2012 Jeep Wrangler Bumpers

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1997-2006 Wrangler, 2004-2006 Wrangler Unlimited, Bumper Extension Screw, Front or Rear (4 Required Per Extension)

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Plastic
• OE Style
• Direct Fit
• Right Side
• Limited 5 Year Warranty

Get that heavy-duty look with a Bull Bar from Rugged Ridge Each design has been custom designed for your JK Wrangler utilizing tough 3/8-1/4 inch thick heavy-duty mounting brackets. Each Bull Bar offers smooth ground welds and laser cut skid plates. The b

Product Features:

• Black and Stainless Steel
• 3 in. Tubes
• Skid Plate
• Limited 5 Year Warranty

New Standard Replacement Driver Or Passenger Side Front Bumper Guard

Product Features:

• Made Of Rubber, Poly(Acrylic Acid Ester)
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Are you looking for protection or Rugged Ridge D rings? This pair of European styled XHD bumper tow point covers feature a hard-wearing injection molded plastic design that matches the factory one for an overall integrated look. For use with 11540.10 and

Product Features:

• Textured Black
• European Style
• Easily Removable
• Limited 5 Year Warranty

Westins WJ2 Rear Bumper with Tire Carrier is constructed with 3/16-inch plate steel with an 8 gauge tire carrier. The tire carrier is designed to work with or without factory or Westin hitches, and opens and closes with the tailgate. Tapered roller bearings and 2 turnbuckle heim links improve carrier rigidity while its bolt-on spindle allows adjustment of the carrier separate from the bumper. Features integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points, license plate locator, trailer plug, fender gap transition plates, camera back-up relocator and more. Offers a bottom frame mount that helps prevents the bumper from rotating. Product includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

All Rugged Ridge bumpers feature smooth ground welds for an unbelievable look and further rust protection. No other tubular bumper manufacturer goes to the expense of smooth grinding their welds. This exclusive smooth grind process virtually eliminates sm

Product Features:

• Textured Black
• Allows Oversized Spare Tire
• Welded End Caps
• Limited 5 Year Warranty

All Rugged Ridge bumpers feature smooth ground welds for an unbelievable look and further rust protection. No other tubular bumper manufacturer goes to the expense of smooth grinding their welds. This exclusive smooth grind process virtually eliminates sm

Product Features:

• Gloss Black
• Allows Oversized Spare Tire
• Welded End Caps
• Limited 5 Year Warranty

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

• Tough And Durable
• Rugged, Fully Welded Design For Extra Strength
• Accommodates One 20 Inch Light Bar And Two 3 Inch Square Lights
• Easy Bolt-On Installation

Westins WJ2 Stubby Bumper with LED Light Bar Mount is constructed with 3/16-inch plate steel and features a stout LED light bar mount that accommodates a 20 single row light bar. With Westins new WJ2 Stubby Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Bumper features Rock Light mount points on the lower corners of the bumper as well as 2 side and 2 front off-road jack points. Adjustable brackets accept Westin or competitor light bars. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Optional skid plate and light bars both sold separately. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Full Width Front Bumper is constructed with 3/16-inch plate steel. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! It is designed to utilize both styles of factory fog lights or round post lights. Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Product Features:

• Made Of High Strength Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Front Bumper To Body Filler Panel, Plastic [Upper Cover]

Product Features:

• Plastic [Upper Cover], Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Rear Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Front Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The stubby ends from Rugged Ridge feature a tough off road look while providing greater tire clearance for lifted Jeeps. The beefy black powder coated steel end caps extend out to the edge of the grille to offer protection, but leaves the wheel wells open

Product Features:

• Textured Black
• Added Protection
• Modular Design
• Bolt-on
• Limited 5 Year Warranty

New Standard Replacement Driver Side Front Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate

Product Features:

• Textured Black
• With Raiser and Winch Cut Out
• Welded End Caps
• Limited 5 Year Warranty

Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate

Product Features:

• Gloss Black
• With Raiser and Winch Cut Out
• Welded End Caps
• Limited 5 Year Warranty

Rugged Ridge Bumpers have been engineered to the industries most exacting specifications. All powder coated Rugged Ridge bumper products are E-coated to ensure a no rust finish. Rugged Ridge Bumpers can take small rock chips and still maintain their rust

Product Features:

• Stainless Steel
• With Raiser
• Welded End Caps
• Limited 5 Year Warranty

No other bumper can give your Jeep this many looks! The most versatile bumper system ever created, the XHD Modular Bumper System provides dozens of different looks and styles so you can customize your bumper the way you like it. This black powder-coated c

Product Features:

• Textured Black
• Aluminum
• Modular Design
• Winch Plate

Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate

Product Features:

• Stainless Steel
• With Raiser and Winch Cut Out
• Welded End Caps
• Limited 5 Year Warranty

This pair of galvanized 3/4-inch D-shackles from Rugged Ridge is rated to 9,500 lbs. and provides everything you’ll need for recovering stuck Jeeps. Featuring a strong and sturdy construction, their natural high quality stainless steel finish gives them a

Product Features:

• Silver with Red Pin
• 9500Lb Pull Capacity
• Galvanized Steel
• Pair
• 3/4 in.