2012 Kia Optima Body Parts

Below you will find various in-demand Kia Body Parts, components and accessories for your 2012 Optima. Advance Auto Parts has popular Optima parts like Vehicle Windows, Vehicle Doors, Vehicle Hoods and more. You’ll also find aftermarket and OEM Body Parts for other Optima model years including 2011, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 and more. Select a category of 2012 Kia Optima Body Parts below and start saving instantly.

Popular 2012 Kia Optima Body Parts Categories

Window Regulators

Rear Spoiler and Wings

Lift Supports

Grilles

Exterior Door Handles

Hood Release Cables

Door Lock Solenoid Connectors

Bumper Pad Retainer Strips

Bumper Impact Absorbers

Mirror Replacement Glass

Front End Covers

Bumper Cover Support Rails

Body Side Molding Clips

Essential Body Parts for 2012 Kia Optimas

from

$26.99

New Standard Replacement Front Lower Valance Panel, For Sx/Sport Models, Black Textured

Product Features:

For SX/Sport Models, Black Textured, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$18.99

Trunk release cable stretched or broke? This cable directly replaces the original to fully restore operation on specific vehicle years, makes and models.

Product Features:

Direct replacement – this trunk lid release cable matches the design and function of the original cable on specified vehicles
Durable design – built to high standards to prevent future failures
Application specific – reverse engineered from the original design on certain vehicles to provide an exact fit
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$42.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$166.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new standard replacement passenger side power door mirror, with heated glass, paint to match, usa built models. It is designed to replace your existing passenger side door mirror. Check to be sure it fits your vehicle.

Product Features:

With Heated Glass, Paint To Match, USA Built Models, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$48.99

AISIN Window Regulator Assemblies and Motors are mechanical and electrical components that work together to raise and lower the power windows in a vehicle. The window regulator assembly is the mechanical component that consists of gears, tracks and other parts that move the window up and down. The electric motor is the component that provides the power to move the window. Together, they form the power window system that allows the driver and passengers to easily raise and lower the windows with the push of a button.

Product Features:

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$41.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$80.99

New CAPA Certified Premium Replacement Front Bumper Impact Absorber, All 2011 Models, 2012-2013 Korean Built And Hybrid Models

Product Features:

All 2011 Models, 2012-2013 Korean Built And Hybrid Models, Made Of Expanded Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$16.99

New Standard Replacement Driver Side Rear Bumper Cover Upper Retainer

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$35.49

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

Direct replacement – this hood release cable is made to match the original cable on specific vehicles
Durable construction -manufactured within strict tolerances for reliable longevity
Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$54.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$56.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$264.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem standard replacement grille, chrome, korea built, ex/lx models. It is designed to replace your existing front grille. Check to be sure it fits your vehicle.

Product Features:

Chrome, Korea Built, EX/LX Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$354.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement front grille, for use without adaptive cruise, bright black with upper/lower bright chrome molding, for lx and select ex models. It is designed to replace your existing grille. Check to be sure it fits your vehicle.

Product Features:

For Use Without Adaptive Cruise, Bright Black With Upper/Lower Bright Chrome Molding, For LX And Select EX Models, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$2.99

This exterior molding clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this exterior molding clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.99

New Standard Replacement Driver Side Front Bumper Cover Reinforcement Bracket

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$10.99

New Standard Replacement Passenger Side Front Bumper Cover Reinforcement Bracket

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$249.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new standard replacement front bumper cover grille, for use with adaptive cruise, gloss black with chrome outer molding, for sx and sxl models. It is designed to replace your existing front bumper cover grille. Check to be sure it fits your vehicle.

Product Features:

Gloss Black With Chrome Outer Molding, For SX And SXL Models, For Use With Adaptive Cruise, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$249.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new standard replacement front bumper cover grille, gloss black with chrome outer molding, for sx and sxl models, for use without adaptive cruise. It is designed to replace your existing front bumper cover grille. Check to be sure it fits your vehicle.

Product Features:

Gloss Black With Chrome Outer Molding, For SX And SXL Models, For Use Without Adaptive Cruise, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$204.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new standard replacement front bumper cover grille, for ex and sx models, for use without projector fog light in grille [includes lh and rh hole covers], for use with adaptive cruise, painted black finish. It is designed to replace your existing front bumper cover grille. Check to be sure it fits your vehicle.

Product Features:

For Ex And Sx Models, For Use Without Projector Fog Light In Grille [Includes Lh And Rh Hole Covers], For Use With Adaptive Cruise, Painted Black Finish, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$64.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$69.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$29.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$88.99

New Standard Replacement Driver Side Fender Liner, 2011 All, 2012-2013 EX/LX Korea Built, 2011-2013 Hybrid

Product Features:

2011 All, 2012-2013 EX/LX Korea Built, 2011-2013 Hybrid, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$79.99

New Standard Replacement Driver Side Fender Liner, Korea Built Models

Product Features:

Korea Built Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$76.99

New Standard Replacement Passenger Side Fender Liner, USA Built EX/LX Models

Product Features:

USA Built EX/LX Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Upgrade your 2012 Kia Optima with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2012 Kia Optima, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Kia or enhancing its overall performance, Body Parts are key to keeping your Optima functioning at its best. At Advance Auto Parts, we offer a wide selection of 43 Body Parts for the 2012 Kia Optima, designed to meet your needs without breaking the bank. From Vehicle Window replacements to Vehicle Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2012 Kia Optima at great prices. Our Body Parts inventory for this model ranges from just $2.99 to $329.99, with an average price of $91.48. Our 43 Body Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2012 Kia Optima without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2012 Kia Optima is always ready to roll. We’re committed to providing you with everything you need to keep your Optima in top shape, all in one place. Start shopping confidently below for your 2012 Kia Optima!

Best-Selling Vehicle Windows for 2012 Kia Optimas

Enhance the driving experience in your Kia with 4 quality Vehicle Window components, starting at $129.99.

show more show less

from

$295.99

WINDOW REGULATOR

from

$198.99

WINDOW REGULATOR

from

$154.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$129.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

Top Picks for 2012 Kia Optima Vehicle Hoods

Upgrade Kia Optimas with top-quality Vehicle Hoods parts, including 3 OEM and aftermarket selections for your 2012 model.

show more show less

from

$60.99

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$35.49

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

Direct replacement – this hood release cable is made to match the original cable on specific vehicles
Durable construction -manufactured within strict tolerances for reliable longevity
Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

In-Demand Vehicle Latches and Handles for 2012 Kia Optimas

Select from 2 premium Vehicle Latches and Handles parts for your 2012 Kia Optima, with prices ranging from $54.99 to $56.99.

show more show less

from

$56.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$54.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Most Sold 2012 Kia Optima Bodies and Fender Parts

Explore our best-selling Kia parts for the 2012 Optima among 12 OEM and aftermarket options starting from $2.99.

show more show less

from

$88.99

New Standard Replacement Driver Side Fender Liner, 2011 All, 2012-2013 EX/LX Korea Built, 2011-2013 Hybrid

Product Features:

2011 All, 2012-2013 EX/LX Korea Built, 2011-2013 Hybrid, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$88.99

New Standard Replacement Passenger Side Fender Liner, 2011 All, 2012-2013 EX/LX Korea Built, 2011-2013 Hybrid

Product Features:

2011 All, 2012-2013 EX/LX Korea Built, 2011-2013 Hybrid, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$2.99

Direct replacement – this exterior molding clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$159.99

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$159.99

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$76.99

New Standard Replacement Passenger Side Fender Liner, USA Built EX/LX Models

Product Features:

USA Built EX/LX Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$73.99

New Standard Replacement Driver Side Fender Liner, USA/Korea Built SX Models

Product Features:

USA/Korea Built SX Models, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$72.99

New Standard Replacement Driver Side Fender Liner, USA Built EX/LX Models

Product Features:

USA Built EX/LX Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$65.99

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$54.99

New Standard Replacement Driver Side Fender Liner, USA Built SX Models

Product Features:

USA Built SX Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$52.99

New Standard Replacement Passenger Side Fender Liner, USA Built SX Models

Product Features:

USA Built SX Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$26.99

New Standard Replacement Front Lower Valance Panel, For Sx/Sport Models, Black Textured

Product Features:

For SX/Sport Models, Black Textured, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

FAQs for 2012 Kia Optima Body Parts

Which Body Parts are best-sellers for 2012 Kia Optimas?

Out of 43 Body Parts that fit 2012 Kia Optimas, the following parts are the top sellers:

Kia Nylon Nut (11911017) – $4.99
New Standard Replacement Front Lower Bumper Grille, Matte-Black (11752399) – $18.99
Fender Liner (11727109) – $88.99

What’s the price range for 2012 Kia Optima Body Parts?

Body Part prices for the 2012 Kia Optima start at $2.99 and go up to $329.99 for the most premium parts.

What’s the average price of a Body Part for a 2012 Kia Optima?

The average price for Body Parts for the 2012 Kia Optima is $91.48. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Kia Optima model years?

Yes, we currently carry Body Parts for 18 model years of Kia Optimas between 2001 and 2020. Body Parts are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2011.

What are the cheapest Body Parts for my 2012 Kia Optima?

The cheapest 2012 Kia Optima Body Parts we carry in stock are:

Moulding Retainer Head Dia 0.666 X 0.6In Shank Lng 0.56 In Hole Dia 0.428In (11381379) – $2.99
Kia Nylon Nut (11911017) – $4.99
Anchor Clip-Hood Retainer – 12 mm Hole, 13 mm Stem, 26 mm Head (12563339) – $4.99
Bumper Cover Support Rail (11752622) – $10.99
Bumper Cover Support Rail (11752425) – $11.99

What types of Body Parts do you sell for my 2012 Kia Optima?

As of 11/2/25, these are some of the most in-demand types of Body Parts for a 2012 Kia Optima:

Can I get help with 2012 Kia Optima Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Kia Body Parts and more.

What is your return policy for Kia Optima Body Parts?

Advance Auto Parts keeps returns simple. For new Kia Optima Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2012 Kia Optima Body Parts

KAI – Spoiler (Part No.KI1093100)

Dorman – Trunk Latch Release Cable (Part No.912-319)

Carquest Premium – Multi-Use Connector (Part No.PTC1134)

KAI – New Standard Replacement Door Mirror (Part No.KI1321220)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPK-015)

StrongArm – Hood Lift Support: 16.87" Ext Length, 6.25" Travel, 65 Lbs of Force, 1 Pk (Part No.D7005)

Le Bra – Custom Front End Cover (Part No.551333-01)

KAI – Bumper Impact Absorber (Part No.KI1070124C)

Dorman – Anchor Clip-Hood Retainer – 12 mm Hole, 13 mm Stem, 26 mm Head (Part No.963-097D)

KAI – Bumper Cover Retainer (Part No.KI1132100)

Dorman – Kia Nylon Nut (Part No.961-302D)

Dorman – Hood Release Cable Assembly Pair (Part No.912-134)

Dorman – Help – Exterior Door Handle, Primed Black (Part No.96670)

Dorman – Help – Exterior Door Handle Black and Chrome (Part No.96623)

KAI – New OEM Standard Replacement Grille (Part No.KI1200143OE)

KAI – New OEM Replacement Grille (Part No.KI1200189OE)

Dorman – Moulding Retainer Head Dia 0.666 X 0.6In Shank Lng 0.56 In Hole Dia 0.428In (Part No.963-568)

KAI – Bumper Cover Support Rail (Part No.KI1026100)

KAI – Bumper Cover Support Rail (Part No.KI1027100)

KAI – New Standard Replacement Bumper Cover Grille (Part No.KI1036162)

KAI – New Standard Replacement Bumper Cover Grille (Part No.KI1036161)

KAI – New Standard Replacement Bumper Cover Grille (Part No.KI1036149)

Burco – Heated Side View Mirror Replacement (Part No.5462H)

Burco – Blind Spot Mirror Replacement (Part No.5613B)

Burco – Side View Replacement Mirror (Part No.5279)

KAI – Fender Liner (Part No.KI1248134)

KAI – Fender Liner (Part No.KI1248132)

KAI – Fender Liner (Part No.KI1249124)

Dorman – WINDOW REGULATOR (Part No.751-168)

Dorman – WINDOW REGULATOR (Part No.751-169)

Dorman – Window Regulator: Power, 1 Pack (Part No.752-945)

Dorman – Power Window Regulator (Regulator Only) (Part No.752-944)

Carquest Premium – Multi-Use Connector (Part No.PTC1134)

StrongArm – Hood Lift Support: 26.75" Ext Length, 11.0" Travel, 85 Lbs of Force, 1 Pk (Part No.C6765)

Dorman – Hood Release Cable Assembly Pair (Part No.912-134)

Dorman – Anchor Clip-Hood Retainer – 12 mm Hole, 13 mm Stem, 26 mm Head (Part No.963-097D)

Dorman – Help – Exterior Door Handle Black and Chrome (Part No.96623)

Dorman – Help – Exterior Door Handle, Primed Black (Part No.96670)

KAI – Fender Liner (Part No.KI1248134)

KAI – Fender Liner (Part No.KI1249134)

Dorman – Moulding Retainer Head Dia 0.666 X 0.6In Shank Lng 0.56 In Hole Dia 0.428In (Part No.963-568)

Le Bra – Custom Front End Cover (Part No.551333-01)

Le Bra – Front End Cover, Vinyl, Black (Part No.551394-01)

KAI – Fender Liner (Part No.KI1249124)

KAI – Fender Liner (Part No.KI1248133)

KAI – Fender Liner (Part No.KI1248124)

Covercraft – Custom Hood Protector (Part No.45735-01)

KAI – Fender Liner (Part No.KI1248123)

KAI – Fender Liner (Part No.KI1249123)

KAI – Spoiler (Part No.KI1093100)