2012 Nissan Titan Exhaust Parts
More 2012 Nissan Titan Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 2012 Nissan Titan, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 2012 Nissan Titan Exhaust Parts
MAHLE Original – EXHAUST MANIFOLD GAS (Part No.MS19526)
from
$26.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10673-01)
from
$24.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.83401)
from
$449.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
Walker – Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed (Part No.16489)
from
$559.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker® Ultra® Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
aFe POWER – Rebel Series Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-46126-B)
from
$1160.99
aFe Power introduces an all new Rebel Series dual middle-side exit exhaust system for the 2016-2017 Nissan Titan with V8-5.6L engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 2-1/2″ MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system.
Product Features:
See More
Product Features:
- 2.5 in. Mandrel Bent Stainless Steel Tubing
- Unique Dual 3.5 in. Black Stainless Steel Tips
- High Flow Muffler
- Aggressive Sound
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15582)
from
$1145.99
The MagnaFlow 2007-2015 Nissan Titan Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.6L 2007-2015 Nissan TITAN with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 2.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Nissan TITAN exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Nissan TITAN’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15582 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15582 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
BRExhaust – Exhaust Clamp (Part No.250-058)
from
$6.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2 (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
JBA Performance – 1400SJT 1 5/8" Header Shorty Stainless Steel 04-14 Nissan Titan 5.6L Titanium Ceramic (Part No.1400SJT)
from
$757.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1400SJT 1 5/8″ Header Shorty Stainless Steel 04-14 Nissan Titan 5.6L Titanium Ceramic
- Mandrel bent stainless steel tube
Walker – EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed (Part No.16479)
from
$761.99
Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker® Ultra® EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- STRONG AND DURABLE — Features thick OE-style flanges and manifolds for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
Walker – Ring Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31585)
from
$4.29
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.61773)
from
$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.32111)
from
$25.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)
from
$206.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Excellent choice for large displacement vehicles
- Improved horsepower, torque and potential mileage improvement
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.47843)
from
$228.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Original Equipment – Exhaust Pipe Stud (Part No.H60071155667OEA)
from
$4.14
Exhaust Pipe Stud
Walker – Ring Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31576)
from
$4.29
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31311)
from
$3.29
Complete your exhaust repair with Walker∩┐╜ gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walkern++ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Intermediate Pipe Aluminized 16.625" (Part No.52505)
from
$46.49
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Intermediate Pipe Aluminized 25.5" (Part No.53477)
from
$55.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Tail Pipe Aluminized 47.25" (Part No.54650)
from
$103.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Dynomax – 36474 Exhaust Pipe Spout (Part No.36474)
from
$51.99
Customize your exhaust system with a DynoMax® stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.
Product Features:
See More
Product Features:
- CUSTOM LOOK — Enhance your exhaust system with this tip that features an embossed DynoMax® logo
- SINGLE-WALL DESIGN — Features one layer of premium 304 polished stainless steel that is slant-cut for a sleek look
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of sizes to work with a wide range of exhaust systems
- EASY TO INSTALL — Clamp-on installation for an easy upgrade
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
BRExhaust – Direct-Fit Premium Tail Pipe (Part No.800-035)
from
$100.99
If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one and last even longer, this pipe is engineered to meet OE specs to ensure precise, factory-like fit, performance and reliability. This part features a direct-fit design to enable easy installation. BRExhaust exhaust pipes are designed for easy bolt-on installations. The use of mandrel-bent steel of at least 16-gauge thickness eliminates the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance.
Product Features:
See More
Product Features:
- Bolt-on installation
- Direct-fit replacement
- Produced using precision-manufacturing for easy fitment
- High quality, durable steel construction
- Protects against corrosion to allow for a long service life
- Fully aluminized
- Easy bolt-on installation
Dorman – Double Ended Stud – M10-1.50 x 27mm and M10-1.50 x 12mm (Part No.29224)
from
$6.29
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 2012 Nissan Titan Exhaust Parts Categories
2012 Nissan Titan Exhaust Parts
You count on your 2012 Nissan Titan to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 46 Exhaust Parts ranging in price from $1.99 to $1,160.99, you’re sure to find everything you need for your 2012 Nissan Titan.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 13 different brands like Walker, Felpro, and Dorman. 2012 Nissan Titan Exhaust Parts start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 728 extensive product reviews on 2012 Nissan Titan Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are 50 Series Muffler, 2.25in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound with 5.0 stars and Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed with 2.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2012 Nissan Titan below to get started!
Top-Rated Exhaust Parts Brands For Your 2012 Nissan Titan
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2012 Nissan Titan running right for years to come. In our inventory you’ll find brands like Walker, Felpro, Dorman, and even more.
Popular Felpro Exhaust Parts
You’ll find popular Felpro brand products across Exhaust Pipes. All are waiting to get your 2012 Nissan Titan back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 2012 Nissan Titan, and some of our most reviewed Walker parts include:
from
$2.79
(37)
2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
from
$4.29
(22)
Ring Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
from
$4.29
(9)
Ring Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Catalytic Converter Gaskets
FAQs for 2012 Nissan Titan Exhaust Parts
What are the most purchased Exhaust Parts for the 2012 Nissan Titan?
Out of 46 Exhaust Parts for the 2012 Nissan Titan, the most popular in our inventory are:
What are the top-rated 2012 Nissan Titan Exhaust Parts?
Top-rated Exhaust Parts for your 2012 Nissan Titan based on customer reviews/ratings are:
from
$185.99
(2)
50 Series Muffler, 2.25in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound
“Just the sound I was looking for. Relatively quiet though the gears and cruising but sounds pretty throaty when stomped on. It difficult to make a 6 c”
from
$228.99
(2)
Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed
“Not stainless steel as advertised. Just normal Walker tubing, much thinner than factory. OD of this exhaust is 2 inches. OD of stock was 2 1/8. No”
from
$221.99
(1)
70 Series Muffler – 2.25 Dual In / 3.00 Center Out – Mild Sound
“Haven’t installed yet”
