2012 Mini Cooper Fuel and Emissions Systems
Find Your Specific 2012 Mini Cooper Fuel and Emissions Systems
Below you will find various in-demand Mini Fuel and Emissions Systems, components and accessories for your 2012 Cooper. Advance Auto Parts has popular Cooper parts like Fuel Injectors, Oxygen Sensors, Gas Caps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Cooper model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2012 Mini Cooper Fuel and Emissions Systems below and start saving instantly.
Popular 2012 Mini Cooper Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 2012 Mini Coopers
ACDelco – Multi-Purpose Pigtail (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, andor engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
DENSO – Wideband Oxygen Sensor: 5 Wire, 14.29" Long, Heated, Exact Fit (Part No.234-5135)
from
$213.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement¿ and a first time fit.; DENSO gives you the right part and the right fit¿ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Multi-Purpose Relay (Part No.RAA1794)
from
$21.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Carquest Premium – Fuel Injector Seal (Part No.AS057)
from
$12.99
Product Features:
See More
- Premium OE quality materials
- Includes upper o-ring
- Includes nylon split ring
- Includes combustion seal
Felpro – Fuel Injector O-Ring Kit (Part No.ES 73214)
from
$42.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Fuel Vapor Leak Detection Pump (Part No.310-235)
from
$204.99
This evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications
- Restores functionality – reliable replacement for an original part that has clogged or failed due to emissions control system damage
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1098)
from
$44.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Dorman – Mechanical Vacuum Pump or Fuel Pump (Part No.904-819)
from
$388.99
This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.
Product Features:
See More
Product Features:
- Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions
- Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on testing to ensure a quality fit
Carquest Premium – Fuel Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10844)
from
$40.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Multi-Purpose Relay (Part No.RAA1749)
from
$39.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
DENSO – Oxygen Sensor: 4 Wire, 24.45" Long, Heated, Exact Fit (Part No.234-4457)
from
$163.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Fuel Cap Tester Adapter: (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
aFe POWER – Sprint Booster (Part No.77-16307)
from
$407.99
Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver’s disposal.
Product Features:
See More
Product Features:
- Reduces Throttle Response Time
- Improves Acceleration
- Easy To Install
- Does Not Affect The Vehicles Electronic System
Victor Reinz – Fuel Injection Throttle Body Mounting Gasket (Part No.71-37628-00)
from
$7.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Carquest Premium – Multi-Use Connector (Part No.ABA3461)
from
$13.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Continental – Fuel Pump Module Assembly (Part No.228226007003Z)
from
$322.99
Continental fuel modules are a genuine OEM part. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. Continental fuel modules are designed for long service life and simplified installation. They are built in OE ISO TS certified facilities and manufactured to the highest quality standards. They offer dependable performance and robust design by being a genuine OEM part while still maintaining a competitive price.
See More
Carquest Premium – Premium GDI Seal Tool Kit (Part No.ATK-001)
from
$129.99
This premium tool kit is designed to ensure the correct installation of the combustion seal on Gasoline Direct Injectors (GDI), which require replacement any time the injector is reinstalled. This special tool allows for the expansion of the combustion seal to allow installation onto the injector’s tip and resizing tools to provide precise dimensioning to ensure proper combustion sealing. Constructed of high-quality stainless steel the tool will provide years of trouble-free service and can be used on over 100 unique styles of GDI injectors.
Product Features:
See More
Product Features:
- Includes two expansion cones
- Includes two resizing tools
- Includes one seal installation collet
- Includes hard case
- Includes instruction manual
Bosch – Pressure Sensor (Part No.0261230135)
from
$72.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
Bosch – Pressure Sensor (Part No.0261230253)
from
$33.49
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
Delphi – Mass Air Flow Sensor (Part No.AF10418)
from
$134.99
Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
- Delphi OE technology validated to match the vehicle applications
Rein – GDI Fuel Injection Pipe (Part No.RFP0005)
from
$47.99
Rein OE Quality GDI Fuel Feed Pipe is designed to be a direct replacement of the OE high pressure fuel feed lines used in today’s GDI systems. These lines reside between the high pressure fuel pump and the fuel rail and are constantly exposed to a very harsh, high pressure environment; hence, the manufacturer requires replacement of the fuel feed pipes each time the high pressure side of the system is opened. Rein’s OE quality GDI fuel feed pipes ensure that the system is properly sealed and function as per the manufacturers specifications and design.
Product Features:
See More
Product Features:
- Matches OE Fit, Form, and Function
- Must replace fuel pipe every time the High Pressure side of the system is opened
- Ensures that proper pressure is maintained between the High Pressure Fuel Pump and Fuel Rail
- Made to strict engineering quality standards.
Bosch – Fuel Injector: New (Part No.62806)
from
$67.99
Bosch is a leading manufacture for Gasoline Direct Injection application now provides the market with the solution for servicing the Injectors after being removed from the cylinder head. It is are recommended to replace the seals once the injectors are serviced as they are one time use. All Set of seal and kit bags come complete with all the necessary parts for a successful installation.
Product Features:
See More
Product Features:
- OE supplier, provides exact flow and original spray pattern for optimal performance
- Enhances a homogeneous and lean-burn combustion
- Key enabler for engine downsizing, while maintaining desired horsepower
- High-pressure fuel is injected directly into the combustion chamber
- Maintains new-car smoothness and drivability
Carquest – Fuel Injector Connector (Part No.PT2318)
from
$4.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
Carquest Premium – Diverter Valve (Part No.ECC1422)
from
$97.99
The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions and convert the emission into harmless water vapor via a chemical reaction. These systems were used heavily in the pre-catalytic converter emission control period but found some application in vehicles with catalytic converter systems.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Rein – New High Pressure Fuel Pump (Part No.HPG50704F)
from
$1279.99
New High Pressure Fuel Pump
Upgrade your 2012 Mini Cooper with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2012 Mini Cooper, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mini or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Cooper functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Fuel and Emissions Systems for the 2012 Mini Cooper, designed to meet your needs without breaking the bank.
From
Fuel Injector
replacements to
Oxygen Sensors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2012 Mini Cooper at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $4.29 to $1,279.99, with
an average price of $125.99.
Our 40 Fuel and Emissions Systems in stock come from 13 trusted brands, so you’re sure to find the right part for your 2012 Mini Cooper without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Mini Cooper, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Bosch, NTK, Carquest, and more.
Bosch Fuel and Emissions Systems
start at just $33.49 and boast an impressive 4.7 stars average rating from customers.
NTK and Carquest also bring quality to the table, with Fuel and Emissions Systems available starting at $4.29, and at an average 4.6 stars rating.
With 556 customer reviews and counting, our 2012 Mini Cooper Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2012 Mini Cooper is always ready to roll. We’re committed to providing you with everything you need to keep your Cooper in top shape, all in one place.
Start shopping confidently below for your 2012 Mini Cooper!
Best-Selling Fuel Injectors for 2012 Mini Coopers
Enhance the driving experience in your Mini with 14 quality Fuel Injector components, starting at $4.29.
Carquest – Fuel Injector Connector (Part No.PT2318)
from
$4.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)
from
$6.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Bosch – Mass Air Flow (MAF) Sensor (Part No.0280218241)
from
$159.99
Mass Air Flow Sensor
Product Features:
See More
Product Features:
- OE Technology provides the correct function and calibration to ensure trouble-free operation and emission compliance.
- 100% new product
- Not re-manufactured or rebuilt
- Sensor and housing are calibrated and sold together ensuring precise sensor reading and optimal engine performance
- Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions
- Can provide up to 20 percent better fuel consumption
Felpro – Fuel Injector O-Ring Kit (Part No.ES 73214)
from
$42.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
aFe POWER – Sprint Booster (Part No.77-16307)
from
$407.99
Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver’s disposal.
Product Features:
See More
Product Features:
- Reduces Throttle Response Time
- Improves Acceleration
- Easy To Install
- Does Not Affect The Vehicles Electronic System
Bosch – Mass Air Flow (MAF) Sensor (Part No.0280218228)
from
$271.99
Bosch is the actual OE manufacture, plus or minus 5% deviation from OE specification can set a check engine light.
Product Features:
See More
Product Features:
- OE Technology provides the correct function and calibration to ensure trouble-free operation and emission compliance.
- 100% new product
- Not re-manufactured or rebuilt
- Sensor and housing are calibrated and sold together ensuring precise sensor reading and optimal engine performance
- Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions
- Can provide up to 20 percent better fuel consumption
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ7424)
from
$146.99
CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Delphi – Mass Air Flow Sensor (Part No.AF10418)
from
$134.99
Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
- Delphi OE technology validated to match the vehicle applications
Carquest Premium – Premium GDI Seal Tool Kit (Part No.ATK-001)
from
$129.99
This premium tool kit is designed to ensure the correct installation of the combustion seal on Gasoline Direct Injectors (GDI), which require replacement any time the injector is reinstalled. This special tool allows for the expansion of the combustion seal to allow installation onto the injector’s tip and resizing tools to provide precise dimensioning to ensure proper combustion sealing. Constructed of high-quality stainless steel the tool will provide years of trouble-free service and can be used on over 100 unique styles of GDI injectors.
Product Features:
See More
Product Features:
- Includes two expansion cones
- Includes two resizing tools
- Includes one seal installation collet
- Includes hard case
- Includes instruction manual
Carquest Premium – Reman Multi Port Fuel Injector (Part No.A212-2815)
from
$89.99
The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Rein – GDI Fuel Injection Pipe (Part No.RFP0005)
from
$47.99
Rein OE Quality GDI Fuel Feed Pipe is designed to be a direct replacement of the OE high pressure fuel feed lines used in today’s GDI systems. These lines reside between the high pressure fuel pump and the fuel rail and are constantly exposed to a very harsh, high pressure environment; hence, the manufacturer requires replacement of the fuel feed pipes each time the high pressure side of the system is opened. Rein’s OE quality GDI fuel feed pipes ensure that the system is properly sealed and function as per the manufacturers specifications and design.
Product Features:
See More
Product Features:
- Matches OE Fit, Form, and Function
- Must replace fuel pipe every time the High Pressure side of the system is opened
- Ensures that proper pressure is maintained between the High Pressure Fuel Pump and Fuel Rail
- Made to strict engineering quality standards.
Victor Reinz – Fuel Injection Throttle Body Mounting Gasket (Part No.71-37628-00)
from
$7.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Victor Reinz – Fuel Injection Throttle Body Mounting Gasket (Part No.71-37631-00)
from
$5.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Carquest Premium – Fuel Injector Connector (Part No.PTA1064)
from
$4.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Most Popular 2012 Mini Cooper Oxygen Sensors
Customize your Mini with 6 Oxygen Sensors products
like Oxygen Sensors, all
priced under $207.99.
NTK – Switching Oxygen Sensor: 4 Wire, 17.5" Long, Heated, Direct Fit (Part No.25198)
from
$119.99
NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Wideband Oxygen Sensor: 5 Wire, 27.95" Long, Heated, Exact Fit (Part No.17187)
from
$204.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Advanced Wideband sensing element for exact air/fuel measurement
- Robust sensor design increases sensor longevity
- Seared protection tube due to 100% functional quality test
- True Direct-fit
- Pre-coated threads with anti-seize compound right out of the box
Bosch – Oxygen Sensor: 4 Wire, 17.72" Long, Heated, Exact Fit (Part No.15379)
from
$169.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Bosch – Wideband Oxygen Sensor: 5 Wire, 26.77" Long, Heated, Exact Fit (Part No.17112)
from
$199.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Advanced Wideband sensing element for exact air/fuel measurement
- Robust sensor design increases sensor longevity
- Seared protection tube due to 100% functional quality test
- True Direct-fit
- Pre-coated threads with anti-seize compound right out of the box
Bosch – Wideband Oxygen Sensor: 5 Wire, 12.6" Long, Heated, Exact Fit (Part No.17010)
from
$179.99
Bosch is the world¿s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Advanced Wideband sensing element for exact air/fuel measurement
- Robust sensor design increases sensor longevity
- Seared protection tube due to 100% functional quality test
- True Direct-fit OE connectors and harness
- Recommend to use OTC 6500 Flexihead O2 Sensor Wrench
DENSO – Oxygen Sensor: Downstream, 4 Wire, 17.52" Long, Heated, Exact Fit (Part No.234-4488)
from
$207.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Top Picks for 2012 Mini Cooper Gas Caps
Upgrade Mini Coopers with top-quality Gas Caps parts, including 2 OEM and aftermarket selections for your 2012 model.
Rein – Cap-Fuel (Part No.CPF0031)
Carquest Premium – Fuel Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10844)
from
$40.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
In-Demand Air Flow Sensors for 2012 Mini Coopers
Select from 8 premium Air Flow Sensors parts for your 2012 Mini Cooper, with prices ranging from $13.99 to $138.99.
Bosch – Pressure Sensor (Part No.0261230254)
from
$34.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
Bosch – Pressure Sensor (Part No.0261230253)
from
$33.49
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
Carquest Premium – Multi-Purpose Relay (Part No.RAA1749)
from
$39.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1098)
from
$44.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Carquest Premium – Multi-Use Connector (Part No.ABA3461)
from
$13.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – Multi-Purpose Pigtail (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, andor engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
DENSO – Wideband Oxygen Sensor: 5 Wire, 26.26" Long, Heated, Exact Fit (Part No.234-5136)
from
$138.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement¿ and a first time fit.; DENSO gives you the right part and the right fit¿ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Turbocharger Boost Sensor (Part No.ECA2413)
from
$40.99
The turbocharger is an exhaust driven engine modifier that is designed to force more air or oxygen into the combustion chamber than a normally aspirated engine could on its own. The Turbocharger Boost Sensor reports the boost pressure in the system when the wastegate opens allowing boosted air into the engine.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Most Sold 2012 Mini Cooper Fuel Pumps
Explore our best-selling Mini parts for the 2012 Cooper among 6 OEM and aftermarket options starting from $43.99.
Rein – New High Pressure Fuel Pump (Part No.HPG50704F)
from
$1279.99
New High Pressure Fuel Pump
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1175)
from
$554.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1994)
from
$489.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
URO Parts – Fuel Pump Assembly (Part No.16112755082)
from
$199.99
For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products. URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.
See More
Carquest Premium – Evaporative Emissions System Leak Detection Pump (Part No.VDC1019)
from
$113.99
Keep your EVAP system in check and ensure top-tier emissions control with Carquest’s high-performance Leak Detection Pumps. Built for accuracy and durability, these Leak Detection Pumps offer reliable performance, compliance with strict emission standards, and simple, direct fit installation. For dependable, eco-friendly performance, trust Carquest Leak Detection Pumps to protect your vehicle and the environment.
Product Features:
See More
Product Features:
- The pump plays a critical role in identifying leaks in the EVAP system, preventing harmful fuel vapors from escaping into the atmosphere
- Designed to create precise vacuum, ensuring accurate identification of leaks for enhanced vehicle performance
- Equipped with integrated sensors that continuously monitor pressure levels, allowing for immediate detection of any leaks or malfunctions
- Meets or exceeds all OEM specifications
Carquest Premium – Fuel Cap Tester Adapter: (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Top-Rated Fuel and Emissions Systems Brands For Your 2012 Mini Cooper
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2012 Mini Coopers. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, NTK, and Carquest, and more. Fuel and Emissions Systems from these brands that fit a 2012 Cooper start at just $4.29 and are rated as high as 4.7 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Bosch 2012 Mini Cooper Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2012 Mini Cooper, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 2012 Mini Cooper. With over 2 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $33.49, with an average price of just $34.24. Plus, with over 19 customer reviews and an average rating of 4.7 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$34.99
(1)
Pressure Sensor
“I needed just an extra inch of lift to level the truck when the trailer was attached. This kit did just that. The quality and finish of the componen”
Popular NTK 2012 Mini Cooper Fuel and Emissions Systems
NTK auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2012 Mini Cooper owner should feel confident when installing genuine NTK parts in their vehicle. To ensure the best fit and performance for your 2012 Cooper, Advance Auto Parts carries a full inventory of 1 NTK Fuel and Emissions Systems. Plus you will be keeping your Mini in peak condition while saving money because prices on these NTK Fuel and Emissions Systems range up to $119.99, plus, with more than 1 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
from
$119.99
(1)
Switching Oxygen Sensor: 4 Wire, 17.5" Long, Heated, Direct Fit
“Replaced and is working great! Glad it was in stock at a location not too far away so I could pick it up and get the wife’s Mini back up and running q”
FAQs for 2012 Mini Cooper Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 2012 Mini Coopers?
Out of 40 Fuel and Emissions Systems that fit 2012 Mini Coopers, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Fuel Injector Connector (11477998) – $4.29
- Fuel Injector Seal Kit (11692627) – $6.99
What’s the price range for 2012 Mini Cooper Fuel and Emissions Systems?
Fuel and Emissions System prices for the 2012 Mini Cooper start at $4.29 and go up to $1,279.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 2012 Mini Cooper?
The average price for Fuel and Emissions Systems for the 2012 Mini Cooper is $125.99. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Mini Cooper model years?
What are the cheapest Fuel and Emissions Systems for my 2012 Mini Cooper?
The cheapest 2012 Mini Cooper Fuel and Emissions Systems we carry in stock are:
- Fuel Injector Connector (11477998) – $4.29
- Fuel Injector Connector (12541458) – $4.99
- Fuel Injection Throttle Body Mounting Gasket (12588045) – $5.79
- Fuel Injector Seal Kit (11692627) – $6.99
- Fuel Injection Throttle Body Mounting Gasket (12575876) – $7.79
What are the top-rated Fuel and Emissions Systems that fit the 2012 Mini Cooper?
Out of 556 reviews by customers, our 2012 Mini Cooper Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2012 Mini Cooper and their top-rated products:
- Air Flow Sensors
- Pressure Sensor (10647233) – $34.99
- Pressure Sensor (10647212) – $33.49
- Oxygen Sensors
- Pressure Sensor (10647233) – $34.99
- Pressure Sensor (10647212) – $33.49
What types of Fuel and Emissions Systems do you sell for my 2012 Mini Cooper?
As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2012 Mini Cooper:
Can I get help with 2012 Mini Cooper Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mini Fuel and Emissions Systems and more.
What is your return policy for Mini Cooper Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Mini Cooper Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
