2012 Mazda 3 Shocks and Struts

Essential 2012 Mazda 3 Shocks and Struts

KYB – High Pressure Monotube Gas Shock (Part No.553389)

High Pressure Monotube Gas Shock

from

$109.99
The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • The Correct, Monotube-Designed Orem Replacement
  • The KYB Gas-A-Just Helps Restore The Designed Control And Handling Of The Mazda 3
  • Gas-A-Just Monotubes Are Designed For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
  • To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5619
  • Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb125
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5683)

OESpectrum Passenger Car Shock Absorber

from

$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • Premium – Limited Lifetime Warranty
  • For Commercial Usage Refer to Product Warranty
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5607)

OESpectrum Passenger Car Shock Absorber

from

$59.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Bilstein – B4 OE Replacement – Shock Absorber (Part No.L4000845971BIL)

B4 OE Replacement - Shock Absorber

from

$79.28
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Product Features:
  • Constant damping characteristics under any load
  • Consistent performance and handling give the vehicle a new car feel every time
  • Proven BILSTEIN gas pressure technology
  • High OEM quality standards
See More

Whiteline – Brace Strut Tower (Part No.KSB633)

Brace Strut Tower

from

$231.99
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.

Product Features:
  • Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
  • Hand picked Whiteline bushings and/or alignment, geometry products best suiting your vehicle.
See More

Dorman – Strut Bearing and Plate (Part No.924-419)

Strut Bearing and Plate

from

$57.99
This suspension strut mount bearing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – STRUT MOUNT (Part No.RP53653)

STRUT MOUNT

from

$109.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Meets or exceeds OE requirements
  • Helps restore vehicle ride.
  • Reduces tire wear
See More

MOOG – Suspension Strut Mount (Part No.K160228)

Suspension Strut Mount

from

$74.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • High polish chrome steel bearing races
  • Replacement helps restore vehicle handling
  • Superior rubber to steel bonding for durability
  • Engineered to meet or exceed OE requirements
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172264)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$182.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
See More

MANDO – New Complete Strut Assembly (Part No.MSS050080)

New Complete Strut Assembly

from

$97.99
HL Mando is the Original Equipment manufacturer to offer a Complete Strut Assembly to the traditional automotive aftermarket. Save time & energy without the need for coil spring compressor tools, choose HL Mando Complete Strut replacements.

Product Features:
  • Precision Engineered by OE Suspension System Manufacturer
  • Tested for Quality, Durability, and Reliability
See More

Monroe – OESpectrum Strut (Part No.73016)

OESpectrum Strut

from

$168.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
  • Premium – Limited Lifetime Warranty
  • For Commercial Usage Refer to Product Warranty
See More

Monroe – Gas-Matic Strut (Part No.82264)

Gas-Matic Strut

from

$92.99
Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

KYB – Complete Corner Unit Assembly -Strut, Mount and Spring (Part No.SR4458)

Complete Corner Unit Assembly -Strut, Mount and Spring

from

$199.99
A strut assembly handles vehicle weight, determines ride height, acts as the steering pivot, controls vehicle stability and can affect a vehicles electronic crash avoidance systems. As an original equipment supplier, KYB understands how your vehicle should ride, handle and perform. The KYB Strut-Plus is engineered to help restore the handling and control capabilities of your vehicle. We start with an Original Equipment (OE) Restoring KYB Strut. High carbon steel coil springs are developed considering vehicle attributes and corners weights to help make sure the ride height is restored within OE specifications.

Product Features:
  • #1 Recommended Original Equipment Replacement Choice For Asian Vehicles
  • Designed For Proper Ride Height And Original Handling Capabilities On Your Mazda 3
  • Includes A KYB Excel-G Strut, A Stronger Steel Outer Shell And KYB’S Application Specific Precision Designed Damping Valves
  • Winner Of 2018 Best Overall Import Aftermarket Product
  • Assembled In Use
  • Exact Fitment Engineered And Pre-Assembled For Professional Results
  • Features An Application Engineered KYB Spring Designed To Match The Strut, Maintain Proper Ride Height Longer And Control Weight Without Sacrificing Vehicle Ride Quality
  • Left And Right Part Numbers With Side-Specific Design And Components, As The Vehicle Manufacturer Intended
  • Engineered To Help Vehicles With Electronic Safety Systems (Esc, Abs, Etc.)
See More

KYB – Jounce Bumper and Bellows (Part No.SB101)

Jounce Bumper and Bellows

from

$18.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

KYB – Jounce Bumper and Bellows (Part No.SB125)

Jounce Bumper and Bellows

from

$35.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

KYB – Jounce Bumper and Bellows (Part No.SB110)

Jounce Bumper and Bellows

from

$25.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63636)

Strut-Mate Strut Boot Kit

from

$30.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63632)

Strut-Mate Strut Boot Kit

from

$29.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

MOOG – Strut Bellows (Part No.K90460)

Strut Bellows

from

$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Engineered to meet or exceed OE requirements
  • Incorporates proven design and engineering features
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Rare Parts – Shock Mount (Part No.RP53627)

Shock Mount

from

$61.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
See More

Dorman – Suspension Shock Mount (Part No.924-412HP)

Suspension Shock Mount

from

$52.99
The original upper shock mount on certain vehicles is made of aluminum that corrodes and cracks. This Dorman OE FIX replacement features upgraded high-strength steel to prevent future failures.

Product Features:
  • Suspension Shock Mount
  • Suspension Shock Mount
  • The original upper shock mount on certain vehicles is made of aluminum that corrodes and cracks. This Dorman OE FIX replacement features upgraded high-strength steel to prevent future failures.
  • Upgraded design – this replacement shock mount features durable steel to improve upon the original aluminum construction
  • Application specific – designed to match the original shock mount on certain Ford, Lincoln and Mazda vehicles
See More

Dorman – Suspension Shock Mount (Part No.924-412)

Suspension Shock Mount

from

$31.99
This replacement shock mount is designed to directly replace the mount that comes stock on specified vehicle years, makes and models. It is precisely reverse-engineered to ensure original equipment quality, fit and durability.

Product Features:
  • Direct replacement – this shock mount is precision-engineered to match the fit and durability of the original shock mount on specific vehicles
  • Complete kit – all necessary mounting hardware is included with each mount
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Proactive repair – it’s often smart to replace shock mounts when replacing worn out shocks
See More

KYB – STRUT BELLOW (Part No.L303734949KYB)

STRUT BELLOW

from

$27.49
STRUT BELLOW

KYB – Shock Mount (Part No.SM5619)

Shock Mount

from

$31.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The Highest Quality Replacement Strut Mount Available
  • Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
  • Superior Rubber Reduces Noise, Vibration And Harshness
  • Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
  • Matched Grade Studs And Nuts
See More

MOOG – Shock Mount (Part No.K160229)

Shock Mount

from

$27.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to meet or exceed OE requirements
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

2012 Mazda 3 Shocks and Struts

Maybe you’re in the middle of a full rebuild of that 2012 Mazda 3. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 33 different Shocks and Struts in our inventory ranging from $13.29 to $445.05. That means you can find the exact parts or products you need to keep that 2012 Mazda 3 running smoothly.

Shocks and Struts are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Mazda 3. Monroe, Dorman, and Moog are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Shocks and Struts for your 2012 Mazda 3, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 830 reviews in this category, some of the top rated parts include OESpectrum Strut with 4.9 stars and Complete Strut Assembly: Includes Strut, Coil Spring, and Mount with 4.2 stars.

So if you’re in the market for aftermarket Shocks and Struts to keep your 2012 Mazda 3 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Shocks and Struts Brands To Make Your 2012 Mazda 3 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Mazda 3 demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your 3 the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.

Popular KYB Shocks and Struts

We carry KYB parts in our stock across Shock Mounts categories, plus more. For a 2012 Mazda 3, our most popular KYB Shocks and Struts include:
Shock Mount
from $31.99
(1)
Shock Mount
Shock Mounts

FAQs for 2012 Mazda 3 Shocks and Struts

What are the most purchased Shocks and Struts for the 2012 Mazda 3?

Out of 33 Shocks and Struts for the 2012 Mazda 3, the most popular in our inventory are:
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
from $135.99
(6)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Front Shock and Struts
Shock Mount
from $27.99
(6)
Shock Mount
Shock Mounts
Suspension Shock Mount
from $31.99
(8)
Suspension Shock Mount
Shock Mounts

What are the top-rated 2012 Mazda 3 Shocks and Struts?

Top-rated Shocks and Struts for your 2012 Mazda 3 based on customer reviews/ratings are:
OESpectrum Strut
from $106.99
(7)
OESpectrum Strut
“Exact replacement for my Mazda5 at half the cost of OEM. It rides like new again. Just be sure to replace the strut mounts and spring insulator at t”
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
from $182.99
(5)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
“Taking off a spring/strut combo is not easy! I learned that the hard way. At least the new one was easy to put back on. Something I learned online was”
OESpectrum Strut
from $106.99
(5)
OESpectrum Strut
“GOOD PART”