2012 Mazda 2 Wheel Bearings
More 2012 Mazda 2 Wheel Bearings
Find your specific 2012 Mazda 2 original or aftermarket Wheel Bearings below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2012 Mazda 2 Wheel Bearings
National – Bearings (Part No.205-FF)
from
$20.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Timken – Wheel Hub Assembly (Part No.K7001387188TIM)
from
$288.96
Timken Wheel Hub Assembly is a single integrated unit that can be bolted directly onto corners, eliminating the need for conventional components like washers, spacers and nuts. Its design provides for lower total system cost, improved performance, reduced weight and lower warranty costs. The Formed Hub utilizes fewer components over conventional 4 x 2 designs, simplifying installation and reducing costs.
Product Features:
See More
Product Features:
- Allows the same configuration to be used on driven and non-driven wheels, replacing the conventional 4×2 (dead) spindle.
- Features an advanced sensor and sensor technology for superb performance.
- Holds bearing setting more consistently than traditional thread and nut designs. The resulting system stiffness reduces rotor run-out and improves brake performance.
- Reduces weight by up to 20% per assembly compared to conventional wheel end solutions.
- Features an active sensor capable of sensing down to zero speed. Sensor’s speed information can be used for vehicle dynamics control systems, speed control, speedometer, odometer, trip computer and other purposes.
- Internally-mounted sensor protects against the elements, which ultimately reduces warranty costs. SENSOR-PAC also utilizes very small sensor-to-target wheel gaps, enabling a much smaller and more cost- effective sensor.
- Includes an internally-mounted sensor that protects against debris, corrosion, thermal shock, and other hazards that threaten externally-mounted sensors.
- Designed for superior performance in a minimal space. Timken engineers have packaged the sensor within the bearing without increasing overall dimensions to promote high performance and equal load carrying capacity in a minimum space.
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.510056)
from
$54.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- EASY TO INSTALL — SureSignal technology features magnetic encoders on both sides of the bearing to eliminate installation error
- BUILT TO LAST — Advanced heat treatment process for strength
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
SKF – Wheel Hub Assembly (Part No.K7001387188SKF)
from
$288.96
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. SKF wheel hub bearing units carry a flange for wheel and brake rotor attachment and a second flange for fixing the unit to the suspension. This fully integrated system provides a significant simplification in corner design and handling when compared with more traditional designs. The dynamic load carrying capacity is maximized by the use of a separate inner ring for the inboard ball row. This ring is mounted with an interference fit. The outer ring flange is bolted to the suspension. The rotating inner ring, with its tough flange, spigot and threaded holes or studs, is designed for mounting of the brake and wheel. Greased and sealed for life, the SKF wheel hub assembly is used for both driven and non-driven wheel applications. For driven wheel applications, torque is transmitted to the inner ring via an included spline.
Product Features:
See More
Product Features:
- OE sensors assure correct ABS functions
- Premium seals, both inboard and outboard, protect the bearing
- Wheel bearing design with ball bearings or tapered roller bearings and integral wheel hub.
- The bearing units have preset internal clearance, are supplied greased for life and have integrated seals.
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.512468)
from
$143.99
Product Features:
See More
- Innovative roll form design ensures consistent and optimal preload.
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
FAG US – WHEEL BEARING (Part No.801663AA)
from
$62.99
WHEEL BEARING
Meyle – Wheel Hub Assembly (Part No.K7001387188MEY)
from
$179.03
Wheel Hub Assembly
Timken – Wheel Bearing (Part No.K8000333016TIM)
from
$87.53
Timken fuel efficient bearings are used in automotive axles to improve fuel economy, reduce weight, lower operating temperatures, minimize noise and increase reliability. Engineered surfaces help protect bearing components by minimizing skidding and sliding damage while withstanding small-particle contamination.
Product Features:
See More
Product Features:
- OE Quality
- Made from quality Timken certified steel
- Design features original equipment technology that optimizes bearing performance and lengthens maintenance intervals
- Design allows bearings to carry evenly distributed loads
- Power dense design reduces bearing weight
- Controlled set-up torque helps you achieve more accurate settings, resulting in the highest axle performance possible. Installation Note: Some bearings contain active wheel sensors. These wheel sensors normally work together with magnetic ABS sensor rings. These sensor rings have a magnetic north and south poles lying next to each other in its circumference. These magnetic poles must always lie opposite the wheel sensor. If, the wheel bearing is installed improperly, the system wheel sensor and magnetic sensor gear cannot supply a signal making the ABS system inoperable. The ATE Test Card for Magnetic Sensor Gears will assist in prevention of these errors. PN# 760130 ATE
Dorman – Wheel Bearing – Front And Rear (Part No.951-814)
from
$49.49
This wheel bearing is designed to match the fit and function of the original part on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing is designed to match the fit and function of the original part on specified vehicles.
- Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-510056)
from
$32.99
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Popular 2012 Mazda 2 Wheel Bearings Categories
2012 Mazda 2 Wheel Bearings
Maybe you’re in the middle of a full rebuild of that 2012 Mazda 2. Maybe you just need a couple of Wheel Bearings. Either way, Advance Auto Parts has 10 different Wheel Bearings in our inventory ranging from $20.99 to $288.96. That means you can find the exact parts or products you need to keep that 2012 Mazda 2 running smoothly.
Wheel Bearings are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2012 Mazda 2. Driveworks, National, and Meyle are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Wheel Bearings for your 2012 Mazda 2, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Wheel Bearings to keep your 2012 Mazda 2 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Wheel Bearings Brands To Make Your 2012 Mazda 2 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2012 Mazda 2 demands trusted brand parts and products to keep it running. Many trusted brands of Wheel Bearings make up Advance Auto Parts’ inventory, and all are ready to help make your 2 the best it can be. Be sure to browse some of our top Wheel Bearings brands and parts.
Popular Driveworks Wheel Bearings
We carry Driveworks parts in our stock across Front Wheel Bearings categories, plus more. For a 2012 Mazda 2, our most popular Driveworks Wheel Bearings include:
Top 2012 Mazda 2 Wheel Bearings from National
National products are another trusted brand when it comes to Wheel Bearings for your 2012 Mazda 2. Popular National parts include:
FAQs for 2012 Mazda 2 Wheel Bearings
What are the most purchased Wheel Bearings for the 2012 Mazda 2?
Out of 10 Wheel Bearings for the 2012 Mazda 2, the most popular in our inventory are:
