2012 Jeep Compass Body Parts

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications. Always replace in Pairs, where applicable.
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance.
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function.
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable.
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal.
• Trilingual Install Instructions provided inside each package

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

• Direct replacement – this hood release cable is made to match the original cable on specific vehicles
• Durable construction -manufactured within strict tolerances for reliable longevity
• Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

• Exact fit original equipment design guarantees correct fit and function
• Engineered and built to meet or exceed original equipment quality standards
• Individually tested for performance and reliability
• Hardened, nitride plated steel shaft provides optimal durability
• Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
• Heavy gauge steel body is electrostatically painted and heat cured to OE specs
• Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
• Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
• No special installation tools required
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

New Economy Replacement Hood Panel

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Constructed From Plastic
• Hazardous Free Material
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy To Install

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:

• Protect Your Vehicle And Trailer From Rocks And Messy Conditions
• Universal Fitting
• Easy No Drill Installation
• Perfect Compliment Nerf Bars

Dorman offers a comprehensive line of quality nylon rivets ideal for a range of applications and in a wide variety of sizes and styles. Manufactured from durable materials for reliable performance, these nylon rivets are packaged in a convenient assortment handy for any size automotive, commercial, industrial or household application.

Product Features:

• Comprehensive selection – Dorman offers a comprehensive line of quality nylon rivets for a range of applications, in a wide variety of sizes and styles
• Ensure fit – check product dimensions and styles to select the right assortment for your application
• Buy only what you need – conveniently packaged for any size automotive, commercial, industrial or household application
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:

• Classic Styling Of Brite-Tread Aluminum
• Front Or Rear Wheel Protection
• Radius Notch Contours To The Fender Well
• Protected By A BriteGard Powder Coat Finish

New Standard Replacement Driver Side Fender Liner

Product Features:

• Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:

• Protect Your Vehicle And Trailer From Rocks And Messy Conditions
• Classic Diamond Style Design
• Protected By A BriteGard Powder Coat Finish
• Compliment Brite-Tread Running Boards

New Standard Replacement Passenger Side Fender Liner

Product Features:

• Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

For some, it’s more than just a drive. It’s about definition — finding the rush that comes with your hands on the wheel and your foot on the gas — and it starts by stepping into your vehicle with confidence. ARIES AeroTread running boards give new definition to your drive with their sleek design, full-length treads and flawless finish. They feature unencumbered aluminum construction and a custom contour to redefine your look and offer a solid step up. Made specifically for today’s crossover and SUV, ARIES AeroTread running boards are marked for their aerodynamic look and lightweight build. They are constructed from an extruded aluminum base, making them strong and impervious to the elements. Each set of running boards features sleek, curved edges with tapered ends to seamlessly blend with the body of your vehicle. To give you the exact, customized look you want, AeroTread running boards come with one of two front-trim finish options: polished stainless steel or black carbide powder-coated stainless steel. They are also equipped with a 5″ wide, hard plastic step pad that runs the entire length of the board, providing a non-skid surface no matter where you place your foot. AeroTread running boards install using a track mounting system to attach vehicle-specific brackets, and pre-existing holes in the vehicle’s frame are used to eliminate drilling, speed up installation and ensure stable footing (NOTE: Mounting brackets are sold separately, see the application information to determine which brackets and boards fit your vehicle). The mounting brackets are made from steel and are coated in a powder coat finish for long-lasting dependability. Whatever road you choose, define your drive with ARIES AeroTread running boards.

Product Features:

• Sleek design with rounded ends to complement the look of modern SUVs and CUVs
• Extruded aluminum base to be lightweight and rust-free
• Polished stainless steel front trim piece for a distinct, rust-free accent
• Flat profile and 5″ width provide a comfortable step
• Full-length, tough plastic treads offer a reliable, non-skid surface
• Universal track mounting system for easy, secure installation
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

New Standard Replacement Driver Side Fender Brace

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Fender Brace

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

New CAPA Certified Premium Replacement Driver Side Fender, Made Of Galvanized Steel

Product Features:

• Made Of Galvanized Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Premium Replacement Passenger Side Fender

Product Features:

• Made Of Galvanized Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

This liftgate latch handle is designed to match the fit and function of the original handle on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this liftgate latch handle is designed to match the fit and function of the original handle on specified vehicles
• Restores functionality – this handle is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Want a new interior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new interior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new interior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new interior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership, This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

WINDOW REGULATOR

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
• Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

This door hinge screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this door hinge screw matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Long-Lasting, Durable Crown Automotive Products
• Offers OE Fit And Function
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
• Easy To Install