Count, Heavy Duty

from

$45.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 76.5" Long, 8 Rib Count, Exact Fit (Part No.K080760HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 76.5" Long, 8 Rib Count, Exact Fit

from

$76.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 76.58 Long, 8 Rib Count, Heavy Duty (Part No.5080765)

Poly Rib Belt HD Serpentine Belt; 76.58 Long, 8 Rib Count, Heavy Duty

from

$51.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 76.032" Long, 8 Rib Count, Exact Fit (Part No.K080755HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 76.032" Long, 8 Rib Count, Exact Fit

from

$50.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080806)

Micro-V« Serpentine Drive Belt

from

$49.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Straight Radiator Hoses; Silicone, HD, 2 1/4 Inch Inner Dia. (Sold by inch) (Part No.78225GL)

Straight Radiator Hoses; Silicone, HD, 2 1/4 Inch Inner Dia. (Sold by inch)

from

$5.49
Made with special silicone compounds and reinforced with a ply of braided polyester yarn, the Dayco straight radiator hose H.D. silicone sustains up to six times longer service life than an ordinary coolant hose when installed with a Dayco lined hose clamp. It has a temperature rating of -40 Deg. F (-40 Deg. C) to +350 Deg. F (+175 Deg. C) and is designed for a range of H.D. trucking applications where routing is relatively straight.

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Meets stringent OE specifications
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • PLEASE NOTE: Item is sold and priced by the inch. See store for details.
See More

Gates – Premium Molded Coolant Hose (Part No.21115)

Premium Molded Coolant Hose

from

$38.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Straight Radiator Hoses; Silicone, HD, 1 3/4 Inch Inner Dia. (Sold by foot) (Part No.78175GL)

Straight Radiator Hoses; Silicone, HD, 1 3/4 Inch Inner Dia. (Sold by foot)

from

$4.29
Made with special silicone compounds and reinforced with a ply of braided polyester yarn, the Dayco straight radiator hose H.D. – silicone sustains up to six times longer service life than an ordinary coolant hose when installed with a Dayco lined hose clamp. It has a temperature rating of -40 Deg. F (-40 Deg. C) to +350 Deg. F (+175 Deg. C) and is designed for a range of H.D. trucking applications where routing is relatively straight.

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Meets stringent OE specifications
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 2.25" Diameter (Part No.E72140)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 2.25" Diameter

from

$30.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Molded Coolant Hose (Part No.20397)

Premium Molded Coolant Hose

from

$48.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Straight Radiator Hoses; Silicone, HD, 2 1/2 Inch Inner Dia. (Sold by inch) (Part No.78250GL)

Straight Radiator Hoses; Silicone, HD, 2 1/2 Inch Inner Dia. (Sold by inch)

from

$6.29
Made with special silicone compounds & reinforced with a ply of braided polyester yarn, the Dayco straight radiator hose H.D. – silicone sustains up to six times longer service life than an ordinary coolant hose when installed with a Dayco lined hose clamp. It has a temperature rating of -40 Deg. F (-40 Deg. C) to +350 Deg. F (+175 Deg. C) and is designed for a range of H.D. trucking applications where routing is relatively straight.

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Meets stringent OE specifications
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • PLEASE NOTE: Item is sold and priced by the inch. See store for details.
See More

Gates – Molded Heater Hose: EPDM, Direct Fit, 2.5" Inside Diameter (Part No.21135)

Molded Heater Hose: EPDM, Direct Fit, 2.5" Inside Diameter

from

$52.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Straight Radiator Hoses; Silicone, Heavy Duty, 2 Inch Inner Dia. (Sold by foot) (Part No.78200GL)

Straight Radiator Hoses; Silicone, Heavy Duty, 2 Inch Inner Dia. (Sold by foot)

from

$4.99
Made with special silicone compounds and reinforced with a ply of braided polyester yarn, the Dayco straight radiator hose H.D. – silicone sustains up to six times longer service life than an ordinary coolant hose when installed with a Dayco lined hose clamp. It has a temperature rating of -40 Deg. F (-40 Deg. C) to +350 Deg. F (+175 Deg. C) and is designed for a range of H.D. trucking applications where routing is relatively straight.

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Meets stringent OE specifications
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Upgrade your 2012 Peterbilt 330 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2012 Peterbilt 330, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Peterbilt or enhancing its overall performance, Belts and Hoses are key to keeping your 330 functioning at its best. At Advance Auto Parts, we offer a wide selection of 10 Belts and Hoses for the 2012 Peterbilt 330, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Belt Tensioners upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2012 Peterbilt 330 at great prices. Our Belts and Hoses inventory for this model ranges from just $4.29 to $166.99, with an average price of $51.20. Our 10 Belts and Hoses in stock come from 4 trusted brands, so you’re sure to find the right part for your 2012 Peterbilt 330 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 2012 Peterbilt 330 is always ready to roll. We’re committed to providing you with everything you need to keep your 330 in top shape, all in one place. Start shopping confidently below for your 2012 Peterbilt 330!

Best-Selling Serpentine and V Belts for 2012 Peterbilt 330s

Enhance the driving experience in your Peterbilt with 4 quality Serpentine and V Belt components, starting at $23.99.

Dayco – Poly Rib Belt HD Serpentine Belt; 82.5 Long, 8 Rib Count, Heavy Duty (Part No.5080825)

Poly Rib Belt HD Serpentine Belt; 82.5 Long, 8 Rib Count, Heavy Duty

from

$32.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 83.125" Long, 8 Rib Count, Exact Fit (Part No.K080825HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 83.125" Long, 8 Rib Count, Exact Fit

from

$58.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080825)

Micro-V« Serpentine Drive Belt

from

$50.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Driveworks – Poly Rib Belt HD Serpentine Belt; 82.5 Long, 8 Rib Count, Heavy Duty (Part No.825K8)

Poly Rib Belt HD Serpentine Belt; 82.5 Long, 8 Rib Count, Heavy Duty

from

$23.99
This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements
See More

Most Popular 2012 Peterbilt 330 Belt Tensioners

Customize your Peterbilt with 2 Belt Tensioners products like Belt Tensioner Assemblies, all priced under $166.99.

Gates – FleetRunner« Heavy-Duty Automatic Belt Drive Tensioner (Part No.38702)

FleetRunner« Heavy-Duty Automatic Belt Drive Tensioner

from

$166.99
Product Features:
  • Optimized components engineered for maximum strength and durability
  • Patented design provides superior belt alignment and tension for improved drive efficiency and life
  • Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
  • Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
  • Double row bearings carry more load and last up to 3X longer than two individual bearings
  • Chrome-silicone round torsion spring for less ┐ex-fatigue than ┐at-spring designs
  • Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.910588A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$156.99
This Litens supplied tensioner is manufactured to original equipment specifications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Heavy duty steel pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Top Picks for 2012 Peterbilt 330 Engine Cooling Hoses

Upgrade Peterbilt 330s with top-quality Engine Cooling Hoses parts, including 2 OEM and aftermarket selections for your 2012 model.

Dayco – Straight Radiator Hoses; Silicone, HD, 2 1/4 Inch Inner Dia. (Sold by inch) (Part No.78225GL)

Straight Radiator Hoses; Silicone, HD, 2 1/4 Inch Inner Dia. (Sold by inch)

from

$5.49
Made with special silicone compounds and reinforced with a ply of braided polyester yarn, the Dayco straight radiator hose H.D. silicone sustains up to six times longer service life than an ordinary coolant hose when installed with a Dayco lined hose clamp. It has a temperature rating of -40 Deg. F (-40 Deg. C) to +350 Deg. F (+175 Deg. C) and is designed for a range of H.D. trucking applications where routing is relatively straight.

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Meets stringent OE specifications
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • PLEASE NOTE: Item is sold and priced by the inch. See store for details.
See More

Dayco – Straight Radiator Hoses; Silicone, HD, 1 3/4 Inch Inner Dia. (Sold by foot) (Part No.78175GL)

Straight Radiator Hoses; Silicone, HD, 1 3/4 Inch Inner Dia. (Sold by foot)

from

$4.29
Made with special silicone compounds and reinforced with a ply of braided polyester yarn, the Dayco straight radiator hose H.D. – silicone sustains up to six times longer service life than an ordinary coolant hose when installed with a Dayco lined hose clamp. It has a temperature rating of -40 Deg. F (-40 Deg. C) to +350 Deg. F (+175 Deg. C) and is designed for a range of H.D. trucking applications where routing is relatively straight.

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Meets stringent OE specifications
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

In-Demand Radiator Hoses for 2012 Peterbilt 330s

Select from 2 premium Radiator Hoses parts for your 2012 Peterbilt 330, with prices ranging from $4.99 to $6.29.

Dayco – Straight Radiator Hoses; Silicone, Heavy Duty, 2 Inch Inner Dia. (Sold by foot) (Part No.78200GL)

Straight Radiator Hoses; Silicone, Heavy Duty, 2 Inch Inner Dia. (Sold by foot)

from

$4.99
Made with special silicone compounds and reinforced with a ply of braided polyester yarn, the Dayco straight radiator hose H.D. – silicone sustains up to six times longer service life than an ordinary coolant hose when installed with a Dayco lined hose clamp. It has a temperature rating of -40 Deg. F (-40 Deg. C) to +350 Deg. F (+175 Deg. C) and is designed for a range of H.D. trucking applications where routing is relatively straight.

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Meets stringent OE specifications
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Dayco – Straight Radiator Hoses; Silicone, HD, 2 1/2 Inch Inner Dia. (Sold by inch) (Part No.78250GL)

Straight Radiator Hoses; Silicone, HD, 2 1/2 Inch Inner Dia. (Sold by inch)

from

$6.29
Made with special silicone compounds & reinforced with a ply of braided polyester yarn, the Dayco straight radiator hose H.D. – silicone sustains up to six times longer service life than an ordinary coolant hose when installed with a Dayco lined hose clamp. It has a temperature rating of -40 Deg. F (-40 Deg. C) to +350 Deg. F (+175 Deg. C) and is designed for a range of H.D. trucking applications where routing is relatively straight.

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Meets stringent OE specifications
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • PLEASE NOTE: Item is sold and priced by the inch. See store for details.
See More

FAQs for 2012 Peterbilt 330 Belts and Hoses

Which Belts and Hoses are best-sellers for 2012 Peterbilt 330s?

Out of 10 Belts and Hoses that fit 2012 Peterbilt 330s, the following parts are the top sellers:

What’s the price range for 2012 Peterbilt 330 Belts and Hoses?

Belts and Hose prices for the 2012 Peterbilt 330 start at $4.29 and go up to $166.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2012 Peterbilt 330?

The average price for Belts and Hoses for the 2012 Peterbilt 330 is $51.20. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Peterbilt 330 model years?

Yes, we currently carry Belts and Hoses for 26 model years of Peterbilt 330s between 1995 and 2022. Belts and Hoses are bought most frequently for the following model years: 2022, 2021, 2018, 2017, 2016, 2015, 2014, 2011, and 2010.

What types of Belts and Hoses do you sell for my 2012 Peterbilt 330?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2012 Peterbilt 330:

Can I get help with 2012 Peterbilt 330 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Peterbilt Belts and Hoses and more.

What is your return policy for Peterbilt 330 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Peterbilt 330 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.