2012 Lincoln Navigator Exhaust Parts
Find Your Specific 2012 Lincoln Navigator Exhaust Parts
Below you will find various in-demand Lincoln Exhaust Parts, components and accessories for your 2012 Navigator. Advance Auto Parts has popular Navigator parts like Exhaust Pipes, Exhaust Fittings, Exhaust Hangers and more. You’ll also find aftermarket and OEM Exhaust Parts for other Navigator model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 2012 Lincoln Navigator Exhaust Parts below and start saving instantly.
Popular 2012 Lincoln Navigator Exhaust Parts Categories
Essential Exhaust Parts for 2012 Lincoln Navigators
MagnaFlow – Universal HM Grade Federal / EPA Compliant Catalytic Converter (Part No.99206HM)
from
$179.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Compact, lightweight construction enables installation in confined areas, welding is required
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Durable 308 stainless steel MIG welds
MagnaFlow – Direct-Fit California Grade CARB Compliant Catalytic Converter (Part No.4451166)
from
$1280.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4451166. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2005 Lincoln Navigator 5.4L. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Dorman – Exhaust Manifold Heat Shield (Part No.674-697HS)
from
$15.99
Replace a loose or missing exhaust manifold heat shield without replacing the manifold itself. This direct replacement heat shield has been dimensionally verified to match the original and undergone material testing to ensure a reliable service life.
Product Features:
See More
Product Features:
- Effective replacement – designed to match the fit and function of the stock exhaust manifold heat shield on specific vehicle applications
- Durable construction – this heat shield is made of stamped steel to withstand underhood heat and conditions
- Cost-effective solution – replaces a damaged or missing heat shield without replacing the exhaust manifold
- Precision-engineered – has undergone dimensional verification and material testing to ensure quality
Walker – Exhaust Clamp (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS : Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS : Made from quality material for durability and long life
- BETTER TOGETHER : Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Help – Exhaust Stud Kit – M10-1.5 x 72mm (Part No.03131)
from
$16.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Flange Hardware Kit (Part No.03117)
from
$16.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust Pipe 2.75" Inlet (ID) 2.75" Outlet (OD) (Part No.53855)
from
$70.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Dorman – Help – Cap Screw-Hex Head-Grade 8- 1/2-13 x 2-1/2 In. (Part No.03411)
from
$16.29
Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03412)
from
$39.99
Dorman’s Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust Tail Pipe 2.75" Inlet (ID) (Part No.52506)
from
$129.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe (Part No.55991)
from
$315.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Walker – Exhaust Pipe, Pipe Diameter 3" (Part No.74041)
from
$54.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.), Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Dorman – Direct Fit Exhaust Manifold: with Heat Shield (Part No.674-697XD)
from
$170.99
Want to make sure your new exhaust manifold performs better and lasts longer than the original? No need to buy a replacement and get it specially coated. This manifold comes with a specialized ceramic coating that more evenly distributes heat, both helping to prevent thermal cracking as well as enabling smoother exhaust gas flow. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Premium replacement – this exhaust manifold features a specialized ceramic coating designed to improve durability and performance on select vehicles
- Reduces future failures – by evenly distributing heat, coating reduces uneven hot and cold spots that lead to cracks, and decreases inconsistent expanding and contracting that leads to gasket failures
- Optimizes performance – made to smooth the interior manifold surface and keep heat within the manifold, leading to higher exhaust velocity and optimal operation
- Improves appearance – coating is highly corrosion-resistant, maintaining like-new appearance for years while other cast manifolds show significant unsightly rust
Dorman – Direct Fit Exhaust Manifold: with Heat Shield (Part No.674-695XD)
from
$236.99
Want to make sure your new exhaust manifold performs better and lasts longer than the original? No need to buy a replacement and get it specially coated. This manifold comes with a specialized ceramic coating that more evenly distributes heat, both helping to prevent thermal cracking as well as enabling smoother exhaust gas flow. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Premium replacement – this exhaust manifold features a specialized ceramic coating designed to improve durability and performance on select vehicles
- Reduces future failures – by evenly distributing heat, coating reduces uneven hot and cold spots that lead to cracks, and decreases inconsistent expanding and contracting that leads to gasket failures
- Optimizes performance – made to smooth the interior manifold surface and keep heat within the manifold, leading to higher exhaust velocity and optimal operation
- Improves appearance – coating is highly corrosion-resistant, maintaining like-new appearance for years while other cast manifolds show significant unsightly rust
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-694XD)
from
$182.99
Want to make sure your new exhaust manifold performs better and lasts longer than the original? No need to buy a replacement and get it specially coated. This manifold comes with a specialized ceramic coating that more evenly distributes heat, both helping to prevent thermal cracking as well as enabling smoother exhaust gas flow. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Premium replacement – this exhaust manifold features a specialized ceramic coating designed to improve durability and performance on select vehicles
- Reduces future failures – by evenly distributing heat, coating reduces uneven hot and cold spots that lead to cracks, and decreases inconsistent expanding and contracting that leads to gasket failures
- Optimizes performance – made to smooth the interior manifold surface and keep heat within the manifold, leading to higher exhaust velocity and optimal operation
- Improves appearance – coating is highly corrosion-resistant, maintaining like-new appearance for years while other cast manifolds show significant unsightly rust
MAHLE Original – Exhaust Manifold Gasket Set (Part No.MS19261)
from
$32.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Exhaust Manifold Gasket Set (Part No.MS 98017)
from
$26.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97337)
from
$131.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310070)
from
$84.99
Vibe Lock Header Bolt Kit
Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75118)
from
$28.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Dorman – Help – Exhaust Manifold Mount Hardware – M8-1.25mm Stainless Steel (OE Fix) (Part No.03411HP)
from
$31.99
The factory-style fasteners used to secure the exhaust manifold to the cylinder head on certain vehicles are prone to cracking and failure from extreme thermal cycles and corrosion. This convenient Dorman OE FIX hardware kit contains ten application-specific M8-1.25 studs and nuts made of 100 percent stainless steel that provide superior strength and resistance to corrosion. These fasteners are precision-manufactured to match the fit and function of the original equipment hardware, and help ensure a professional and more durable repair. The kit contains the studs and nuts required to install one exhaust manifold.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of ten M8-1.25 exhaust manifold mounting studs and nuts are 100 percent stainless steel for superior heat and corrosion resistance
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust Pipe Flange Gasket (Part No.31622)
from
$13.79
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-13664-00)
from
$6.79
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Dana engineering-approved for fit, form and function
- Meets or exceeds OE specifications
Felpro – Exhaust Pipe Flange Gasket (Part No.61155)
from
$6.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842543)
from
$168.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Center Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.43041)
from
$101.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Delta 40 Muffler, 3in Offset Inlet 3in Center Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.843041)
from
$169.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Upgrade your 2012 Lincoln Navigator with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2012 Lincoln Navigator, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lincoln or enhancing its overall performance, Exhaust Parts are key to keeping your Navigator functioning at its best. At Advance Auto Parts, we offer a wide selection of 33 Exhaust Parts for the 2012 Lincoln Navigator, designed to meet your needs without breaking the bank.
From
Exhaust Pipe
replacements to
Exhaust Fittings
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2012 Lincoln Navigator at great prices.
Our Exhaust Parts inventory for this model
ranges from just $3.99 to $1,646.99, with
an average price of $286.36.
Our 33 Exhaust Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 2012 Lincoln Navigator without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Lincoln Navigator, we stock popular OEM and aftermarket Exhaust Parts from top names
like Dorman Walker, and more.
Dorman Exhaust Parts
start at just $14.99 and boast an impressive 4.2 stars average rating from customers.
With 119 customer reviews and counting, our 2012 Lincoln Navigator Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2012 Lincoln Navigator is always ready to roll. We’re committed to providing you with everything you need to keep your Navigator in top shape, all in one place.
Start shopping confidently below for your 2012 Lincoln Navigator!
Best-Selling Exhaust Pipes for 2012 Lincoln Navigators
Enhance the driving experience in your Lincoln with 3 quality Exhaust Pipe components, starting at $13.79.
Walker – Exhaust Pipe Flange Gasket (Part No.31622)
from
$13.79
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe 2.75" Inlet (ID) 2.75" Outlet (OD) (Part No.53855)
from
$70.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Tail Pipe 2.75" Inlet (ID) (Part No.52506)
from
$129.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Most Popular 2012 Lincoln Navigator Exhaust Fittings
Customize your Lincoln with 3 Exhaust Fittings products
like Exhaust Clamps, all
priced under $8.99.
Walker – Exhaust Clamp (Part No.35793)
from
$3.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS : Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS : Made from quality material for durability and long life
- BETTER TOGETHER : Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Clamp (Part No.250-070)
from
$5.79
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards. To ensure a gas-tight connection and a secure suspension, we always recommend the replacement of the mounting parts when fitting a new exhaust.
Product Features:
See More
Product Features:
- BRExhaust also develops the installation hardware to the same standards.
Top Picks for 2012 Lincoln Navigator Exhaust Hangers
Upgrade Lincoln Navigators with top-quality Exhaust Hangers parts, including 1 OEM and aftermarket selections for your 2012 model.
Dorman – Help – Exhaust Flange Hardware Kit (Part No.03117)
from
$16.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
In-Demand Exhaust Mufflers for 2012 Lincoln Navigators
Select from 2 premium Exhaust Mufflers parts for your 2012 Lincoln Navigator, with prices ranging from $163.99 to $199.99.
Walker – Quiet-Flow SS Direct Fit Exhaust Muffler Assembly (Part No.55339)
from
$163.99
Product Features:
See More
- CORROSION RESISTANT STAINLESS STEEL – The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and welding
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL – OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED – Acoustic and flow tested for quality OE-style sound you can count on
- BUY WITH CONFIDENCE – Comes with Walker’s limited warranty and exclusive 90-Day Safe and Sound Guarantee. Visit Walkerexhaust.com for details.
BRExhaust – Exhaust Muffler Assembly (Part No.100-8537)
from
$199.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle-while the interior design of the muffler box ensures quiet performance.
See More
Most Sold 2012 Lincoln Navigator Exhaust Manifold and Headers
Explore our best-selling Lincoln parts for the 2012 Navigator among 9 OEM and aftermarket options starting from $15.99.
Dorman – Exhaust Manifold Kit – Includes Required Gaskets and Hardware (OE Fix) (Part No.674-695)
from
$152.99
Certain original equipment exhaust manifolds warp and crack due to lower-grade iron construction. This Dorman OE FIX replacement is made of high-grade ductile iron that better handles heat and stress for greater durability.
Product Features:
See More
Product Features:
- Upgraded materials – this replacement exhaust manifold is constructed of ductile iron to prevent future warping and cracking
- Complete kit – includes new manifold, 2 manifold gaskets, 2 studs, 2 nuts
- Direct fit – reverse engineered from original equipment for seamless installation
- Quality engineering – designed and tested in the United States
Dorman – Help – Exhaust Manifold Mount Hardware – M8-1.25mm (Part No.03430)
from
$26.99
Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Direct Fit Exhaust Manifold: with Heat Shield (Part No.674-697)
from
$124.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75118)
from
$28.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310070)
from
$84.99
Vibe Lock Header Bolt Kit
Dorman – Direct Fit Exhaust Manifold: with Heat Shield (Part No.674-695XD)
from
$236.99
Want to make sure your new exhaust manifold performs better and lasts longer than the original? No need to buy a replacement and get it specially coated. This manifold comes with a specialized ceramic coating that more evenly distributes heat, both helping to prevent thermal cracking as well as enabling smoother exhaust gas flow. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Premium replacement – this exhaust manifold features a specialized ceramic coating designed to improve durability and performance on select vehicles
- Reduces future failures – by evenly distributing heat, coating reduces uneven hot and cold spots that lead to cracks, and decreases inconsistent expanding and contracting that leads to gasket failures
- Optimizes performance – made to smooth the interior manifold surface and keep heat within the manifold, leading to higher exhaust velocity and optimal operation
- Improves appearance – coating is highly corrosion-resistant, maintaining like-new appearance for years while other cast manifolds show significant unsightly rust
Dorman – Direct Fit Exhaust Manifold: with Heat Shield (Part No.674-697XD)
from
$170.99
Want to make sure your new exhaust manifold performs better and lasts longer than the original? No need to buy a replacement and get it specially coated. This manifold comes with a specialized ceramic coating that more evenly distributes heat, both helping to prevent thermal cracking as well as enabling smoother exhaust gas flow. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Premium replacement – this exhaust manifold features a specialized ceramic coating designed to improve durability and performance on select vehicles
- Reduces future failures – by evenly distributing heat, coating reduces uneven hot and cold spots that lead to cracks, and decreases inconsistent expanding and contracting that leads to gasket failures
- Optimizes performance – made to smooth the interior manifold surface and keep heat within the manifold, leading to higher exhaust velocity and optimal operation
- Improves appearance – coating is highly corrosion-resistant, maintaining like-new appearance for years while other cast manifolds show significant unsightly rust
Dorman – Help – Exhaust Manifold Mount Hardware – M8-1.25mm Stainless Steel (OE Fix) (Part No.03411HP)
from
$31.99
The factory-style fasteners used to secure the exhaust manifold to the cylinder head on certain vehicles are prone to cracking and failure from extreme thermal cycles and corrosion. This convenient Dorman OE FIX hardware kit contains ten application-specific M8-1.25 studs and nuts made of 100 percent stainless steel that provide superior strength and resistance to corrosion. These fasteners are precision-manufactured to match the fit and function of the original equipment hardware, and help ensure a professional and more durable repair. The kit contains the studs and nuts required to install one exhaust manifold.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of ten M8-1.25 exhaust manifold mounting studs and nuts are 100 percent stainless steel for superior heat and corrosion resistance
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Exhaust Manifold Heat Shield (Part No.674-697HS)
from
$15.99
Replace a loose or missing exhaust manifold heat shield without replacing the manifold itself. This direct replacement heat shield has been dimensionally verified to match the original and undergone material testing to ensure a reliable service life.
Product Features:
See More
Product Features:
- Effective replacement – designed to match the fit and function of the stock exhaust manifold heat shield on specific vehicle applications
- Durable construction – this heat shield is made of stamped steel to withstand underhood heat and conditions
- Cost-effective solution – replaces a damaged or missing heat shield without replacing the exhaust manifold
- Precision-engineered – has undergone dimensional verification and material testing to ensure quality
Top-Rated Exhaust Parts Brands For Your 2012 Lincoln Navigator
Shop for the best-rated brands offering Exhaust Parts and other products for your 2012 Lincoln Navigators. Below you’ll find some of our best rated Exhaust Parts from Dorman and Walker, and more. Exhaust Parts from these brands that fit a 2012 Navigator start at just $3.99 and are rated as high as 4.2 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Dorman 2012 Lincoln Navigator Exhaust Parts
When it comes to maintaining or upgrading your 2012 Lincoln Navigator, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Exhaust Parts, specifically designed for the 2012 Lincoln Navigator. With over 3 Dorman brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $69.32. Plus, with over 15 customer reviews and an average rating of 4.2 stars, you can trust that our Dorman Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$152.99
(8)
Exhaust Manifold Kit – Includes Required Gaskets and Hardware (OE Fix)
“Good product… made well.. great price”
from
$14.99
(6)
Exhaust Manifold Hardware Kit
“Exhaust manifold studs and nuts, fit and work great.”
Popular Walker 2012 Lincoln Navigator Exhaust Parts
Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 2012 Lincoln Navigator owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 2012 Navigator, Advance Auto Parts carries a full inventory of 3 Walker Exhaust Parts. Plus you will be keeping your Lincoln in peak condition while saving money because prices on these Walker Exhaust Parts range from $3.99 to $163.99, plus, with more than 10 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$163.99
(3)
Quiet-Flow SS Direct Fit Exhaust Muffler Assembly
“The part fit great and quality wasn’t bad.”
FAQs for 2012 Lincoln Navigator Exhaust Parts
Which Exhaust Parts are best-sellers for 2012 Lincoln Navigators?
Out of 33 Exhaust Parts that fit 2012 Lincoln Navigators, the following parts are the top sellers:
- Exhaust Clamp (26010018) – $3.99
- Exhaust Flange Hardware Kit (10840997) – $16.29
- Exhaust Manifold Gasket Set (11464851) – $32.49
What’s the price range for 2012 Lincoln Navigator Exhaust Parts?
Exhaust Part prices for the 2012 Lincoln Navigator start at $3.99 and go up to $1,646.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2012 Lincoln Navigator?
The average price for Exhaust Parts for the 2012 Lincoln Navigator is $286.36. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Lincoln Navigator model years?
What are the cheapest Exhaust Parts for my 2012 Lincoln Navigator?
The cheapest 2012 Lincoln Navigator Exhaust Parts we carry in stock are:
- Exhaust Clamp (26010018) – $3.99
- Exhaust Clamp (50169827) – $5.79
- Exhaust Clamp (11012146) – $8.99
- Exhaust Pipe Flange Gasket (18371080) – $13.79
- Exhaust Manifold Hardware Kit (10242452) – $14.99
What are the top-rated Exhaust Parts that fit the 2012 Lincoln Navigator?
Out of 119 reviews by customers, our 2012 Lincoln Navigator Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2012 Lincoln Navigator and their top-rated products:
- Exhaust Fittings
- Exhaust Clamp (26010018) – $3.99
- Exhaust Mufflers
- Exhaust Clamp (26010018) – $3.99
What types of Exhaust Parts do you sell for my 2012 Lincoln Navigator?
As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 2012 Lincoln Navigator:
Can I get help with 2012 Lincoln Navigator Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lincoln Exhaust Parts and more.
What is your return policy for Lincoln Navigator Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Lincoln Navigator Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
