2012 Jaguar XFR Brake Parts

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Prevents noise and premature wear
• Provides longer brake life and performance

Product Features:

• EuroStop pads have been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
• Rotors coated for optimum anti-corrosion protection
• High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
• Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Pads manufactured in Europe for European applications
• ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Includes 1 Front Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

Product Features:

• EuroStop pads have been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
• Rotors coated for optimum anti-corrosion protection
• High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
• Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Pads manufactured in Europe for European applications
• ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Includes 1 Front & 1 Rear Sensor Wire
• Buy with confidence from the originator & industry leader of brake kits

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Engineered to withstand 120 hours of salt spray testing
• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life
• 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

The Eurospare brake disc is an OE-equivalent replacement that provides original equipment quality and performance.

Product Features:

• OE-Equivalent and a direct fit replacement
• Enhanced heat transfer
• Reduced rotor wear

Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Engineered to withstand 120 hours of salt spray testing
• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to prevent warping
• Air gap eliminates brake fade and increases pad life
• Non-Directional finish decreases break-in time

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Mintex brake pads are developed and engineered to meet a significant demand for cost-effective braking solutions that deliver the optimum balance between performance and extended service life, by providing quality products at affordable prices. The Mintex Friction aftermarket development and manufacturing process follows an identical path to the O.E. product, using the same materials and formulations from the same friction formulation portfolio, as well as the valuable experience gained from initial development of the O.E. product. The result is superior quality replacement products for the aftermarket in a much quicker time and with the confidence that the products will deliver high levels of quality and performance. Developed and engineered to set new standards in aftermarket friction, Mintex brake pads provide the optimum balance of performance and extended service life.

Product Features:

• OE-Equivalent and Direct Fit application.
• Specifically engineered to meet the OE braking requirements
• Ceramic and metallic blended compound.
• Low noise and reduced vibrations.
• Shimmed, chamfered, and slotted to match O.E. design
• Superior friction qualities.

Brake Pad Set

Wearever Silver brake pads are an economical choice for dependable stopping power and quiet braking.

Product Features:

• Dependable stopping power
• Single layer shim for quiet braking

Abutment clips

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• New Brake Hardware prevents premature wear and maximizes performance
• Helps deliver a quieter, more efficient braking system
• Manufactured with quality materials to suppress high stress levels

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Helps deliver a quieter, more efficient braking system
• Corrosion resistant coating for long-lasting durability against harsh roads
• Manufactured with quality materials to suppress high stress levels