2012 Mitsubishi Eclipse Suspension Parts

Below you will find various in-demand Mitsubishi Suspension Parts, components and accessories for your 2012 Eclipse. Advance Auto Parts has popular Eclipse parts like Control Arms, Coil and Leaf Springs, Suspension Hardwares and more. You’ll also find aftermarket and OEM Suspension Parts for other Eclipse model years including 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 and more. Select a category of 2012 Mitsubishi Eclipse Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2012 Mitsubishi Eclipse Suspension Parts Categories

Suspension Strut and Coil Spring Assemblies

Rear Shock and Struts

Lateral Links

Shock Boots, Levelers, and Accessories

Lower Control Arm Bushings

Strut Bellows

Strut Mounts

Suspension Knuckle Bushings

Essential Suspension Parts for 2012 Mitsubishi Eclipses

from

$66.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$78.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$61.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$109.99

Complete Strut Assem

from

$166.99

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. An all-in-one solution, the Monroe Quick-Strut strut assembly simplifies the installation process by including all the required components in a single unit. With a heritage of delivering leading-edge products for over 100 years, you can count on Monroe for your next repair.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference Guarantee

from

$167.99

Engineered to get more miles from your vehicle, the RoadMatic® strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR — Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
GET MORE MILES FROM YOUR RIDE — Engineered and fit and ride tested to meet OE spec
EASY TO INSTALL — Fully integrated design reduces installation time, eliminating the need for a spring compressor
CONSISTENT PERFORMANCE — Features nitrogen gas-charge and all-weather fluid for improved ride and handling
COVERAGE — Available for domestic and import passenger cars, light trucks and SUVs
BUY WITH CONFIDENCE — Comes with a limited warranty. Visit Monroe.com for details.

from

$11.49

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$6.99

Designed to meet or exceeds OE performance specifications.

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$21.99

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$41.99

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$12.29

Designed to meet or exceeds OE performance specifications.

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$249.99

This lateral arm and ball joint assembly is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$119.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Prevents tire noise and vibration

from

$19.99

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$23.99

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$77.99

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$149.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$113.99

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference Guarantee

from

$82.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING – Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE – Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER – Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference

from

$94.99

Complete Strut Assem

from

$90.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

The No.1 recommended Original Equipment replacement choice for Asian performance vehicles
Specifically calibrated to help restore the original handling and control characteristics of your Mitsubishi Eclipse
Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
Triple chrome plated piston rod and multi-lip oil seals that reduce wear
Features a precision, sintered iron strut rod guide to help retain correct wheel alignment
Engineered to help vehicles with electronic safety systems (ESC, ABS, etc.)
Protect your new struts from dirt, debris and salt with a KYB Strut Boot, part number: SB101

from

$162.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$36.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$42.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$32.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$35.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$48.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$37.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

Upgrade your 2012 Mitsubishi Eclipse with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2012 Mitsubishi Eclipse, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mitsubishi or enhancing its overall performance, Suspension Parts are key to keeping your Eclipse functioning at its best. At Advance Auto Parts, we offer a wide selection of 13 Suspension Parts for the 2012 Mitsubishi Eclipse, designed to meet your needs without breaking the bank. From Control Arm replacements to Coil and Leaf Springs upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2012 Mitsubishi Eclipse at great prices. Our Suspension Parts inventory for this model ranges from just $11.49 to $249.99, with an average price of $78.47. Our 13 Suspension Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2012 Mitsubishi Eclipse without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Mitsubishi Eclipse, we stock popular OEM and aftermarket Suspension Parts from top names like Driveworks, and more. Driveworks Suspension Parts start at just $12.29 and boast an impressive 4.2 stars average rating from customers. With 217 customer reviews and counting, our 2012 Mitsubishi Eclipse Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Mitsubishi Eclipse is always ready to roll. We’re committed to providing you with everything you need to keep your Eclipse in top shape, all in one place. Start shopping confidently below for your 2012 Mitsubishi Eclipse!

Best-Selling Control Arms for 2012 Mitsubishi Eclipses

Enhance the driving experience in your Mitsubishi with 2 quality Control Arm components, starting at $26.49.

show more show less

from

$249.99

This lateral arm and ball joint assembly is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$26.49

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

Top Picks for 2012 Mitsubishi Eclipse Suspension Hardware

Upgrade Mitsubishi Eclipses with top-quality Suspension Hardware parts, including 1 OEM and aftermarket selections for your 2012 model.

show more show less

from

$11.49

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

In-Demand Shocks and Struts for 2012 Mitsubishi Eclipses

Select from 9 premium Shocks and Struts parts for your 2012 Mitsubishi Eclipse, with prices ranging from $12.29 to $162.99.

show more show less

from

$12.29

Designed to meet or exceeds OE performance specifications.

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$21.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$36.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$41.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$19.99

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$90.99

The No.1 recommended Original Equipment replacement choice for Asian performance vehicles
Specifically calibrated to help restore the original handling and control characteristics of your Mitsubishi Eclipse
Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
Triple chrome plated piston rod and multi-lip oil seals that reduce wear
Features a precision, sintered iron strut rod guide to help retain correct wheel alignment
Engineered to help vehicles with electronic safety systems (ESC, ABS, etc.)
Protect your new struts from dirt, debris and salt with a KYB Strut Boot, part number: SB101

from

$77.99

PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$162.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$113.99

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference Guarantee

Top-Rated Suspension Parts Brands For Your 2012 Mitsubishi Eclipse

Shop for the best-rated brands offering Suspension Parts and other products for your 2012 Mitsubishi Eclipses. Below you’ll find some of our best rated Suspension Parts from Driveworks, and more. Suspension Parts from these brands that fit a 2012 Eclipse start at just $12.29 and are rated as high as 4.2 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Driveworks 2012 Mitsubishi Eclipse Suspension Parts

When it comes to maintaining or upgrading your 2012 Mitsubishi Eclipse, using quality Suspension Parts is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Suspension Parts, specifically designed for the 2012 Mitsubishi Eclipse. With over 1 Driveworks brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.29. Plus, with over 13 customer reviews and an average rating of 4.2 stars, you can trust that our Driveworks Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $12.29

(13)

STRUT BOOT KIT

“Good replacement part but didn’t need”

FAQs for 2012 Mitsubishi Eclipse Suspension Parts

Which Suspension Parts are best-sellers for 2012 Mitsubishi Eclipses?

Out of 13 Suspension Parts that fit 2012 Mitsubishi Eclipses, the following parts are the top sellers:

Strut Bellows (20518181) – $36.99
Jounce Bumper and Bellows (19170663) – $21.99
Strut-Mate Rear; Front Suspension Strut Bumper and Bellows Kit (99985232) – $41.99

What’s the price range for 2012 Mitsubishi Eclipse Suspension Parts?

Suspension Part prices for the 2012 Mitsubishi Eclipse start at $11.49 and go up to $249.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2012 Mitsubishi Eclipse?

The average price for Suspension Parts for the 2012 Mitsubishi Eclipse is $78.47. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Mitsubishi Eclipse model years?

Yes, we currently carry Suspension Parts for 21 model years of Mitsubishi Eclipses between 1990 and 2011. Suspension Parts are bought most frequently for the following model years: 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, and 2003.

What are the cheapest Suspension Parts for my 2012 Mitsubishi Eclipse?

The cheapest 2012 Mitsubishi Eclipse Suspension Parts we carry in stock are:

Suspension Knuckle Bushing (10981065) – $11.49
STRUT BOOT KIT (11049894) – $12.29
Strut-Mate Suspension Strut Mount Bushing Kit (18570445) – $19.99
Jounce Bumper and Bellows (19170663) – $21.99
Control Arm Bushing (12244762) – $26.49

What are the top-rated Suspension Parts that fit the 2012 Mitsubishi Eclipse?

Out of 217 reviews by customers, our 2012 Mitsubishi Eclipse Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2012 Mitsubishi Eclipse and their top-rated products:

Shocks and Struts
- STRUT BOOT KIT (11049894) – $12.29
- Jounce Bumper and Bellows (19170663) – $21.99
- Strut Bellows (20518181) – $36.99

What types of Suspension Parts do you sell for my 2012 Mitsubishi Eclipse?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 2012 Mitsubishi Eclipse:

Can I get help with 2012 Mitsubishi Eclipse Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mitsubishi Suspension Parts and more.

What is your return policy for Mitsubishi Eclipse Suspension Parts?

Advance Auto Parts keeps returns simple. For new Mitsubishi Eclipse Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Mitsubishi Eclipse Suspension Parts

Energy Suspension – Control Arm Bushing Set (Part No.5.3138R)

Energy Suspension – Control Arm Bushing Set (Part No.5.3108G)

Energy Suspension – Control Arm Bushing Set (Part No.5.3118G)

Suncore – Complete Strut Assem (Part No.55S11191)

Monroe – Quick-Strut Suspension Strut and Coil Spring Assembly (Part No.572147)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.182147)

Dorman – Suspension Knuckle Bushing (Part No.905-202)

Driveworks – Strut Bellow (Part No.DW-K90462)

KYB – Jounce Bumper and Bellows (Part No.SB101)

Monroe – Strut-Mate Rear; Front Suspension Strut Bumper and Bellows Kit (Part No.63628)

Driveworks – STRUT BOOT KIT (Part No.DW-K90460)

Dorman – Suspension Lateral Arm and Ball Joint Assembly (Part No.527-145)

Rare Parts – Strut Mount (Part No.RP18972)

Monroe – Strut-Mate Suspension Strut Mount Bushing Kit (Part No.902923)

Monroe – Strut-Mate Suspension Strut Mount Stud Plate (Part No.909947)

Monroe – Strut-Mate Suspension Strut Mount (Part No.908944)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.710781)

Monroe – Quick-Strut Suspension Strut and Coil Spring Assembly (Part No.271145)

Monroe – OESpectrum Suspension Strut (Part No.71276)

Suncore – Complete Strut Assem (Part No.55S15940)

KYB – Gas Strut (Part No.341404)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920005)

MOOG – Strut Bellows (Part No.K90460)

Monroe – Strut-Mate Suspension Strut Bumper and Bellows Kit (Part No.63619)

KYB – Jounce Bumper and Bellows (Part No.SB103)

MOOG – Strut Bellows (Part No.K90462)

Monroe – Strut-Mate Front; Rear Suspension Strut Bumper and Bellows Kit (Part No.63631)

KYB – Jounce Bumper and Bellows (Part No.SB108)

Dorman – Suspension Lateral Arm and Ball Joint Assembly (Part No.527-145)

Rare Parts – Control Arm Bushing (Part No.RP22345)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920005)

Dorman – Suspension Knuckle Bushing (Part No.905-202)

Driveworks – STRUT BOOT KIT (Part No.DW-K90460)

KYB – Jounce Bumper and Bellows (Part No.SB101)

MOOG – Strut Bellows (Part No.K90460)

Monroe – Strut-Mate Rear; Front Suspension Strut Bumper and Bellows Kit (Part No.63628)

Monroe – Strut-Mate Suspension Strut Mount Bushing Kit (Part No.902923)

KYB – Gas Strut (Part No.341404)

Monroe – Strut-Mate Suspension Strut Mount (Part No.908944)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.920005)

Monroe – Quick-Strut Suspension Strut and Coil Spring Assembly (Part No.271145)