2012 Lexus IS F Ignition and Tune-Up Products

Below you will find various in-demand Lexus Ignition and Tune-Up Products, components and accessories for your 2012 IS F. Advance Auto Parts has popular IS F parts like Ignition Boots, Distributors, Ignition Switches and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other IS F model years including 2008, 2009, 2010, 2011, 2013, 2014 and more. Select a category of 2012 Lexus IS F Ignition and Tune-Up Products below and start saving instantly.

Popular 2012 Lexus IS F Ignition and Tune-Up Products Categories

Direct Ignition Coil Cassettes

Ignition Switch Bulbs

Ignition Coil Connectors

Ignition Starter Switches

Air Distribution Duct Clips

Essential Ignition and Tune-Up Products for 2012 Lexus IS Fs

from

$7.99

Product Features:

PREMIUM GRADE SILICONE: Designed to withstand harsh environments
OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
LIMITED WARRANTY: See package for details

from

$6.99

Double Platinum Spark Plug offers enhanced durability and performance with its platinum-to-platinum design, effectively reducing gap erosion and minimizing misfires for a longer service life. Engineered for distributor-less ignition system (DIS) engines, it outperforms copper and standard platinum plugs. The yttrium-enhanced ground electrode ensures superior heat transfer, maintaining durability under high temperatures and pressure. Its high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. Featuring a mid-projection center electrode and flat seat type, this performance-grade spark plug is built with platinum-tipped electrodes for consistent ignition and lasting reliability. Designed to deliver exceptional value, it is a dependable choice for maintaining peak engine performance.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed with a mid-projection center electrode and flat seat type to ensure consistent ignition and reliable performance in demanding conditions.

from

$10.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience and expertise.
Gasket Seat Type: Ensures a secure and proper fit for optimal performance.

from

$13.49

The Iridium TT Spark Plug combines the durability of an OE-style plug with the power and torque of high-performance engineering, making it a standout choice for demanding drivers. Featuring a 0.4mm Iridium Center Electrode – the world’s smallest diameter – it maximizes firing potential for superior ignition. The 0.7mm Needle Tip Ground Electrode enhances spark energy while reducing heat quenching, ensuring consistent performance. Built with DENSO’s patented Iridium-Rhodium alloy formula, this spark plug boasts the highest concentration of iridium among competitors, delivering unmatched durability and reliability. The 360-degree laser welding process ensures a robust bond and structural integrity, even under extreme conditions. With the ability to withstand temperatures exceeding 4000 Deg F, this plug is engineered for endurance and peak performance. Its flat seat type and advanced materials make it a perfect fit for those seeking long-lasting, high-quality ignition components.

Product Features:

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power and Torque of high performance.
Withstands temperatures greater than 4000 degree Fahrenheit
Iridium TT

from

$391.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$23.99

Upgrade your vehicle with ZEVO® LED miniature bulbs for added style, performance, and the many benefits of LEDs. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, ZEVO replacement bulbs are backed by a limited warranty to provide exceptional performance through the life of the vehicle. Also available in an array of colors to update your car or truck.

Product Features:

HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
NON-POLARITY DESIGN: Plug & play easy installation; SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color.
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$111.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$23.99

This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$165.99

Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Trivalent iridescent chromate plating prevents corrosion
Silicone seals prevent moisture intrusion preventing false codes and sensor failure
Wiring harnesses utilize high-temperature insulation when applicable
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$162.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$181.99

The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock or detonation to alter the ignition timing and prevent detonation. A piezoelectric crystal generates a varying voltage based upon engine vibration intensity to delay ignition timing to help prevent severe and costly engine damage. Reasons for replacement include check engine light illumination, engine hesitation, poor fuel economy or failed emissions test.

Product Features:

ADVANCED TECHNOLOGY: Manufactured to operation performance standards to meet or exceed OE fit, form, and function to ensure proper ignition timing.
INSTALLATION AND SUPPORT: Mounting threads, harness length and wire gauge match OE for easy, worry free installation.
THE DIFFERENCE: Reinforced components are used to reduce the chance of part failure and prevent corrosion and moisture penetration. Shielded harness prevents electrical interference.

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$6.49

Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.

Product Features:

OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the spark plug boot
Design for direct compatibility

from

$83.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$83.99

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$192.99

Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$68.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$61.99

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$84.99

As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

Upgrade your 2012 Lexus IS F with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2012 Lexus IS F, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lexus or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your IS F functioning at its best. At Advance Auto Parts, we offer a wide selection of 30 Ignition and Tune-Up Products for the 2012 Lexus IS F, designed to meet your needs without breaking the bank. From Ignition Boot replacements to Distributors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2012 Lexus IS F at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $2.99 to $391.99, with an average price of $60.92. Our 30 Ignition and Tune-Up Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 2012 Lexus IS F without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2012 Lexus IS F, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Autolite, DENSO, Dorman, and more. Autolite Ignition and Tune-Up Products start at just $3.99 and boast an impressive 4.6 stars average rating from customers. DENSO and Dorman also bring quality to the table, with Ignition and Tune-Up Products available starting at $4.99, and at an average 4.6 stars rating. With 515 customer reviews and counting, our 2012 Lexus IS F Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Lexus IS F is always ready to roll. We’re committed to providing you with everything you need to keep your IS F in top shape, all in one place. Start shopping confidently below for your 2012 Lexus IS F!

Best-Selling Ignition Boots for 2012 Lexus IS Fs

Enhance the driving experience in your Lexus with 1 quality Ignition Boot components, starting at $7.99.

show more show less

from

$7.99

Product Features:

PREMIUM GRADE SILICONE: Designed to withstand harsh environments
OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
LIMITED WARRANTY: See package for details

Top Picks for 2012 Lexus IS F Ignition Switches

Upgrade Lexus IS Fs with top-quality Ignition Switches parts, including 2 OEM and aftermarket selections for your 2012 model.

show more show less

from

$23.99

HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
NON-POLARITY DESIGN: Plug & play easy installation; SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color.
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$391.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

In-Demand Ignition Coils and Boots for 2012 Lexus IS Fs

Select from 9 premium Ignition Coils and Boots parts for your 2012 Lexus IS F, with prices ranging from $6.49 to $192.99.

show more show less

from

$23.99

Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$84.99

First Time Fit
Built to DENSO Original Equipment Standards

from

$68.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$83.99

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$61.99

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$6.49

OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the spark plug boot
Design for direct compatibility

from

$111.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$192.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$83.99

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

Most Sold 2012 Lexus IS F Spark Plugs

Explore our best-selling Lexus parts for the 2012 IS F among 13 OEM and aftermarket options starting from $2.99.

show more show less

from

$13.49

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power and Torque of high performance.
Withstands temperatures greater than 4000 degree Fahrenheit
Iridium TT

from

$3.99

Autolite Copper spark plugs are designed to deliver reliable performance, ensuring quick starts and the power your vehicle demands. Featuring a copper core center electrode, these plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrodes provide extended life and durability. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, offering superior strength. With a corrosion-resistant nickel-plated shell, these spark plugs are built to withstand the test of time. Engineered for optimal fuel efficiency, they help you save on gas while delivering smooth acceleration for an improved driving experience. Meeting or exceeding Original Equipment Service (OES) design Standards, Autolite Copper spark plugs are a trusted choice backed by over a century of engineering expertise and the sale of over 11 billion plugs. Designed with a flat seat type and mid-projection standard electrode, these spark plugs are the industry standard for dependable performance.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you get the most out of every gallon of gas.
Smooth Acceleration: Experience seamless and smooth acceleration with Autolite Copper Core spark plugs, enhancing your driving experience.
OES Design Compliance: These spark plugs are crafted to meet or exceed Original Equipment Service (OES) design requirements, ensuring high-quality performance.
Industry Standard: Autolite Copper Core spark plugs are recognized as the industry standard, backed by over 100 years of engineering expertise and the sale of over 11 billion plugs.

from

$8.99

The Double Platinum Power Spark Plug is engineered for drivers seeking enhanced performance and durability. Featuring a fine-wire platinum center electrode and a platinum pad ground electrode, this premium spark plug ensures greater wear resistance and sharper spark focus for reliable ignition. Its Heat-Active alloy optimizes electrode temperature under all engine loads, delivering consistent performance and improved ignitability. The V-trimmed ground electrode further enhances spark precision, while the flat seat design ensures a secure fit. Designed as a standard replacement, this spark plug is equipped with a resistor to minimize electrical interference. Built to maintain stable operating temperatures and withstand demanding conditions, it offers long-lasting performance and exceptional value for your vehicle.

Product Features:

Double Platinum Power – Premium Spark Plug. More Powerful Performance.
Platinum center and ground electrode for greater wear resistance
Maintains stable operating temperature under all engine loads
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature

from

$10.99

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience and expertise.
Gasket Seat Type: Ensures a secure and proper fit for optimal performance.

from

$4.99

Autolite Platinum spark plugs are crafted for superior performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, better acceleration, and improved fuel efficiency. The platinum firing tip resists gap erosion, extending service life, while the high alumina ceramic insulator enhances thermal conductivity and insulation for added strength. A multi-rib insulator prevents flash-over, and the nickel-plated shell offers exceptional corrosion resistance for long-lasting durability. Designed with a mid-projection standard center electrode and nickel ground electrode tip, these spark plugs deliver reliable performance under demanding conditions. Engineered in the USA with over a century of expertise and backed by the sale of over 11 billion plugs, Autolite Platinum spark plugs are a trusted choice for drivers seeking enhanced engine efficiency and durability.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Engineered in the USA: Backed by over 100 years of engineering expertise and over 11 billion plugs sold.

from

$6.99

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed with a mid-projection center electrode and flat seat type to ensure consistent ignition and reliable performance in demanding conditions.

from

$8.49

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.68 is a 14mm, 1.000 reach plug with a gasket seat. It fits a wide variety of late model applications, especially Hemi applications. E3.68 is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
Wide Compatibility: E3.68 spark plugs are 14mm with a 1.000 reach and a gasket seat, fitting a wide variety of late model applications, especially Hemi engines.
Enhanced Heat Transfer: The three legs securing the Diamond FIRE electrode to the shell ensure excellent heat transfer and create more turbulence in the cylinder for better combustion.
Widely Available: E3.68 spark plugs are widely stocked in automotive retail stores, making them easily accessible for consumers.

from

$23.99

Engineered for unmatched performance, this Iridium Long-Life Spark Plug is crafted to meet the highest OE standards for durability, emissions, and ignition efficiency. Featuring DENSO’s patented Iridium Alloy with a fine wire center electrode, it delivers superior spark energy while minimizing heat quenching. The Platinum Needle Tip Ground Electrode enhances ignition reliability, and the 360-degree laser welding process ensures a robust bond and structural integrity. Designed to endure extreme temperatures exceeding 4,000 Deg F, this spark plug is built for high-performance ignition systems and special fuel setups. With a lifespan of over 100,000 miles, it lasts up to three times longer than conventional plugs, offering exceptional value and reduced maintenance. Its flat seat type ensures a secure fit, while the advanced Iridium Long Life (SIP) technology guarantees sustained performance for demanding driving conditions. Choose this spark plug for a reliable, long-lasting solution that keeps your engine running at peak efficiency.

Product Features:

Latest OE technology with DENSO’s patented Iridium Alloy (90 percent Ir) and fine wire center electrode
Platinum Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Sustained spark performance over 100,000 miles
Lasts up to three times as long as conventional plugs
Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
Iridium Long Life (SIP)

from

$10.99

Autolite Iridium Ultra Laser Fine wire Spark Plugs are one of our brand’s most technologically advanced products. These spark plugs provide superior durability, more focused ignition with better overall ignitability for optimum performance. Autolite Spark Plugs are the best alternative to OE spark plugs, offering OE fit form and function supporting all foreign and domestic makes and models at a value price. Autolite provides the automotive aftermarket and original equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs in the world.

Product Features:

Autolite Iridium Ultra is an engineered OE replacement iridium spark plug.
A laser-welded 0.5mm pure iridium finewire center electrode provides optimal fuel efficiency, acceleration and focused ignitability.
Nickel-plated shell to resist corrosion.
High-alumina ceramic insulator for increased strength.
Laser welded 0.5mm Iridium finewire center electrode.
Proprietary platinum sidewire technology.

from

$15.99

NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug, Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:

HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology

from

$12.99

The Champion Iridium Spark Plug is engineered for maximum performance and longevity, making it a premium choice for your vehicle. Featuring a fine-wire iridium center electrode and a V-trimmed iridium-platinum ground electrode, this spark plug ensures sharper spark focus and greater ignitability for optimal engine efficiency. Its Heat-Active alloy design allows the electrodes to quickly reach and maintain stable operating temperatures under all engine loads, ensuring consistent performance. The iridium center electrode is built for maximum life, while the flat seat type and integrated resistor enhance compatibility and reliability. Whether you’re looking to boost performance or maintain durability, this high-grade performance spark plug is designed to meet the demands of modern engines.

Product Features:

Champion Iridium – Maximum Performance. Premium Spark Plug
Iridium center electrode delivers maximum life
Fine-wire center electrode and V-trimmed for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Maintains stable operating temperature under all engine loads
Heat-Active alloy allows electrodes to reach optimal temperature quickly

from

$38.99

NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and dur

Product Features:

ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: DFE tip and iridium alloy center electrode produce the most advanced OE spark plug technology
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
DFE DESIGN: Double fine electrode (platinum pin) provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE DFE iridium alloy plugs

from

$2.99

Copper Plus spark plug delivers reliable performance and durability, making it an excellent choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, it ensures precise heat range control, promoting longer life and consistent functionality. The nickel-tipped center and ground electrodes enhance conductivity while resisting corrosion, ensuring dependable ignition performance over time. Designed to meet ISO and SAE Standards, this spark plug guarantees proven reliability and compatibility with standard replacement needs. Its flat seat type and built-in resistor further contribute to optimal performance, making it a practical and value-driven solution for your engine’s ignition system.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Nickel-tipped center and ground electrodes enhance conductivity for consistent ignition performance.

Top-Rated Ignition and Tune-Up Products Brands For Your 2012 Lexus IS F

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 2012 Lexus IS Fs. Below you’ll find some of our best rated Ignition and Tune-Up Products from Autolite, DENSO, and Dorman, and more. Ignition and Tune-Up Products from these brands that fit a 2012 IS F start at just $3.99 and are rated as high as 4.6 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Autolite 2012 Lexus IS F Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2012 Lexus IS F, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Autolite ticks all of those boxes. We offer a wide selection of Autolite Ignition and Tune-Up Products, specifically designed for the 2012 Lexus IS F. With over 3 Autolite brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99, with an average price of just $6.66. Plus, with over 298 customer reviews and an average rating of 4.6 stars, you can trust that our Autolite Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $4.99

(131)

Platinum Spark Plug: Enhanced Durability & Improved Performance

“Perfect fit, runs better”

from $10.99

(166)

Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition

“Great”

from $3.99

(1)

Copper Resistor Spark Plug: Quick Starts & Enhanced Durability

“Comes pre gapped and affordable”

Popular DENSO 2012 Lexus IS F Ignition and Tune-Up Products

DENSO auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 2012 Lexus IS F owner should feel confident when installing genuine DENSO parts in their vehicle. To ensure the best fit and performance for your 2012 IS F, Advance Auto Parts carries a full inventory of 2 DENSO Ignition and Tune-Up Products. Plus you will be keeping your Lexus in peak condition while saving money because prices on these DENSO Ignition and Tune-Up Products range from $13.49 to $23.99, plus, with more than 33 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $13.49

(12)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IKBH20TT

“Truck wasn’t showing check engine light or engine codes. Engine felt rough and sluggish at all speeds and fuel types, injection cleaning, etc. After d”

from $23.99

(21)

Iridium Long-Life Spark Plug: Super Ignition, OE Performance, FK20HBR11

“EXELENTE bujias. Buena calidad.”

FAQs for 2012 Lexus IS F Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2012 Lexus IS Fs?

Out of 30 Ignition and Tune-Up Products that fit 2012 Lexus IS Fs, the following parts are the top sellers:

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (19650207) – $8.49
Iridium Ultra Fine Wire Spark Plug: Laser Welded for Precision (12102063) – $10.99
Iridium Long-Life Spark Plug: Super Ignition, OE Performance, FK20HBR11 (10477937) – $23.99

What’s the price range for 2012 Lexus IS F Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2012 Lexus IS F start at $2.99 and go up to $391.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2012 Lexus IS F?

The average price for Ignition and Tune-Up Products for the 2012 Lexus IS F is $60.92. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Lexus IS F model years?

Yes, we currently carry Ignition and Tune-Up Products for 5 model years of Lexus IS Fs between 2008 and 2014. Ignition and Tune-Up Products are bought most frequently for the following model years: 2014, 2013, 2011, 2010, 2009, and 2008.

What are the cheapest Ignition and Tune-Up Products for my 2012 Lexus IS F?

The cheapest 2012 Lexus IS F Ignition and Tune-Up Products we carry in stock are:

Copper Plus Spark Plug (REC10YC4): Dependable Performance & Durability (11406504) – $2.99
Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (11015588) – $3.99
Grill Retainer Head Dia. 0.73 In. Shank Length 0.33 In. Hole Dia. 0.27 In. (11077079) – $4.29
Platinum Spark Plug: Enhanced Durability & Improved Performance (11015495) – $4.99
Toyota Bumper Retainer (11910688) – $4.99

What are the top-rated Ignition and Tune-Up Products that fit the 2012 Lexus IS F?

Out of 515 reviews by customers, our 2012 Lexus IS F Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 2012 Lexus IS F and their top-rated products:

Spark Plugs
- Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IKBH20TT (10713005) – $13.49
- Double Platinum Power Spark Plug (REC10PYPB4): Enhanced Ignitability & Durability (10095040) – $8.99
- Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (11015588) – $3.99
Ignition Coils and Boots
- Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IKBH20TT (10713005) – $13.49
- Double Platinum Power Spark Plug (REC10PYPB4): Enhanced Ignitability & Durability (10095040) – $8.99
- Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (11015588) – $3.99
Ignition Switches
- Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IKBH20TT (10713005) – $13.49
- Double Platinum Power Spark Plug (REC10PYPB4): Enhanced Ignitability & Durability (10095040) – $8.99
- Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (11015588) – $3.99

What types of Ignition and Tune-Up Products do you sell for my 2012 Lexus IS F?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2012 Lexus IS F:

Can I get help with 2012 Lexus IS F Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lexus Ignition and Tune-Up Products and more.

What is your return policy for Lexus IS F Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Lexus IS F Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Lexus IS F Ignition and Tune-Up Products

NGK – Direct Ignition Coil on Plug Boot: Premium Silicone (Part No.59009)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP5325)

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5325)

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IKBH20TT (Part No.4705)

Carquest Premium – Ignition Switch (Part No.CSC1952)

Sylvania – 194 ZEVO: White LED Mini Bulb, Super Bright, 2 Pack (Part No.194LED.BP2)

Carquest Premium – Multi-Use Connector (Part No.PTA1472)

Dorman – Ignition Coil Connector (Part No.645-940)

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA4133)

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3674)

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0215)

Dorman – Toyota Bumper Retainer (Part No.963-634D)

Dorman – Grill Retainer Head Dia. 0.73 In. Shank Length 0.33 In. Hole Dia. 0.27 In. (Part No.963-634)

Carquest Premium – Spark Plug Boot: 1 Boot, Meets or Exceeds OE Specifications (Part No.35-7117)

NGK – Premium COP Pencil Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48926)

Delphi – Ignition Coil (Part No.GN10323)

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count (Part No.EBC1828-4)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1828)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1052)

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-1308)

NGK – Direct Ignition Coil on Plug Boot: Premium Silicone (Part No.59009)

Dorman – Toyota Bumper Retainer (Part No.963-634D)

Dorman – Grill Retainer Head Dia. 0.73 In. Shank Length 0.33 In. Hole Dia. 0.27 In. (Part No.963-634)

Sylvania – 194 ZEVO: White LED Mini Bulb, Super Bright, 2 Pack (Part No.194LED.BP2)

Carquest Premium – Ignition Switch (Part No.CSC1952)

Dorman – Ignition Coil Connector (Part No.645-940)

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-1308)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1828)

NGK – Premium COP Pencil Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48926)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1052)

Carquest Premium – Spark Plug Boot: 1 Boot, Meets or Exceeds OE Specifications (Part No.35-7117)

Carquest Premium – Multi-Use Connector (Part No.PTA1472)

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count (Part No.EBC1828-4)

Delphi – Ignition Coil (Part No.GN10323)

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IKBH20TT (Part No.4705)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.5325)

Champion – Double Platinum Power Spark Plug (REC10PYPB4): Enhanced Ignitability & Durability (Part No.7975)

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5325)

Autolite – Platinum Spark Plug: Enhanced Durability & Improved Performance (Part No.AP5325)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP5325)

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.68)

DENSO – Iridium Long-Life Spark Plug: Super Ignition, OE Performance, FK20HBR11 (Part No.3473)

Autolite Iridium – Iridium Ultra Fine Wire Spark Plug: Laser Welded for Precision (Part No.AI5325)

NGK – Ruthenium HX Spark Plug (LFR6AHX-S): High Ignitability & Durability (Part No.94122)

Champion – Iridium Spark Plug (REC10WMPB): Maximum Performance & Longevity (Part No.9010)

NGK – Laser Iridium Spark Plug (DFH6B-11A): High Ignitability & Durability (Part No.6858)

Champion – Copper Plus Spark Plug (REC10YC4): Dependable Performance & Durability (Part No.975)